• Proceedings of the KSEEG Conference
• /
• 2001.05b
• /
• pp.42-63
• /
• 2001

The detail survey on the Songsanri tomb site including the Muryong royal tomb was carried out during the period from May 1 , 1996 to April 30, 1997. A quantitative analysis was tried to find changes of tomb itself since the excavation. Main subjects of the survey are to find out the cause of infiltration of rain water and groundwater into the tomb and the tomb site, monitoring of the movement of tomb structure and safety, removal method of the algae inside the tomb, and air controlling system to solve high humidity condition and dew inside the tomb. For these purposes, detail survery inside and outside the tombs using a electronic distance meter and small airplane, monitoring of temperature and humidity, geophysical exploration including electrical resistivity, geomagnetic, gravity and georadar methods, drilling, measurement of physical and chemical properties of drill core and measurement of groundwater permeability were conducted. We found that the center of the subsurface tomb and the center of soil mound on ground are different 4.5 meter and 5 meter for the 5th tomb and 7th tomb, respectively. The fact has caused unequal stress on the tomb structure. In the 7th tomb (the Muryong royal tomb), 435 bricks were broken out of 6025 bricks in 1972, but 1072 bricks are broken in 1996. The break rate has been increased about 250% for just 24 years. The break rate increased about 290% in the 6th tomb. The situation in 1996 is the result for just 24 years while the situation in 1972 was the result for about 1450 years. Status of breaking of bircks represents that a severe problem is undergoing. The eastern wall of the Muryong royal tomb is moving toward inside the tomb with the rate of 2.95 mm/myr in rainy season and 1.52 mm/myr in dry season. The frontal wall shows biggest movement in the 7th tomb having a rate of 2.05 mm/myr toward the passage way. The 6th tomb shows biggest movement among the three tombs having the rate of 7.44mm/myr and 3.61mm/myr toward east for the high break rate of bricks in the 6th tomb. Georadar section of the shallow soil layer represents several faults in the top soil layer of the 5th tomb and 7th tomb. Raninwater flew through faults tnto the tomb and nearby ground and high water content in nearby ground resulted in low resistance and high humidity inside tombs. High humidity inside tomb made a good condition for algae living with high temperature and moderate light source. The 6th tomb is most severe situation and the 7th tomb is the second in terms of algae living. Artificial change of the tomb environment since the excavation, infiltration of rain water and groundwater into the tombsite and bad drainage system had resulted in dangerous status for the tomb structure. Main cause for many problems including breaking of bricks, movement of tomb walls and algae living is infiltration of rainwater and groundwater into the tomb site. Therefore, protection of the tomb site from high water content should be carried out at first. Waterproofing method includes a cover system over the tomvsith using geotextile, clay layer and geomembrane and a deep trench which is 2 meter down to the base of the 5th tomb at the north of the tomv site. Decrease and balancing of soil weight above the tomb are also needed for the sfety of tomb structures. For the algae living inside tombs, we recommend to spray K101 which developed in this study on the surface of wall and then, exposure to ultraviolet light sources for 24 hours. Air controlling system should be changed to a constant temperature and humidity system for the 6th tomb and the 7th tomb. It seems to much better to place the system at frontal room and to ciculate cold air inside tombs to solve dew problem. Above mentioned preservation methods are suggested to give least changes to tomb site and to solve the most fundmental problems. Repairing should be planned in order and some special cares are needed for the safety of tombs in reparing work. Finally, a monitoring system measuring tilting of tomb walls, water content, groundwater level, temperature and humidity is required to monitor and to evaluate the repairing work.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.1
• /
• pp.76-82
• /
• 2010

