• 제목/요약/키워드: Base Station Control

검색결과 320건 처리시간 0.025초

A Minimum Energy Consuming Mobile Device Relay Scheme for Reliable QoS Support

  • Chung, Jong-Moon;Kim, Chang Hyun;Lee, Daeyoung
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제8권2호
    • /
    • pp.618-633
    • /
    • 2014
  • Relay technology is becoming more important for mobile communications and wireless internet of things (IoT) networking because of the extended access network coverage range and reliable quality of service (QoS) it can provide at low power consumption levels. Existing mobile multihop relay (MMR) technology uses fixed-point stationary relay stations (RSs) and a divided time-frame (or frequency-band) to support the relay operation. This approach has limitations when a local fixed-point stationary RS does not exist. In addition, since the time-frame (or frequency-band) channel resources are pre-divided for the relay operation, there is no way to achieve high channel utilization using intelligent opportunistic techniques. In this paper, a different approach is considered, where the use of mobile/IoT devices as RSs is considered. In applications that use mobile/IoT devices as relay systems, due to the very limited battery energy of a mobile/IoT device and unequal channel conditions to and from the RS, both minimum energy consumption and QoS support must be considered simultaneously in the selection and configuration of RSs. Therefore, in this paper, a mobile RS is selected and configured with the objective of minimizing power consumption while satisfying end-to-end data rate and bit error rate (BER) requirements. For the RS, both downlink (DL) to the destination system (DS) (i.e., IoT device or user equipment (UE)) and uplink (UL) to the base station (BS) need to be adaptively configured (using adaptive modulation and power control) to minimize power consumption while satisfying the end-to-end QoS constraints. This paper proposes a minimum transmission power consuming RS selection and configuration (MPRSC) scheme, where the RS uses cognitive radio (CR) sub-channels when communicating with the DS, and therefore the scheme is named MPRSC-CR. The proposed MPRSC-CR scheme is activated when a DS moves out of the BS's QoS supportive coverage range. In this case, data transmissions between the RS and BS use the assigned primary channel that the DS had been using, and data transmissions between the RS and DS use CR sub-channels. The simulation results demonstrate that the proposed MPRSC-CR scheme extends the coverage range of the BS and minimizes the power consumption of the RS through optimal selection and configuration of a RS.

2 GHz 선형 위상 천이 특성을 갖는 소형 아날로그 위상천이기 (A 2 GHz Compact Analog Phase Shifter with a Linear Phase-Tune Characteristic)

  • 오현석;최재홍;정해창;허윤성;염경환
    • 한국전자파학회논문지
    • /
    • 제22권1호
    • /
    • pp.114-124
    • /
    • 2011
  • 본 논문에서는 2 GHz 선형 위상 천이 특성을 갖는 위상천이기를 설계 및 제작하여 보였다. 소형의 위상 천이기 구현을 위해 집중소자로 구성된 전통과 회로망(all pass network)을 기반으로 위상천이기를 구성하고, 박막세라믹 공정을 이용하여 제작하였다. 또한, 선형의 위상 천이 특성을 얻기 위해 버랙터(varactor) 다이오드에 직렬 커패시터를 연결하여, 전압에 대한 커패시턴스를 선형화함으로써 비선형성을 개선하였다. 전통과 회로망에 나타나는 인덕터는 스파이럴 인덕터로 구현하고, 이를 다이오드 바이어스 회로에 활용하여 $4\;mm{\times}4\;mm$ 면적을 가지는 소형 위상천이기를 구성할 수 있었다. 또한, 온-웨이퍼(on wafer)로 측정을 위해 입출력은 CPW(Coplanar Waveguide) 형상으로 구현하였으며, 제작된 위상천이기는 버랙터 조정 전압 0~5 V에 대하여, 2 GHz에서 삽입 손실은 약 4.2~4.7 dB, 위상 변화량은 약 $79^{\circ}$였으며, 예상한대로 선형 위상 천이 특성을 보였다.

