• 한국지반공학회논문집
• /
• 제32권9호
• /
• pp.5-16
• /
• 2016

풍화암에 근입된 매입말뚝의 선단지지력을 증대시키기 위해 파일 선단에 짧은 길이의 강관을 부착한 새로운 PHC파일이 개발되었다. 본 연구에서는 새로운 PHC파일로 시공된 매입말뚝의 선단지지력 특성을 정량적으로 파악하기 위하여 지반조건이 다른 7개 현장에 새로 개발된 매입말뚝을 시공하고 정재하 및 동재하시험을 수행하였다. 그리고 정재하 시험에서 얻어진 결과에 근거해서 새로운 PHC파일로 시공된 매입말뚝의 선단지지력을 산정하기 위한 경험식을 제안하였다. 현장에서 측정된 선단지지력과 지지력 산정식으로부터 계산된 선단지지력을 비교한 결과 기존 지지력 산정식은 새로운 PHC파일로 시공된 매입말뚝의 선단지지력을 상당히 과소평가하는 반면 제안된 경험식은 새로운 PHC파일로 시공된 매입말뚝의 선단지지력을 안전측에서 산정하는 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.85-90
• /
• 2004

We divided the planting bale into waterproof layer, drainage layer and soil layer so at to investigate changes of live load according to species of wood and composition of the base to make rooftops green. The results are follows, 1. As concerning construction and live load for green roof, sheet waterproofing is superior. 2. When materials of drainage are changed crushed gravel into artificial lightweight graval or ferrite, live load of planting bale is decreased about 22% and 25% in order. 3. When ingredients of soil are chased normal sand into volcanic sand, live load of base is decreased about 28%. Especially, when it is changed into ferrite, 54% of live load is decreased. 4. In this study, all live load we concerned excesses the standard about roof live load of office, school and house. Hence, structure has to be concerned thoroughly when making rooftops green. But, we judge that various methods for making rooftops green can be applied if we consider roof garden when we plan new buildings.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.409-429
• /
• 2006

In designing rock-socketed drilled shaft, bearing capacity evaluation is very important because the maximum values of base and side resistance are not generally mobilized at the same value of displacement, FHWA and AASHTO code suggest different ultimate bearing capacity formular according to rock type and shaft settlement. In domestic code suggest base resistance and side resistance can be added on condition that after confirming the result of field load test with axial load transfer test. This paper shows that static load test and hi-directional load test result analysis of deep rock-socketed drilled shaft in three different sites. Load-settlement curve, t-z, and q-w curve in rock-socketed part were calculated and compared. t-z curve in weathered and soft rock showed no deflection softening behavior in pretty large strain (about 2-3% of diameter). Ultimate resistance could be the summation of side resistance and base resistance in rock-socketed drilled shaft in domestic sites.

• Wind and Structures
• /
• 제3권4호
• /
• pp.279-289
• /
• 2000

The main purpose of this paper is to demonstrate the necessity of considering wind load combinations even for low-rise buildings. It first discusses the overall quasi-static wind load effects and their combinations to be considered in structural design of low-rise buildings. It was found that the maximum torsional moment closely correlates with the maximum along-wind base shear. It was also found that the instantaneous pressure distribution causing the maximum along-wind base shear was quite similar to that causing the maximum torsional moment, and that this asymmetric pressure pattern simultaneously accompanies considerable across-wind and torsional components. Secondly, the actual wind pressure distributions causing maximum quasi-static internal forces in the structural frames are conditionally sampled and their typical pressure patterns are presented.

• 한국지반공학회논문집
• /
• 제29권8호
• /
• pp.53-63
• /
• 2013

PHC파일을 사용한 매입말뚝은 시공 중에 발생하는 소음과 진동을 최소화할 수 있다는 장점 때문에 많은 경우 도심지에 건설되는 건축구조물의 기초로 사용된다. 그러나 매입말뚝의 시공을 위해 굴착공을 천공하는 과정에서 굴착공 저면에 슬라임이 형성되고 그 하부의 지반은 응력이완으로 인해 조밀도가 느슨해져서 매입말뚝은 원지반의 강도에 비해 선단지지력이 작게 발휘된다는 단점을 갖고 있다. 본 연구에서는 매입말뚝의 선단지지력을 증대시키기 위해 PHC파일의 선단에 길이가 짧고 PHC파일과 직경이 동일한 강관을 부착한 새로운 형태의 PHC파일을 개발하였다. 새로운 PHC파일을 사용한 매입말뚝의 선단지지력 증대 효과를 검증하기 위해 현장 말뚝재하시험을 수행한 결과 새로운 PHC파일은 경타에 의해 파일 선단이 굴착공 저면의 슬라임과 그 하부의 이완된 지지층 영역을 관통해서 강도가 큰 원지반에 관입됨으로써 기존 PHC파일보다 매입말뚝의 선단지지력을 상당히 증대시키는 것으로 나타났다.