Experiments were conducted to investigate seed persistence of Chinese milk vetch(CMV) in naturally reseeded rice field in 2007~2009. The seed and pods with seeds were buried in rice field at 0, 5 and 10 cm depths and retrieved from the field at one to three month intervals from July to the following year March and determined change of seed dormancy and viability. In the second experiment, persistence of the CMV seeds in the naturally reseeded rice field at different tillage methods and soil depths were also investigated after rice harvest in autumn. Burial depths and durations affected recovery rate, dormancy and viability of CMV seed. The viability loss was faster and greater in the seed than the pod with seeds and on the soil surface than the 5 or 10 cm burial depths. The recovery rate of CMV seed was decreased starting from one month as seed burial and it was significantly decreased to 52~65% for the seed in September. However, unlike the seed burial, the nearly 100% CMV seeds were recovered for burial as pod with seeds even after four months burial in both 0 and 5 cm depths. However, the recovery rate was sharply declined to below 30% at October in 2007 in both seed and pods with seeds and in the 2008/2009 experiment. the 15~47% of CMV seeds still remained even after October. The CMV had high seed dormancy of 95%, showing only 4~5% germination at the beginning in June but the seed germination increased to 25 to 35% in seed and 55 to 61% in pod with seeds in September due to breakage of hard seed dormancy. The viability loss was faster in the seed than in the pod with seeds regardless of depths of placement in the soil base on decayed seeds. Also the seed placed on the soil surface lost viability faster than the 5~10 burial depths. On the other hand, field observation in the naturally reseeded CMV rice field showed that as many as 917~2,185 CMV seeds $m^2$ were from the 0~15 cm soil depth in the rotary tillage and 250~10,105 CMV seeds in minimum tillage treatmints. The recovered seed germinated 25~33%, 23~43% but still had high percentage of hard seed having 64~72% and 51~77% even after rice harvest in autumn. These results indicate that freshly harvested CMV seeds had high level of primary dormancy and the dormancy was gradually broken in soil with time during rice cultivation periods and appreciable number of CMV seeds remained even 4 month after burial in soil. CMV plant regenerated naturally from the remained seed bank at rice harvest time in autumn. The CMV seedling still emerged even after 2 years of continuous destructive killing of emerged CMV plant by rotary tillage in naturally reseeded CMV plant in rice field, indicating that CMV seeds do persistent as least two years in soil.

• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.375-382
• /
• 2012

This research will target the Dental Hygienics students to identify the level and type of the $2{\times}2$ achievement target orientation, and will study how this achievement target orientation is related to the Self-Regulated Learning, as well as the effect on the each sub elements of the Self-Regulated Learning (SRL). Among the $2{\times}2$ achievement target orientation of all the female university students, the skillful approach was found to be highest. In case of the adjustment of the motivation following grade, intrinsic value of the 1st grader was higher than the intrinsic value of the 2nd and 3rd graders. As for the behavior adjustment, the 3rd grader's time and studying adjustment were found to be higher. Mean while, pursuit of the cooperation was found to be high compared to the time and studying adjustment of the1st and 2nd graders. Second, intrinsic value, overt goal orientation, and studying environment adjustment among the SRL's subelements, manifested significant correlation with all the sub elements of the $2{\times}2$ achievement target orientation. As for the elements that affected cognition adjustment, grade and skillful approach were found to exert significant effect on the performance adjustment. As for the element that affects behavior adjustment, grade and skillful approach exerted significant effect on the sub elements of the behavior adjustment. Analysis on the effect of the achievement target orientation and SRL implies that the direction of the students' learning goal can be modified and that they can learn effectively by using the SRL appropriately. When the two elements are factored in carefully, the key findings could serve as a base data that can motivate the students, inducing effective learning process.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.22 no.4
• /
• pp.151-171
• /
• 2017

Most of oceanic current maps in the secondary school science and earth science textbooks have been made on the base of extensive in-situ measurements conducted by Japanese oceanographers during 1930s. According to up-to-date scientific knowledge on the currents in the Yellow Sea and the East China Sea (YES), such maps have significant errors and are likely to cause misconceptions to students, thus new schematic map of ocean currents is needed. The currents in the YES change seasonally due to relatively shallow water depths, complex terrain, winds, and tides. These factors make it difficult to construct a unified ocean current map of the YES. Sixteen major items, such as the flow of the Kuroshio Current into the East China Sea and its northward path, the origin of the Tsushima Warm Current and its path into the Korea Strait, the path of Taiwan Warm Current, the Jeju Warm Current, the runoff pattern of the Yangtze River flow, the routes of the northward Yellow Sea Warm Current, the Chinese Coastal Current, and the West Korea Coastal Current off the west coast of the Korean Peninsula, were selected to produce the schematic current map. Review of previous scientific researches, in-depth discussions through academic conferences, expert discussions, and consultations for three years since 2014 enabled us to produce the final ocean current maps for the YES after many revisions. Considering the complexity of the ocean currents, we made seven ocean current maps: two representative current patterns in summer and winter, seasonal current maps for upper layer and lower layer in summer and winter, and one representative surface current map. It is expected that the representative maps of the YES, connected to the current maps of the East Sea and the Northwest Pacific Ocean, would be widely utilized for diverse purposes in the secondary-school textbooks as well as high-level educational purposes and even for scientific scholarly experts.

