• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.63.2-63.2
• /
• 2011

결정질 실리콘 웨이퍼를 이용한 고효율 태양전지를 제작하기 위해서는 반드시 고려해야 할 주요 인자들이 있다. 그 중에서도 Base resistivity, Thickness, Doping concentration, Texture size, Texture angle등의 주요 인자를 PC1D 시뮬레이션 프로그램을 이용하여 최적화 해 보았다. 그 결과, Base resistivity값은 낮을수록 좋으나 지나치게 낮을 경우 재결합으로 인해 효율이 떨어지기 때문에 Base resistivity = $1{\Omega}{\cdot}cm$에서 최대 효율을 얻을 수 있었다. 또한, Thickness는 두꺼울수록 R=${\rho}$(L/A)의 식에 의해 직렬저항이 증가하여 효율이 감소하므로 Thickness = $200{\mu}m$ 정도가 적정 값임을 확인할 수 있었다. Doping concentration의 경우 높을수록 재결합으로 인해 효율이 떨어지며 Doping concentration = $3.69{\times}10^{-20}cm^{-3}$에서 가장 좋은 효율을 보였다. Textrure size와 Textrure angle은 그 값이 클수록 빛의 흡수 정도가 증가해 효율이 증가함을 볼 수 있었고 Textrure size = $2{\sim}4{\mu}m$, Texture angle = $79^{\circ}$에서 높은 효율을 보여주었다. 이와 같은 조건에서 고효율 태양전지를 제작을 위한 시뮬레이션을 한 결과, 16.23%의 변환효율을 얻을 수 있었다.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.807-810
• /
• 2003

This research uses high-resolution satellite images as a source of collecting farmland information. For effectively extract the paddy area, we use texture information and different classify methods to assist the satellite image classification. First, using maximum likelihood classifier to extract paddy information from images. The results show that User Accuracy and Procedure Accuracy of the paddy area can increase from 80.60% to 95.45% and 84.38% to 95.45%. Second, establishing a paddy Knowledge Base and using Knowledge Base Classifier to extract paddy area, and result shows the User Accuracy and Producer Accuracy to be 92.16% and 90.06%. Finally, The result shows we can effectively contribute to the paddy field information extraction from high-resolution satellite images.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.136-137
• /
• 2008

Solar cell's efficiency depends on silicon's characteristic itself, or additional process such as texturing, coating, etc. Using PC1D, by adjusting Texturing, Base Resistivity, Emitter Doping, simulate many situation and observe the result. When texture Angle=$80^{\circ}$, Texture Depth=2um, Base Resistivity = 0.2, Emitter Doping = 8*Exp(19) are set, the solar cell's efficiency si 19.89%, and optimized.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1887-1892
• /
• 2021

The effect of gadolinium and boron on the texture development and magnetic properties of the texture controlled 23Cr-10NiCu duplex stainless steels were studied to develop a high performance neutron and electromagnetic shielding material. The 23Cr-10NiCu base alloy is composed of 60% of austenite and 40% of ferrite, whereas, the 23Cr-10NiCu-0.5Gd-0.8B modified alloy is composed of 66% of austenite, 27% of ferrite and 7% of CrFeB intermetallic compounds. The gadolinium and boron addition to the 23Cr-10NiCu base alloy increased mechanical properties. Microstructure observation showed that the small addition of 0.5 wt% gadolinium and 0.8 wt% boron to the alloy retarded to form texture at the same hot rolling conditions, and improved the maximum magnetism, residual magnetism and coercive force about 3%, 122% and 120%, respectively.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06c
• /
• pp.406-407
• /
• 2012

Texture transfer is a NPR technique for expressing various styles according to source (reference) image. By late 2000s, there are many texture transfer researches. But video base researchers are not active. Moreover, they didn't use important feature like directional information which need to express detail characteristics of target. So, we propose a new method to generate texture transfer animation (using video) with directional effect for maintaining temporal coherence and controlling coherence direction of texture. For maintaining temporal coherence, we use optical flow and confidence map to adapt for occlusion/disocclusion boundaries. And we control direction of texture for taking structure of input. For expressing various texture effects according to different regions, we calculate gradient based on directional weight. With these techniques, our algorithm can make animation result that maintain temporal coherence and express directional texture effect. It is reflect the characteristics of source and target image well. And our result can express various texture directions automatically.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.222-225
• /
• 2006

