• 한국항행학회논문지
• /
• 제6권3호
• /
• pp.195-202
• /
• 2002

최근 이동통신 서비스가 확대됨에 따라 인접 기지국간의 간섭문제가 증가하게 되었으며, 그에 따라 CDMA 시스템의 active IMD뿐만 아니라 PIMD(Passive Inter-Modulation Distortion)에 대한 문제도 시스템 설계 시 고려되어야 한다. 본 논문에서는 RF connector 중 대표적 connector인 7/16" DIN connector를 통하여 동축선에서의 PIMD 발생원인 분석을 위한 다양한 표면조도 및 도금두께, 도금재질을 갖는 어댑터를 설계, 제작하여 PIMD 발생 정도를 분석하였고, PIMD 개선 방안을 제안하였다. 첫째, 대부분의 전류가 통과하는 경로에는 표면조도가 좋은 금속이 전도율이 좋아 유리하며, 둘째, RF 에너지가 충분히 한 매질에서 통과할 수 있도록 최소 $5{\mu}m$ 이상으로 도금을 해야 함을 알 수 있었다. 셋째, 도금 재료의 노화현상 방지를 위해 비열이 높고 전도율이 높은 금속 선택이 필수적이며, 비용절감 면에서는 삼원합금 등 대체 도금 재질 개발이 요구됨을 알 수 있었다. 현재 국내 PIMD 규격인 KTF-150dBc를 만족시키기 위해서는 7/16" DIN connector의 경우 도금재질에 관계없이 표면조도 6S, 도금두께 $5{\mu}m$일 때 KTF의 PIMD 규격을 만족시킬 수 있음을 알 수 있었다.

• 소성∙가공
• /
• 제27권5호
• /
• pp.289-295
• /
• 2018

The profile ring rolling process can realize various ring shapes unlike conventional rectangular cross-sectional ring products. In this paper, the defective groove in the bottom surface of L-shaped ring products was analyzed. Grooves are generated by non-uniform external forces due to profile main roll and initial blank shape. Process parameters such as the motion of dies and working temperature were determined. Mechanism of groove formation was analyzed by FE simulation on the basis of local external forces acting on the blank. Analysis results were similar to the groove actually occurring in the production line. Based on results of the analysis, two solutions were proposed for the groove. The position of the base plate supporting the blank was adjusted and edge length of the main roll was extended to suppress growth of grooves. It has been verified that groove was improved by applying two proposed methods in the shop-floor.

• 한국주거학회논문집
• /
• 제24권6호
• /
• pp.133-140
• /
• 2013

This study is to clarify the form of window and door of medieval times house which are no longer in existence, by comparative analysis between literature materials and architectural remains of united Silla and Goryo period. Particularly the window and door form change process of was analyzed, in connection with the change of term which are recorded in literature material. The form and the composition of window and door are the elements which determine the elevation design of architecture and concerned with interior environment. Therefore this study is significant in the sense that it could be used as base data for the study on the reconstruction and interior space of medieval times house. There were ho (戶) and moon (門) as door, and chang (窓) for lighting and ventilation as window. Among these, the window can be divided into fixed and openable. There were two kind of fixed window. One is called chang (窓), and it was covered by silk or paper for lighting. The other is called ham (檻), it was the form of vertical bar window and lighting and ventilation was available. And there were two kind of openable window. One is called ho (戶), which had wooden plate window leaves. And the other is called changho (窓戶), lighting was available in the condition of closing.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권2호
• /
• pp.55-60
• /
• 2000

A comparison of Riveted and bonded repairs, bearing and net tension failures, and Al 6061-T6 plates is presented. The results are then compared with previous papers about bonded repairs on different patch materials and shapes. Aluminum alloys, including Al 6061-T6, have a face-centered-cubic crystal structure. Under normal circumstances, these types of crystal structures do not exhibit cleavage fractures even at very low temperatures. In aluminum-base structures, the cracked plate structures are frequently repaired using mechanical fasteners-either rivets of bolts- even though patch-bonding techniques are applied to repair and reinforce the structure. Static test results indicate that the riveted repairs are affected by the position of the rivers. When using the same size of patch, the bonded repair technique is stronger; the rate of elongation is also increased. Form FEM analysis, it is revealed the origin of patch debonding in patch-bonded structures is the edge of the patch along to the tensile strength.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.247-250
• /
• 2009