간섭과 Rician 페이딩이 존재하는 저궤도 이동 위성 통신망에서 도플러 효과에 따르는 위상 에러의 검출 (Detection of Phase Error Due to the Doppler Effect in Low Earth Orbit Mobile Satellite Communication Network in the Presence of Interference and Rician Fading)

  • 조훈주;김영철;강희조
    • 한국전자파학회논문지
    • /
    • 제7권1호
    • /
    • pp.71-82
    • /
    • 1996
  • 본 논문에서는 저궤도 이동위성을 이용한 통신에 있어서 위성과 지구국 사이의 상대적 움직임에 의한 도플러 위상에러를 검출하였으며, 잡음과 도플러 위상에러가 존재할 때와 Rician 페이딩 채널환 경에서 잡음, 간섭과 도플러 위상에러가 존재할 때, BPSK 시스템의 성능을 오율측면에서 비교 평가 하였다 유도한 오율식에 의해 수치계산을 행하고, 계산 결과치를 위성의 고도, 궤도의 이심율, 이동 지국의 속도, 지구의 자전속도, Rician 페이딩 파라메타, 신호전력 대 간섭전력 비(SIR) 그리고 반송파 주파수와 기저대역 신호의 비트율 비를 파라메타 항목으로 수치 계산 방식을 이용하여 분석하였다. 본 해석으로 부터 Rician 페이딩 채널환경에서 간섭과 도플러 위상에러가 잡음과 도플러 위상에러 효과보다 위성통신 채널에서 심각한 성능 저하를 유발함을 결론으로 얻을 수 있었다. 또한 수치계산 방법을 이용하여 위성통신 파라메타에 따라서 시스템의 성능을 열화시키는 요소에 대한 영향을 정량적으로 파악할 수 있었다 더우기 향후의 위성통신 시스댐의 설계시 적절한 송선 전력의 제어를 통한 성능 향상음 위한 자료로써 활용될 수 있음을 보였다.

  • PDF

최대 수명을 갖는 AODV 라우팅 프로토콜 실험 설계 (Experimental Design of AODV Routing Protocol with Maximum Life Time)

  • 김용길;문경일
    • 한국인터넷방송통신학회논문지
    • /
    • 제17권3호
    • /
    • pp.29-45
    • /
    • 2017
  • 애드 혹 센서 네트워크는 분산형 구조와 구축으로 특징지어지며 센서 네트워크는 낮은 이동성과 엄격한 에너지 요구 조건 등을 제외하고는 애드 혹 네트워크의 기본적인 특징을 모두 갖추고 있다. 기존 프로토콜은 내결함성, 분산 컴퓨팅, 견고성, 확장성 및 신뢰성과 같은 특성 간에 서로 다른 보완성을 제공한다. 지금까지 제안된 무선 프로토콜은 매우 제한되어있어 일반적으로 단일 기지국 또는 센서 데이터 수집에 중점을 두었다. 그러한 제약을 가지는 주된 이유는 네트워크 활동을 유지하기 위해 최대 수명을 유지하기 때문에 네트워크 수명은 애드 혹 네트워크에서 중요한 설계 기준이며 모든 노드가 라우터 역할을 수행하여 에너지 부족인한 일부 노드가 동작하지 않으면 다른 노드로 통신할 수 없다. 본 논문에서는 네트워크 노드의 에너지 통신을 최적화하기 위한 실험적인 애드 혹 주문형 거리 벡터 라우팅 프로토콜을 제안 한다 부하 분산은 경로 선택 단계에서 소진된 노드의 선택을 피하고 노드 간 에너지 사용의 균형을 유지하고 네트워크 수명을 극대화한다. 전송 제어 단계에서는 신호 전송 범위를 증가시키는 높은 전송 전력의 선택과 홉 수를 줄이고 네트워크 연결 비용의 부담을 줄이는 낮은 전력 수준 사이의 균형이 필요하다.

$0.18-{\mu}m$ CMOS 공정으로 제작된 UHF 대역 수동형 온도 센서 태그 칩 (A UHF-band Passive Temperature Sensor Tag Chip Fabricated in $0.18-{\mu}m$ CMOS Process)