• 조명전기설비학회논문지
• /
• 제28권7호
• /
• pp.97-105
• /
• 2014

This article examines the causality relationship among SMP, base-load share, LNG import price, and exchange rate in Korean power market during 2002~2012, using unit root test, cointegration test, and vector error correction model(VECM). The cointegration test shows that 4 variables without unit root have been in the long-run causality. As the results of ECM, SMP is analyzed to have been unilaterally caused from LNG import price and base-load share in the shot-run, while it has been unilaterally caused from LNG import price and exchange rate in the long-run. This article has the following policy implications: the adjustment of exchange rate to reduce he risk of LNG import price and the proper securement of base-load share for the long-run stability of SMP.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.249-258
• /
• 1999

Dynamic load and static load tests are performed on steel pipe piles and concrete piles at five construction sites in highway to compare the difference of load bearing mechanisms. At each site, one steel pile is instrumented with electric strain gages and dynamic tests are performed on the pile during installation. Damages of strain gages due to the installation are checked and static test is performed upon the same pile after two or seven days as well. It shows that load transfer from side friction to base resistance behaves somewhat differently according to the results of load-settlement analysis obtained from PDA and static load test. Initial elastic stage of load settlement curves of two load tests is almost similar. But after the yielding point, dynamic resistance of pile behaves more stiffer than static resistance, thus, dynamic load test result might overestimate the real pile capacity compared with static result. Analysis of gage readings shows that unit skin friction increases exponentially with depth. The skin friction is mobilized at the 1∼2m above the pile tip and contributes to the considerable side resistance. Comparison of side and base resistances between the measured value and the calculated value by Meyerhof's bearing capacity equation using SPT N value shows that the calculated base resistance is higher than the measured. Therefore, contribution of side resistance to total capacity shouldn't be ignored or underestimated. Finally, based upon the overall test results, a construction control procedure is suggested.

• 산업기술연구
• /
• 제19권
• /
• pp.135-145
• /
• 1999

This thesis is to investigate the sliding behavior of cantilever retaining wall by using the commercially available program of FLAC to simulate its behavior numerically. Cantilever retaining walls with flat base, sloped base and base with shear key, uniform surcharges being applied on the surface of backfill, were investigated to figure out appropriate location of shear key beneath the base of wall and, thus, its applicability to field condition was assessed by comparing the analyzed results to each other. On the other hand, previously performed centrifuge model test results (Eum, 1996) were analyzed numerically with FLAC to compare test results with respect to characteristics of load-settlement of surcharges and load-lateral movement of wall. Based on the failure mechanism observed during centrifuge tests, limit equilibrium method of finding the ultimate load inducing the sliding failure of wall was used to compare with values of the ultimate load obtained from conventional method of limit equilibrium method. Therefore, appropriate location of shear key was determined to mobilize the maximum resistance against sliding failure of wall.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전력기술부문
• /
• pp.255-257
• /
• 2007

Korea electricity market consists of two payment systems, capacity and energy. Capacity payments are given to the generators according to its hourly availability considering hourly and seasonal weighting factors. Energy payments are settled at the marginal generation cost based on generator variable cost. In 2007, base load energy market is closed and single capacity payment system is begun to apply in electricity market. In this revised market rule, energy price cap for base load generators is newly introduced. We analyze impact of market rule revision in 2007 on base load generators and suggest improvement scheme to enforce market system in this study.

• 전기의세계
• /
• 제31권5호
• /
• pp.368-374
• /
• 1982

This paper describes a combined algorithm for short-term-load forecating. One of the specific features of this algorithm is that the base, weather sensitive and residual components are predicted respectively. The base load is represented by the exponential smoothing approach and residual load is represented by the Box-Jenkins methodology. The weather sensitive load models are developed according to the information of temperature and discomfort index. This method was applied to Korea Electric Company and results for test periods up to three years are given.