This study considers the feasibility of using the low cost assembled separator. The graphite plate has been widely used as the separator in the field of PEMFCs(Polymer electrolyte membrane fuel cell) industry because of its excellent material properties such as good corrosion resistance, good electrical conductance and so on. However, there are some problems for the commercialization due to its poor cost effectiveness for the large volume manufacturing and lack of mechanical strength. From this respect, this study has focused on the manufacturing technology in order to reduce the price for the commercialization of separator. This study also shows that the assembled separator of the suggested structure, which is composed of grafoil and PC(PolyCarbonate) materials, could be manufactured at low cost enough for the mass production. The flow fields produced by cutting foils and the base plates of the separators were simply made by mechanical work.

• Nuclear Engineering and Technology
• /
• 제44권5호
• /
• pp.543-550
• /
• 2012

The decrease in the fracture toughness of ferritic steels in a reactor pressure vessel is an important factor in determining the lifetime of a nuclear power plant. A surveillance program has been in place in Korea since 1979 to assess the structural integrity of RPV steels. In this work, the surveillance data were collected and analyzed statistically in order to derive the empirical relationship between the embrittlement and strengthening of irradiated reactor pressure vessel steels. There was a linear relationship between the yield strength change and the transition temperature shift change at 41 J due to irradiation. The proportional coefficient was about $0.5^{\circ}C$/MPa in the base metals (plate/forgings). The upper shelf energy decrease ratio was non-linearly proportional to the yield strength change, and most of the data lay along the trend curve of the US results. The transition regime temperature interval, ${\Delta}T_T$, was less than the US data. The overall change from irradiation was very similar to the US results. It is expected that the results of this study will be applied to basic research on the multiscale modeling of the irradiation embrittlement of RPV materials in Korea.

• Korea-Australia Rheology Journal
• /
• 제15권2호
• /
• pp.55-61
• /
• 2003

The steady shear flow properties of vaseline generally used as a base of the pharmaceutical dosage forms were studied in the consideration of wall slip phenomenon. The purpose of this study was to show that how slip may affect the experimental steady-state flow curves of semisolid ointment bases and to discuss the ways to eliminate (or minimize) wall slip effect in a rotational rheometer. Using both a strain-controlled ARES rheometer and a stress-controlled AR1000 rheometer, the steady shear flow behavior was investigated with various experimental conditions ; the surface roughness, sample preparation, plate diameter, gap size, shearing time, and loading methods were varied. A stress-controlled rheometer was suitable for investigating the flow behavior of semisolid ointment bases which show severe wall slip effects. In the conditions of parallel plates attached with sand paper, treated sample, smaller diameter fixture, larger gap size, shorter shearing time, and normal force control loading method, the wall slip effects could be minimized. A critical shear stress for the onset of slip was extended to above 10,000 dyne/$\textrm{cm}^2$. The wall slip effects could not be perfectly eliminated by any experimental conditions. However, the slip was delayed to higher value of shear stress by selecting proper fixture properties and experimental conditions.