  • 파함 듀이 동;황상현;정진용;이종욱
    • 대한전자공학회논문지SD
    • /
    • 제45권10호
    • /
    • pp.45-52
    • /
    • 2008
  • 본 논문에서는 무선으로 전력과 데이터를 받는 온서 센서 태그 칩을 $0.18-{\mu}m$ CMOS공정으로 제작하였다. 태그 칩 구동에 필요한 전력은 쇼트키 다이오드로 구성된 전압체배기를 이용하여 리더로부터 받는 UHF 대역 (900 MHz) RF 신호를 이용하여 발생시킨다. 태그 칩이 위치한 부분의 온도는 sub-threshold 모드에서 동작하는 새로운 저전력 온도-전압 변환기를 이용하여 측정되고, 이 아날로그 전압은 8-bit 아날로그-디지털 변환기를 통해 디지털 데이터로 표시된다. ASK 복조기와 간단한 디지털 회로로 구성된 회로 블록을 이용해 여러 태그 칩 중에 단일 칩을 선택할 수 있는 식별자 정보를 인식할 수 있다. 제작된 온도 센서는 주변 환경 온도 $20^{\circ}C$ to $100^{\circ}C$ 사이의 온도를 측정한 결과, $0.64^{\circ}C/LSB$의 해상도를 나타내었다. 온도 센서 구동에 필요한 입력 전력은 -11 dBm이었고, 온도 오차는 최대 $0.5^{\circ}C$, 칩 면적은 $1.1{\times}0.34mm^2$, 동작주파수는 100 kHz, 전력소모는 64 ${\mu}W$, 변환율은 12.5 k-samples/sec을 가진다.

고가(高架)구조물의 정위치 시공을 위한 준스태틱RTK 측위의 적용성 실험 (Availability Evaluation of Quasi Static RTK Positioning for Construction of High Rise Buildings and Civil Structures)

  • 김인섭
    • 대한공간정보학회지
    • /
    • 제19권4호
    • /
    • pp.119-126
    • /
    • 2011
  • 초고층 건물이나 고가 구조물 상부의 정위치 측설에 주로 사용되어 왔던 광학식 TS장비는 시준선 확보의 어려움, 장거리 관측에 따른 오차의 증가 및 동적관측의 어려움 등으로 인하여 사용성이 많이 떨어지므로 최근에는 GPS를 이용한 측량방법이 제시되고 있다. 그러나 기존의 GPS측량방법들은 대부분 후처리 방법으로서 측설, 검측, 위치조정 및 확인측량 등 일련의 과정에서 시간이 과다 소요되는 문제점이 있다. 따라서 본 논문에서는 RTK측위 기법을 적용하여 실시간으로 구조물의 위치를 검측하고 조정함으로써 측량으로 인한 공사의 중단을 최소화 하고, 준스태틱 RTK기법에 의한 고정밀의 측정값을 기반으로 망조정을 통해 수 mm 이내의 높은 정확도로 시공좌표를 결정함으로써 공정관리와 품질관리를 모두 충족시킬 수 있는 방법에 대해 실험 하였다. 실험결과 130m 이상 높이의 고가 구조물 상층부에서 사변망을 이루는 4점의 준스태틱 RTK 관측점을 최소제곱법으로 망조정 하면 약 2mm 내외의 정확도로 구조물 측설이 가능하므로 향후 초고층 건물이나 고가 교량등의 시공측량에 널리 적용될 수 있을 것으로 사료된다.

IMT-Advanced 능동위상배열 시스템용 고효율 송수신 모듈 설계 및 구현 (Design and Implementation of High Efficiency Transceiver Module for Active Phased Arrays System of IMT-Advanced)

  • 이석희;장홍주
    • 전자공학회논문지
    • /
    • 제51권7호
    • /
    • pp.26-36
    • /
    • 2014
  • IMT-Advanced 시스템을 효율적으로 서비스하고 시스템 효율을 증대시키기 위해서는 능동위상 배열구조의 안테나 시스템이 요구된다. 능동위상 배열 구조는 다수의 송수신 모듈과 다수의 복사소자로 구성되어 시스템의 효율을 증대시킬 수 있으며, 시스템을 구현하기 위해서는 초소형 고효율 송수신 모듈이 핵심이다. 최종 출력과 밀접한 관련이 있는 송신모듈의 전력증폭기는 기지국 시스템의 효율을 결정하는 핵심요소이다. 본 논문에서는 IMT-Advanced 능동위상배열 시스템에 적합한 초소형 고효율 송수신 모듈을 설계하고 구현하고자 하였다. 송수신 모듈은 온도보상 회로를 구현하여 이득 오차를 줄였으며, 선형화기는 소형화를 위하여 아날로그 방식으로 구현하였다. 초소형 고효율 전력증폭기를 구현하기 위해서 GaN MMIC Doherty 구조로 구현하였다. 구현된 송수신모듈은 $40mm{\times}90mm{\times}50mm$ 크기로 구현되었으며, LTE band 7에서 47.65 dBm의 출력을 가졌다. 실제 운용전력인 37 dBm에서 40.7%의 효율과 12 dB이상의 선형성 개선도를 보였다. 수신부의 잡음지수는 1.28 dB이하로 설계규격을 만족하였으며, 송수신 모듈의 이득과 위상은 6 bit로 제어로 최대 오차는 각각 0.38 dB와 2.77 degree를 보였다.

