• 한국세라믹학회지
• /
• 제36권4호
• /
• pp.333-342
• /
• 1999

This research was performed to investigate how the basic glaze change affected colour development at high temperature with a stable colorant (spinel structure CoAl2O4 pigment) The compounded pigment which is widely used for porcelain was also tested for the basic glazes adaptability. The data from the test were recorded in a computer data-base program. Therefore could be easily used in the study related with a pottery field. CoO : Al2O3 system spinel pigment of barium glaze lime glaze zinc glaze lead glaze and talc glaze were chosen for this study. The colors of Cobalt blue bright blue, blue purple were seen at the wave lengths of 455-480nm at the firing temperature of 1250$^{\circ}C$. Stable color were obtained from lime glaze bar-ium glaze zinc glaze. All the information in the database were used to examine all the possible result of the test in the study of porcelain. When the test results database were examined in all temperature ranges the lack of adhesion with the pigment occurred at the temperature of 1150$^{\circ}C$. The lack of adhesion is seen due to vaporization of the lead glaze.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권5호
• /
• pp.742-747
• /
• 2007

In order to investigate the mechanism of adaptation to long-term heat stress, six female buffalo calves of about 7 to 8 months age, were exposed to the cool-comfort environment (THI 65) for 21 days to obtain normal values of blood acid-base. An adaptive response of acid-base regulation was determined to long term (21 days) exposure of buffalo calves to hot-dry (THI 80) and hot-humid (THI 84) conditions. Higher rectal temperature and respiratory rate was recorded under hot-humid exposure compared to hot-dry. Significant reduction in the rectal temperature and respiratory rate on day 21 of hot-dry exposure indicated early thermal adaptation compared to hot-humid. Decreasing rectal temperature and respiratory rate from day 1 to 21 was associated with concurrent decrease in blood pH and pCO2. Increased plasma chloride concentration with low base excess in blood and in extracellular fluid suggested compensatory response to respiratory alkalosis. Reduced fractional excretion of sodium with increased fractional excretion of potassium and urine flow rate indicated renal adaptive response to heat stress.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.798-802
• /
• 2002

Metallurgical studies on the bonded interlayer of directionally solidified Ni-base superalloy GTD111 joints were carried out during transient liquid phase bonding. The formation mechanism of solid during solidification process was also investigated. Microstructures at the bonded interlayer of joints were characterized with bonding temperature. In the bonding process held at 1403K, liquid insert metal was eliminated by well known mechanism of isothermal solidification process and formation of the solid from the liquid at the bonded interlayer were achieved by epitaxial growth. In addition, grain boundary formed at bonded interlayer is consistent with those of base metal. However, in the bonding process held at 1453K, extensive formation of the liquid phase was found to have taken place along dendrite boundaries and grain boundaries adjacent to bonded interlayer. Liquid phases were also observed at grain boundaries far from the bonding interface. This phenomenon results in liquation of grain boundaries. With prolonged holding, liquid phases decreased gradually and changed to isolated granules, but did not disappeared after holding for 7.2ks at 1473K. This isothermal solidification occurs by diffusion of Ti to be result in liquation. In addition, grain boundaries formed at bonded interlayer were corresponded with those of base metal. In the GTD-ll1 alloy, bonding mechanism differs with bonding temperature.

• 산업기술연구
• /
• 제31권A호
• /
• pp.21-25
• /
• 2011

A comparison of temperature distributions along the fin length coordinate between two different fin tip boundary conditions for a circular pin fin is made by using the one-dimensional analytic method. One tip boundary condition is the actual fin tip boundary condition and fin tip temperature is arbitrarily given for another fin tip boundary condition. The value of the fin base temperature is depend on the fin base thickness and fin radius. One of the results shows that the temperature distribution along the fin length coordinate for the actual fin tip boundary condition and that for the arbitrarily given fin tip temperature are the same if the arbitrarily given fin tip temperature and the fin tip temperature for the actual fin tip boundary condition are the same.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.54-62
• /
• 2016

열을 전기로 바꾸는 장치로 가장 효율이 우수한 장치인 AMTEC은 알칼리금속을 작동유체로 하여 열을 직접적으로 전기로 변환시키는 장치이다. AMTEC은 저압용기, 고압용기, 베타 알루미나 고체 전해질, 그리고 순환윅으로 이루어져있다. AMTEC에서의 열손실은 주요하게 저압용기에서의 BASE와 응축부 사이에서 발생하는 열복사손실이며, 암텍의 발전량은 BASE의 온도유지력에 영향을 받기에 BASE의 표면온도를 고온으로 유지시켜주어야 고효율 발전량은 일정하게 유지할 수 있다. 이를 위하여 저압챔버에서의 복사 열손실을 줄이고 BASE온도는 상승시키고, AMTEC 시스템의 발전량 향상을 위하여 저압용기 내부의 6가지 형태의 열복사차단막에 따른 출력을 전산유체해석을 통하여 분석하였다. 분석에서 최적의 열복사차단막 형상은 수직부에 곡률을 가질 때이며, 그 때의 온도에 대한 무차원수(응축부온도/BASE온도 비)는 0.665 정도이고 출력은 약 17.69 W 정도로 다른 형상에 대비하여 높은 발전량을 갖는 것으로 계산되었다. 높이에 따른 발전량의 차이에서는 수평차단막이 BASE 상부로부터 멀리 떨어진 경우 발전량이 가장 우수하며, 17.58W 정도로 나타났다. 여러 개의 작은 홀과 다중 수평차단막을 설계한 경우는 기준이 되는 형상보다 오히려 발전량이 감소하였으며, 각각 0.91W, 2.06W 정도 감소하였다.