• 해양환경안전학회지
• /
• 제20권3호
• /
• pp.304-311
• /
• 2014

In this study, to apply hydrogen energy to ship engine and to generate effective hydrogen production, we investigated the effects of high temperature $H_2SO_4$ feed rate and cooling water rate to pump parts with fixed frequency needed to reciprocate motion and a simulation was conducted at each condition. In the fixed frequency and cooling water inlet flow rate of 0.5 Hz and 3.9 kg/s, we changed the high temperature $H_2SO_4$ flow rate to 47.46 kg/s (it is 105 % of 45.2 kg/s), 49.72 kg/s (110 %), and 51.98 kg/s (115 %). Also, at 0.5 Hz and 45.2 kg/s of frequency and high temperature $H_2SO_4$ flow, the thermal hydraulic analysis was performed at the condition of 95 % (3.705 kg/s), 90 % (3.51 kg/s), and 85 % (3.315 kg/s). In overall simulation cases, the physical properties of materials are more influential to the temperature increase in the pump part rather than the changes on the feed rate of high temperature $H_2SO_4$ and cooling water. A continuous operation of pump was also capable even if the excess feed of high temperature $H_2SO_4$ of about 15 % or the less feed of cooling water of about 15 % were performed, respectively. When the increasing feed of high temperature $H_2SO_4$ of up to 5 %, 10 %, and 15 % were compared with base flow (45.2 kg/s), the deviation of time period rose to a certain temperature and ranged from 0 to 4.5 s in the same position (same material). In case of cooling water, the deviation of time period rose to a certain temperature and ranged from 0 to 5.9 s according to the decreasing feed changes of cooling water at 5 %, 10 %, and 15 % compared to a base flow (3.9 kg/s). Finally, the additional researches related to the two different materials (Teflon and STS for Pitch and End-plate), which are concerned about the effects of temperature changes to the parts contacting different materials, are needed, and we have a plan to conduct a follow-up study.

• 구강회복응용과학지
• /
• 제37권3호
• /
• pp.123-129
• /
• 2021

목적: 본 연구의 목적은 효모형 또는 균사형 Candida albicans에 대한 표고버섯 추출물의항진균효과를 살펴보기 위함이다. 연구 재료 및 방법: 표고버섯 추출물은 표고버섯을 물 또는 에탄올에 닮근 후, 상층액을 건조시켜서 얻었다. 효모형 C. albicans에 대한 추출물의 항진균활성은 마이크로플레이트를 이용한 감수성 시험을 이용하여 조사되었다. C. albicans 생물막을 CO₂ 배양기에서 Ham's F-12 배지를 이용하여 12-well 플레이트에 형성시키고 에탄올 추출물로 처리하였다. 또한 C. albicans 생물막을 의치상용 레진 디스크에 형성시키고 의치세정제를 에탄올 추출물이 포함 또는 포함되지 않은 조건에서 처리하였다. 두 조건의 항바이오필름 효과 시험에서의 바이오필름내 살아있는 C. albicans를 조사하기 위해서 한천고체배지에 접종한 후 집락 형성 단위(CFU) 값을 측정하였다. 결과: 효모형 C. albicans에 대해서 표고버섯으로부터 물 추출물보다 에탄올 추출물이 강한 항진균력을 보였다. 에탄올 추출물은 균사형 C. albicans 바이오필름에 대해서도 유의적인 항진균력을 보였다(P < 0.05). 또한 에탄올 추출물은 의치세정제와 의치에 형성된 C. albicans 바이오필름에 대한 항진균력에 대해서 동반상승효과를 보였다(P < 0.05). 결론: 표고버섯 에탄올 추출물은 구강 칸디다증 예방뿐만 아니라 의치관련 구내염에 대해서 예방할 수 있는 후보물질로 사료된다.

• Tribology and Lubricants
• /
• 제24권4호
• /
• pp.190-195
• /
• 2008

Many researchers have tried to improve the tribological characteristics of lubricant by adding various nano particles in the base lubricant. But the reliability evaluation of the lubricants are rarely performed in its real operation condition. In this study, the physical property and the tribological characteristics of the graphite nano lubricant were evaluated and compared with raw lubricant after thermal degrading. In order to evaluate the tirbological characteristics, the disk-on-disk tribotester was adopted to measure the friction coefficient of the graphite nano lubricants. Also the temperature variations of friction surfaces were measured by the thermocouple installed on the fixed plate in the test chamber of the tribotester. The kinematic viscosity was measured using a capillary viscometer on the temperatures of 40, 60 and $80^{\circ}C$. The results showed that the graphite nano lubricant had lower friction coefficient and less wear on the friction surfaces than raw lubricant. After thermally degrading, the friction coefficients of graphite nano lubricant increased, but the friction coefficients after thermal degradation were still maintained lower than those of raw lubricant.