SANET-CC : 해상 네트워크를 위한 구역 IP 할당 프로토콜 (SANET-CC : Zone IP Allocation Protocol for Offshore Networks)

  • 배경율;조문기
    • 지능정보연구
    • /
    • 제26권4호
    • /
    • pp.87-109
    • /
    • 2020
  • 현재 육상에서는 유무선 통신의 발전으로 다양한 IT 서비스를 제공받고 있다. 이러한 변화는 육상을 넘어서서 해상에서 항해 중인 선박에서도 다양한 IT 서비스가 제공되어야 하며 육상에서 이용하는 것과 마찬가지로 양방향 디지털 데이터 전송, Web, App 등과 같은 다양한 IT 서비스들의 제공에 대한 요구가 증가될 것으로 예상하고 있다. 하지만 이러한 초고속 정보통신망은 AP(Access Point)와 기지국과 같은 고정된 기반 구조를 바탕으로 네트워크를 구성하는 지상에서는 쉽게 사용할 수 있는 반면 해상에서는 고정된 기반 구조를 이용하여 네트워크를 구성할 수 없다. 그래서 전송 거리가 긴 라디오 통신망 기반의 음성 위주의 통신 서비스를 사용하고 있다. 이러한 라디오 통신망은 낮은 전송 속도로 인해 매우 기본적인 정보만을 제공할 수 있었으며, 효율적인 서비스 제공에 어려움이 있다. 이를 해결하기 위해서 디지털 데이터 상호교환을 위한 추가적인 주파수가 할당되었으며 이 주파수를 사용하여 활용할 수 있는 선박 애드 혹 네트워크인 SANET(ship ad-hoc network)이 제안되었다. SANET은 높은 설치비용과 사용료의 위성 통신을 대신하여 해상에서 IP 기반으로 선박에 다양한 IT 서비스를 제공할 수 있도록 개발되었다. SANET에서는 육상 기지국과 선박의 연결성이 중요하다. 이러한 연결성을 갖기 위해서는 선박은 자신의 IP 주소를 할당 받아 네트워크의 구성원이 되어야 한다. 본 논문에서는 선박 스스로 자신의 IP 주소를 할당 받을 수 있는 SANET-CC(Ship Ad-hoc Network-Cell Connection) 프로토콜을 제안한다. SANET-CC는 중복되지 않는 다수의 IP 주소들을 육상기지국에서 선박들에 이어지는 트리 형태로 네트워크 전반에 전파한다. 선박은 IP 주소를 할당할 수 있는 육상 기지국 또는 나누어진 구역의 M-Ship(Mother Ship)들과 간단한 요청(Request) 및 응답(Response) 메시지 교환을 통해 자신의 IP 주소를 할당한다. 따라서 SANET-CC는 IP 충돌 방지(Duplicate Address Detection) 과정과 선박의 이동에 의해 발생하는 네트워크의 분리나 통합에 따른 처리 과정을 완전히 배제할 수 있다. 본 논문에서는 SANET-CC의 SANET 적용가능성을 검증하기 위해서 다양한 조건의 시뮬레이션을 수행하였으며 기존 연구와 비교 분석을 진행하였다.

Field Studios of In-situ Aerobic Cometabolism of Chlorinated Aliphatic Hydrocarbons