• 대한간호학회지
• /
• 제37권7호
• /
• pp.1061-1072
• /
• 2007

Purpose: The purpose of this study was to compare the effects of intravenous fluid warming and skin surface warming on peri-operative body temperature and acid base balance of abdominal surgical patients under general anesthesia. Method: Data collection was performed from January 4th, to May 31, 2004. The intravenous fluid warming(IFW) group(30 elderly patients) was warmed through an IV line by an Animec set to $37^{\circ}C$. The skin surface warming(SSW) group(30 elderly patients) was warmed by a circulating-water blanket set to $38^{\circ}C$ under the back and a 60W heating lamp 40 cm above the chest. The warming continued from induction of general anesthesia to two hours after completion of surgery. Collected data was analyzed using Repeated Measures ANOVA, and Bonferroni methods. Results: SSW was more effective than IFW in preventing hypothermia(p= .043), preventing a decrease of $HCO_3{^-}$(p= .000) and preventing base excess(p= .000) respectively. However, there was no difference in pH between the SSW and IFW(p= .401) groups. Conclusion: We conclude that skin surface warming is more effective in preventing hypothermia, and $HCO_3{^-}$ and base excess during general anesthesia, and returning to normal body temperature after surgery than intravenous fluid warming; however, skin surface warming wasn't able to sustain a normal body temperature in elderly patients undergoing abdominal surgery under general anesthesia.

• 한국추진공학회지
• /
• 제9권3호
• /
• pp.85-91
• /
• 2005

로켓노즐로부터 방사되는 플룸에 의한 로켓 저부면의 복사 가열을 수치해석적으로 조사하였다. 로켓노즐 주위의 유동 및 온도장의 계산이 선행되었으며, 그에 따라 실제적인 플룸의 형태와 플룸내부의 온도분포를 얻었다. 계산된 온도장을 토대로, 복사 열전달 방정식을 구분종좌법을 이용하여 풀이하였다. 견본 로켓 플룸에 대해 계산한 결과, 저부면에 도달하는 평균복사열은 비행고도 10.9 km에서 약 5kw/m$^{2}$ 이었다. 이 수치는, 플룸의 공간적인 온도분포를 고려하지 않고 일정온도 (1500 K) 가정하에 계산된 복사량에 비하여 작은 값이지만, 그 절대적인 크기를 무시할 수 있을 정도로 작은 값은 아니다. 고고도(29.8 km)에서는 플룸의 팽창 때문에 저부면과 배기 플룸 사이의 보기계수가 증가하게 된다. 그러나, 대류 열전달에 의해 저부면이 1000 K이상으로 가열되기 때문에 복사가열 현상은 사라지게됨을 알았다.

• Journal of Welding and Joining
• /
• 제18권4호
• /
• pp.96-103
• /
• 2000

This study investigated the effects of bonding temperature and bonding atmosphere on high temperature mechanical properties of transient liquid phase(TLP) bonded joints of heat resistant alloy using MBF-50 insert metal. Specimens were bonded at 1,423~1,468K for 600s. Microconstituents of {TEX}$Cr_{7}(C,B)_{3}${/TEX}were formed in the bonded region when the bonding temperature was low. The amount of microcostituents in the bonded layer decreased with increasing the bonding temperature, and the microconstituents in the bonded layer disappeared at the bonding temperature above 1,468K. The tensile strength of the joints at elevated temperatures increased with the increase the bonding temperature and was the same level as one of the base metal in the bonding temperature over 1,453K. Microstructure and alloying element distributions of the bonded region bonded in Ar and $N_2$atmosphere were similar to those of the bonded in vacuum. The creep rupture strength and rupture lives of joints were almost identical to those of base metal.

• 한국항공운항학회지
• /
• 제21권1호
• /
• pp.68-73
• /
• 2013

This study is to make a protype of forecast guidance for forecasters from analyzing the characteristics of Korea Fog. The trend of Korea fog showed the decline in the number of foggy days and the duration time, the gradient is -1.24days/year under 3 miles and -0.98days/year under 1 mile and -1.64hours/year under 3 miles and -3.18hours/year under 1 mile in duration time in 27 ROKAF base. To find the protype of inland and coastal forecast guidance, Daegu base as a representation of the inland base and Gangneung base as the representation of the coastal base were chosen. For Daegu base, the mixture of relative humidity, sky condition, and the position of high pressure were selected for the forecast guidance. For Gangneung base, pressure pattern, sea surface temperature, sea currents, and 850hPa temperature patterns were selected for the forecast guidance.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.411-413
• /
• 2012

본 연구에서는 핀 하중 시험을 통해 열습환경이 탄소섬유/에폭시 복합재료에 미치는 영향을 조사하고 음향방출법을 적용하여 핀 체결부의 파손거동을 분석하였다. 열습환경이 적용된 핀 체결부 시편은 base (침수전), RT (상온침수), HT ($75^{\circ}C$침수)의 세 가지의 조건으로 구분하였다. 결과에 의하면 RT의 경우 base에 비해 베어링강도의 저하정도가 적지만 수분과 온도가 동시에 적용된 열습환경에 노출된 HT의 경우 베어링강도의 저하정도가 크게 나타났다. 또한 음향방출법을 적용하여 누적히트수를 분석한 결과에 따르면 열습을 고려한 경우가 base에 비해 모재균열에 의한 이벤트가 감소하는 경향이 나타났다.