The effect of lubrication on the development of textures and Microstructure was studied by different lubricating condition during hot rolling of AA1050 aluminum alloy. Hot rolling without lubrication led to the evolution of the pronounced through-thickness texture gradients, whereas hot rolling with lubrication gave rise to the formation of uniform rolling texture in the whole thickness layer. The variation of texture and microstructure according to hot rolling condition are investigated by X-ray diffractometer (XRD) and Electron Back-Scattered Diffraction (EBSD). The experimental results were discussed base on the finite element method (FEM) simulation. FEM calculation reveals that a larger friction between roll and sheet causes the deviated strain state from a plane strain leading to the formation of shear textures in the thickness layers close to the surface.

• Korean journal of food and cookery science
• /
• v.19 no.6
• /
• pp.729-736
• /
• 2003

This study was performed to improve the quality and extend the shelf life of Yukwa and Salyeotgangjung, traditional Korean cookies, by using fine hot salt instead of oil as the popping medium. Yukwa and Salyeotgangjung were popped with fine salt, and the size, sensory evaluation, color values and textural properties were then compared with those popped in oil. The results showed that the Yukwa base with salt was popped the most at 140C and the rice was popped at 240C. The Yukwa base in salts was smaller in size and larger in density than in oil but the popped rice in salts had a similar size and a smaller density than that popped in oil. In the sensory test, the Yukwa base and popped rice expanded in the salts were preferred to those popped in oil but there was little difference in only popped rice. In terms of color, there was a difference between those popped in salt and in oil. In terms of texture, only popped rice expanded in the salts was harder than in oil, and the Yukwa popped in oil was more cohesive than in the salts. In brittleness, there were no differences between in salt and in oil.

• Nuclear Engineering and Technology
• /
• v.45 no.4
• /
• pp.505-512
• /
• 2013

Three types of zirconium base alloy were evaluated to study how their work hardening behavior is affected by alloy composition. Repeated-tensile tests (5% elongation at each test) were performed at room temperature at a strain rate of $1.7{\times}10^{-3}s^{-1}$ for the alloys, which were initially controlled for their microstructure and texture. After considering the yield strength and work hardening exponent (n) variations, it was found that the work hardening behavior of the zirconium base alloys was affected more by the Nb content than the Sn content. The facture mode during the repeated tensile test was followed by the slip deformation of the zirconium structure from the texture and microstructural analysis.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.4
• /
• pp.33-38
• /
• 2013

Image retrieval is one of the most exciting and fastest growing research fields in the area of multimedia technology. As the amount of digital contents continues to grow users are experiencing increasing difficulty in finding specific images in their image libraries. This paper proposes an efficient image descriptor which uses a local color and texture in the non-overlapped block images. To evaluate the performance of the proposed method, we assessed the retrieval efficiency in terms of ANMRR with common image dataset. The experimental trials revealed that the proposed algorithm exhibited a significant improvement in ANMRR, compared to Dominant Color Descriptor and Edge Histogram Descriptor.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.6
• /
• pp.422-433
• /
• 2015

In this paper, we demonstrate inter-layer prediction tools for scalable video coders. The proposed scalable coder is designed to support not only spatial, quality and temporal scalabilities, but also view scalability. In addition, we propose quad-tree inter-layer prediction tools to improve coding efficiency at enhancement layers. The proposed inter-layer prediction tools generate texture prediction signal with exploiting texture, syntaxes, and residual information from a reference layer. Furthermore, the tools can be used with inter and intra prediction blocks within a large coding unit. The proposed framework guarantees the rate distortion performance for a base layer because it does not have any compulsion such as constraint intra prediction. According to experiments, the framework supports the spatial scalable functionality with about 18.6%, 18.5% and 25.2% overhead bits against to the single layer coding. The proposed inter-layer prediction tool in multi-loop decoding design framework enables to achieve coding gains of 14.0%, 5.1%, and 12.1% in BD-Bitrate at the enhancement layer, compared to a single layer HEVC for all-intra, low-delay, and random access cases, respectively. For the single-loop decoding design, the proposed quad-tree inter-layer prediction can achieve 14.0%, 3.7%, and 9.8% bit saving.