  • Semprini, Lewts
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
    • /
    • pp.3-4
    • /
    • 2004
  • Results will be presented from two field studies that evaluated the in-situ treatment of chlorinated aliphatic hydrocarbons (CAHs) using aerobic cometabolism. In the first study, a cometabolic air sparging (CAS) demonstration was conducted at McClellan Air Force Base (AFB), California, to treat chlorinated aliphatic hydrocarbons (CAHs) in groundwater using propane as the cometabolic substrate. A propane-biostimulated zone was sparged with a propane/air mixture and a control zone was sparged with air alone. Propane-utilizers were effectively stimulated in the saturated zone with repeated intermediate sparging of propane and air. Propane delivery, however, was not uniform, with propane mainly observed in down-gradient observation wells. Trichloroethene (TCE), cis-1, 2-dichloroethene (c-DCE), and dissolved oxygen (DO) concentration levels decreased in proportion with propane usage, with c-DCE decreasing more rapidly than TCE. The more rapid removal of c-DCE indicated biotransformation and not just physical removal by stripping. Propane utilization rates and rates of CAH removal slowed after three to four months of repeated propane additions, which coincided with tile depletion of nitrogen (as nitrate). Ammonia was then added to the propane/air mixture as a nitrogen source. After a six-month period between propane additions, rapid propane-utilization was observed. Nitrate was present due to groundwater flow into the treatment zone and/or by the oxidation of tile previously injected ammonia. In the propane-stimulated zone, c-DCE concentrations decreased below tile detection limit (1 $\mu$g/L), and TCE concentrations ranged from less than 5 $\mu$g/L to 30 $\mu$g/L, representing removals of 90 to 97%. In the air sparged control zone, TCE was removed at only two monitoring locations nearest the sparge-well, to concentrations of 15 $\mu$g/L and 60 $\mu$g/L. The responses indicate that stripping as well as biological treatment were responsible for the removal of contaminants in the biostimulated zone, with biostimulation enhancing removals to lower contaminant levels. As part of that study bacterial population shifts that occurred in the groundwater during CAS and air sparging control were evaluated by length heterogeneity polymerase chain reaction (LH-PCR) fragment analysis. The results showed that an organism(5) that had a fragment size of 385 base pairs (385 bp) was positively correlated with propane removal rates. The 385 bp fragment consisted of up to 83% of the total fragments in the analysis when propane removal rates peaked. A 16S rRNA clone library made from the bacteria sampled in propane sparged groundwater included clones of a TM7 division bacterium that had a 385bp LH-PCR fragment; no other bacterial species with this fragment size were detected. Both propane removal rates and the 385bp LH-PCR fragment decreased as nitrate levels in the groundwater decreased. In the second study the potential for bioaugmentation of a butane culture was evaluated in a series of field tests conducted at the Moffett Field Air Station in California. A butane-utilizing mixed culture that was effective in transforming 1, 1-dichloroethene (1, 1-DCE), 1, 1, 1-trichloroethane (1, 1, 1-TCA), and 1, 1-dichloroethane (1, 1-DCA) was added to the saturated zone at the test site. This mixture of contaminants was evaluated since they are often present as together as the result of 1, 1, 1-TCA contamination and the abiotic and biotic transformation of 1, 1, 1-TCA to 1, 1-DCE and 1, 1-DCA. Model simulations were performed prior to the initiation of the field study. The simulations were performed with a transport code that included processes for in-situ cometabolism, including microbial growth and decay, substrate and oxygen utilization, and the cometabolism of dual contaminants (1, 1-DCE and 1, 1, 1-TCA). Based on the results of detailed kinetic studies with the culture, cometabolic transformation kinetics were incorporated that butane mixed-inhibition on 1, 1-DCE and 1, 1, 1-TCA transformation, and competitive inhibition of 1, 1-DCE and 1, 1, 1-TCA on butane utilization. A transformation capacity term was also included in the model formation that results in cell loss due to contaminant transformation. Parameters for the model simulations were determined independently in kinetic studies with the butane-utilizing culture and through batch microcosm tests with groundwater and aquifer solids from the field test zone with the butane-utilizing culture added. In microcosm tests, the model simulated well the repetitive utilization of butane and cometabolism of 1.1, 1-TCA and 1, 1-DCE, as well as the transformation of 1, 1-DCE as it was repeatedly transformed at increased aqueous concentrations. Model simulations were then performed under the transport conditions of the field test to explore the effects of the bioaugmentation dose and the response of the system to tile biostimulation with alternating pulses of dissolved butane and oxygen in the presence of 1, 1-DCE (50 $\mu$g/L) and 1, 1, 1-TCA (250 $\mu$g/L). A uniform aquifer bioaugmentation dose of 0.5 mg/L of cells resulted in complete utilization of the butane 2-meters downgradient of the injection well within 200-hrs of bioaugmentation and butane addition. 1, 1-DCE was much more rapidly transformed than 1, 1, 1-TCA, and efficient 1, 1, 1-TCA removal occurred only after 1, 1-DCE and butane were decreased in concentration. The simulations demonstrated the strong inhibition of both 1, 1-DCE and butane on 1, 1, 1-TCA transformation, and the more rapid 1, 1-DCE transformation kinetics. Results of tile field demonstration indicated that bioaugmentation was successfully implemented; however it was difficult to maintain effective treatment for long periods of time (50 days or more). The demonstration showed that the bioaugmented experimental leg effectively transformed 1, 1-DCE and 1, 1-DCA, and was somewhat effective in transforming 1, 1, 1-TCA. The indigenous experimental leg treated in the same way as the bioaugmented leg was much less effective in treating the contaminant mixture. The best operating performance was achieved in the bioaugmented leg with about over 90%, 80%, 60 % removal for 1, 1-DCE, 1, 1-DCA, and 1, 1, 1-TCA, respectively. Molecular methods were used to track and enumerate the bioaugmented culture in the test zone. Real Time PCR analysis was used to on enumerate the bioaugmented culture. The results show higher numbers of the bioaugmented microorganisms were present in the treatment zone groundwater when the contaminants were being effective transformed. A decrease in these numbers was associated with a reduction in treatment performance. The results of the field tests indicated that although bioaugmentation can be successfully implemented, competition for the growth substrate (butane) by the indigenous microorganisms likely lead to the decrease in long-term performance.

