• Journal of Korea Multimedia Society
• /
• v.15 no.12
• /
• pp.1456-1463
• /
• 2012

In this paper, we study the ON/OFF control policy of base stations in two-tier heterogeneous cellular networks to minimize the total power consumption of the system. Using heterogeneous cellular networks is a potential approach of providing higher throughput and coverage compared to conventional networks with only macrocell deployment, but in fact heterogeneous cellular networks often operates regardless of total power consumption, which is a very important issue of modern cellular networks. We propose a policy that controls the activation/deactivation of base stations in heterogeneous cellular networks to minimize total power consumption. Under this policy, the total power consumed can be significantly reduced when the traffic is low while the QoS requirement is satisfied.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.781-787
• /
• 2004

In this paper, a novel dual and wide band aperture stacked patch antenna for Cellular/PCS/IMT-2000 base station is presented. It consists of single microstrip patch having notches along the radiating patch, two dielectric substrates and a form material. To achieve wide band characteristic, we utilize the coupling effect between the notched patch and the resonant aperture in the ground plane and by properly cutting notches on the patch, an aperture stacked patch antenna could be designed to yield dual frequency operation. By the proper choice of resonant aperture size and height of a foam material, dual and wide band characteristic could be realized the measured impedance bandwidth(1:1.5 VSWR) of designed antenna at lower band(860 MHz) reaches 77 MHz and covers the Cellular CDMA band(824∼894 MHz). The measured impedance bandwidth(1:1.5 VSMR) of the designed antenna at upper band(1,960 MHz) is about 550 MHz and covers both the PCS band(1,750∼l,870 MHz) and the for-2000 band(1,920∼2,170 MHz). Good broadside radiation with high gain(5.65∼7.4 dBi) characteristics have also been observed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1262-1270
• /
• 2007

In this paper, we propose a new distortion cancellation mechanism for a balanced power amplifier structure using the carrier cancellation loop of a feedforward and post-distortion technique. The proposed cross post-distortion balanced linear amplifier can reduce nonlinear components as much as the conventional feedforward amplifier through the output dynamic range and broad bandwidth. Also the proposed system provides higher efficiency than the feedforward. The capacities of power amplifier and error power amplifier in the proposed system are analyzed and compared with those of feedforward amplifier. Also the operation mechanisms of the three kind loops are explained. The proposed cross post-distortion balanced linear power amplifier is implemented at the IMT-2000($f_0=2.14\;GHz$) band. With the commercial high power amplifiers of total power of 240 W peak envelope power fer base-station application, the adjacent channel leakage ratio measurement with wideband code division multiple access 4FA signal shows 18.6 dB improvement at an average output power of 40 dBm. The efficiency of fabricated amplifier Improves about 2 % than the conventional feedforward amplifier.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.849-854
• /
• 2018

Radio base stations, which are widely distributed across large areas, have many difficulties in managing them. Unmanned radio base stations in remote mountains are having a hard time accessing them in case of emergencies. Major telephone service providers only remotely control incoming and outgoing information and local small business partners responsible for maintaining actual facilities do not possess such technologies, so they are each checked during field visits. In this study, in order to process the sensor raw data and smoothing, we apply the particle filters and confirmed that the performance of sensor data accuracy is increased. Integrated system using temperature, humidity, fire condition, and power operation at a wide range of radio base stations under the real-time monitoring status is operated well. It show that all of the status of base station are monitored at the remote office using the cloud server through internet networking.

• Journal of Communications and Networks
• /
• v.12 no.5
• /
• pp.449-458
• /
• 2010

In this paper, we present a distributed resource allocation algorithm for multi-cell uplink systems that increases the weighted sum of the average data rates over the entire network under the average transmit power constraint of each mobile station. For the distributed operation, we arrange each base station (BS) to allocate the resource such that its own utility gets maximized in a noncooperative way. We define the utility such that it incorporates both the weighted sum of the average rates in each cell and the induced interference to other cells, which helps to instigate implicit cooperation among the cells. Since the data rates of different cells are coupled through inter-cell interferences, the resource allocation taken by each BS evolves over iterations. We establish that the resource allocation converges to a unique fixed point under reasonable assumptions. We demonstrate through computer simulations that the proposed algorithm can improve the weighted sum of the average rates substantially without requiring any coordination among the base stations.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.1
• /
• pp.1-13
• /
• 1998