  • PDF

사용자간 동기오차와 증폭기의 비선형 왜곡을 동시에 고려한 두 상향링크 OFDMA 기법의 채널용량 비교 분석 (Capacity Comparison of Two Uplink OFDMA Systems Considering Synchronization Error among Multiple Users and Nonlinear Distortion of Amplifiers)

  • 이진희;김봉석;최권휴
    • 한국통신학회논문지
    • /
    • 제39A권5호
    • /
    • pp.258-270
    • /
    • 2014
  • 본 논문에서는 다중 사용자 간 시간 동기 오차에 강인한 상향링크 OFDMA (Orthogonal Frequency Division Multiple Access) 두 기법, 즉, ZCZ (Zero Correlation Zone) 코드 시간축 확산 OFDMA 기법과 시간동기오차에 강한 SC-FDMA (Single Carrier Frequency Division Mmultiple Access)기법의 채널용량을 비교한다. 보다 현실적인 성능을 비교하기 위해 사용자 간 시간 동기 오차 뿐 아니라 상향링크 OFDMA 신호 생성의 가장 큰 이슈인 PAPR (Peak-to-Average Power Ratio)에 의한 신호의 왜곡효과도 함께 고려한다. 사용자 간 시간 동기 오차에 의한 간섭이 존재하는 환경에서는 전력제어에 의해 증폭된 사용자들의 신호가 다른 사용자들의 신호에 큰 간섭으로 작용할 수 있다. 한편, 거리를 고려하여 증폭된 신호가 단말의 증폭기의 선형 증폭구간을 벗어나게 되면 신호의 왜곡이 발생하여 최종 성능의 저하를 발생시킬 수도 있다. 따라서, 기지국과 사용자 간의 거리만을 고려한 전력제어 방식이 아니라 최대 채널용량 성능을 갖게 하는 사용자 송신 전력 조합을 실험을 통해 찾는다. 즉, 사용자 단말의 전력 제한 수치와 사용자 시간 동기 오차의 최대범위 및 $E_b/N_0$ 등의 다양한 조합들에 대해 최대 채널용량 성능을 갖게 하는 송신전력 보정 계수(ASF: Adaptive Scaling Factor)을 실험을 통해 찾는다. 먼저, 송신전력 보정계수를 적용한 경우 두 상향링크 OFDMA 방식의 채널용량은 단순히 거리만을 고려한 전력제어 방식을 적용한 경우 즉, 송신전력 보정 계수=1인 경우에 비해 얼마나 높은 채널용량 성능을 가지는지 분석한다. 두 상향링크 OFDMA 방식의 채널용량 성능을 비교하면, 송신출력이 상대적으로 낮아도 되는 높은 $E_b/N_0$ 환경에서는 시간 동기 오차에 보다 강인한 특성을 가진 ZCZ 코드 시간축 확산 OFDMA 기법의 채널용량 성능이 좋고, 반대로 상대적으로 높은 송신출력을 요구하는 낮은 $E_b/N_0$ 환경에서는 낮은 PAPR 특성을 갖는 시간동기오차에 강한 SC-FDMA 기법의 채널용량 성능이 보다 우수함을 다양한 실험을 통해 보인다.