The next generation of wireless network will be problably developed as a mobile communications which will support ATM-based multiMedium traffic. We need to develop an dffective MAC protocol in order to support multimedia traffic having variety of QoS characteristics on wireless neteworks. In this paper, we propose a MAC protocol a MAC protocol where mobile terminals having cells to transmit, request slots to base station through requested slot then the base station analyze parameters from mobile and allocate slots to mobile according to priority. The multimedia slot allocation(MSA) protocol divides multimedias applications into real-time/ variant and non real-time services. Entire slots of the frameare partitioned proportionallyby sizeof bandwidth according to types of services, so that related services can use allocated-slots in priority. The proposed algorithm guarantees real time operation since real-time service share slots allocated for non real-real services. The algorithm whih divides slots of the frame is called as an Algorithm A, otherwise as an Algorithm B. The simulation compares by average delay time and cell loss probability between Algorithm and Algorithm B by increasing number of mobile terminal using the proposed MAC protocol. the simulation result for real-time services shows that average delay time and cell loss probability of Algorithm A is better than those of Algorithm B.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.253-259
• /
• 2010

Wireless mesh network is flexible network like Ad hoc network or bluetooth together based on base station. But, wireless mesh network shows high packet loss and when TCP was created, however as it was design based on wired link, wireless link made more transmission error than wired link. It is existent problem of TCP congestion control algorithm that TCP unfairness and congestion collapse over wireless mesh network. When TCP operation occurs with the packet loss where is not the congestion loss, it brings the performance degradation which is serious. In this paper, in order to improve efficient TCP congestion control algorithm in wireless mesh network, we proposed that TCP can adaptively regulate the congestion window in wireless link.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.3
• /
• pp.285-297
• /
• 2016

In this paper, a centralized mmWave-based multi-spot beam cellular system architecture having such a base station equipped with a plurality of beam-forming antennas, multi-layered dynamic cell configuration method as one of key concepts of this system operation and a mobility management method based on it are introduced. To estimate the performance of new system, system simulation was performed under the ideal environment without blockage. These results show the possibility that system capacity can be dramatically increased and mobility performance similar to the existing cellular system may be achieved.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.6 no.4
• /
• pp.3-38
• /
• 1996

The mobile station shall convolutionally encode the data transmitted on the reverse traffic channel and the access channel prior to interleaving. Code symbols output from the convolutional encoder are repeated before being interleaved except the 9600 bps data rate. All the symbols are then interleaved, 64-ary orthogonal modulation, direct-sequence spreading, quadrature spreading, baseband filtering and QPSK transmission. The sync, paging, and forward traffic channel except the pilot channel in the forward CDMA channel are convolutionally encoded, block interleaved, spread with Walsh function at a fixed chip rate of 1.2288 Mcps to provide orthogonal channelization among all code channels. Following the spreading operation, the I and Q impulses are applied to respective baseband filters. After that, these impulses shall be transmitted by QPSK. Authentication in the CDMA system is the process for confirming the identity of the mobile station by exchanging information between a mobile station and the base station. The authentication scheme is to generate a 18-bit hash code from the 152-bit message length appended with 24-bit or 40-bit padding. Several techniques are proposed for the authentication data computation in this paper. To protect sensitive subscriber information, it shall be required enciphering ceratin fields of selected traffic channel signaling messages. The message encryption can be accomplished in two ways, i.e., external encryption and internal encryption.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.91-98
• /
• 2022

Unmanned aircraft system traffic management (UTM) service for the safe operation of unmanned aerial vehicles (UAV) such as drones using commercial communication networks such as long-term evolution (LTE) and 5G in low-altitude areas of 150m or less is being studied in several countries. In this paper, whether it is possible to secure three-dimensional (3D) coverage for UTM service using the existing LTE cellular network for terrestrial usersis analyzed through simulations. The practicality in the real environment is confirmed by performing performance analysis in the actual topographical environment and the LTE base station layouts in Korea. According to the analysis results, as the altitude increases, the number of line-of-sight (LOS) interference base stations increases, resulting in a worse signal to interference plus noise ratio (SINR), but coverage is secured except for the limited areas within 150m. was confirmed to be possible. In addition, it is confirmed that a significant proportion of outage areas could be reduced by placing a small number of additional base stations for the outage area.