• Korean Journal of Environment and Ecology
• /
• v.34 no.1
• /
• pp.85-92
• /
• 2020

The purpose of this study is to provide base information that can be utilized in surveying the status of landscape management within apartment complexes and grasping the conditions of the soil for planting plants, as a way to improve the quality of green spaces by repairing poorly vegetated spaces within apartment complexes and remodeling them with diverse species of plants. Considering that trees and shrubs of equal sizes are simultaneously planted upon the completion of apartment complexes, they were divided based on their completion year at the interval of 5 years and differences in the growth of trees and the components of soil over time were analyzed. Out of the species of trees planted in all the 9 apartment complexes surveyed in this study, the growth of 4 species of needleleaf trees and 4 species of broadleaf trees were surveyed. Juniperus chinensis 'Kaizuka' and Pinus densiflora Siebold & Zucc. out of the needleleaf trees and Malus floribunda Siebold ex Van Houtte out of the broadleaf trees showed the highest growth rate when over 5 years passed after planting and their growth rate decreased when over 10 years passed. Platycladus orientalis and Acer palmatum Thunb. in the apartment complexes that were built over 10 years ago showed the highest growth rate, which indicates that the species require a relatively long period of time for growth. The hardness of the soil at the areas where trees were planted but their soil surface was bare was analyzed. When over 5 years passed after the completion of apartment complexes, over 20 mm of the soil was found to be stamped. The physicochemical properties of soil were also surveyed and the pH level was found to have been continuously high ever since the completion. The organic content in the surveyed soil was about 1/3 of the content in fertile soil, which means that additional fertilization is required. These results indicate that the stamped soil and the health of soil can be restored, when replanting plants in bare areas, by adding plans to improve soil, such as designing drain ways around the planted areas, transporting soil for the 50 cm depth of the ground and mixing organic matters such as chaff, and simply by planting groundcover plants in the lower part of tress and shrubs.

• KDI Journal of Economic Policy
• /
• v.13 no.1
• /
• pp.115-134
• /
• 1991

The role of pension plans in the macroeconomy has been a subject of much interest for some years. It has come to be recognized that pension plans may alter basic macroeconomic behavior patterns. The net effects on both savings and labor supply are thus matters for speculation. The aim of the present paper is to provide quantitative results which may be helpful in attaching orders of magnitude to some of the possible effects. We are not concerned with the providing empirical evidence relating to actual behavior, but rather with deriving the macroeconomic implications for a alternative possibilities. The pension plan interacts with the economy and the population in a number of ways. Demographic variables may thus affect both the economic burden of a national pension plan and the ability of the economy to sustain the burden. The tax transfer process associated with the pension plan may have implications for national patterns of saving and consumption. The existence of a pension plan may have implications also for the size of the labor force, inasmuch as labor force participation rates may be affected. Changes in technology and the associated changes in average productivity levels bear directly on the size of the national income, and hence on the pension contribution base. The vehicle for the analysis is a hypothetical but broadly realistic simulation model of an economic- demographic system into which is inserted a national pension plan. All income, expenditure, and related aggregates are in real terms. The economy is basically neoclassical; full employment is assumed, output is generated by a Cobb-Douglas production process, and factors receive their marginal products. The model was designed for use in computer simulation experiments. The simulation results suggest a number of general conclusions. These may be summarized as follows; - The introduction of a national pension plan (funded system) tends to increase the rate of economic growth until cost exceeds revenue. - A scheme with full wage indexing is more expensive than one in which pensions are merely price indexed. - The rate of technical progress is not a critical element in determining the economic burden of the pension scheme. - Raising the rate of benefits affects its economic burden, and raising the age of eligibility may decrease the burden substantially. - The level of fertility is an element in determining the long-run burden. A sustained low fertility rate increases the proportion of the aged in total population and increases the burden of the pension plan. High fertility has inverse effects.

• Journal of Animal Science and Technology
• /
• v.44 no.2
• /
• pp.181-190
• /
• 2002

This study was performed to determine sequences of the mt DNA D-loop region, including $tRNA^{Pro}$ and $tRNA^{Pre}$ and to analysis sequence variation polymorphism in Korean cattle. The resulting sequencies were compared with previously published sequences for other cattle breeds(GenBank J01394). The PCR was used to amplify an 1142bp between nucleotides 15061 and 404 within the D-loop region of mt DNA using specific primers. Korean cattle showed 24 polymorphic sites by nucleotide substitutions and insertions of single base pairs. About 50% of polymorphic sites were found in positions 16042 to 16122 with the most variable region. Among these polymorphic sites, variations at 16055, 16230 and 16260 bp were detected as new sequence variants in Korean cattle. These specific polymorphic sites have not been reported in the Japanese black cattle and European cattle. Therefore, mt DNA variants in the D-loop region may be used as genetic markers for specifying Korean cattle. The frequencies of positions 169, 16302, 16093, 16042, 16119 with a high level of sequence polymorphism were 0.81, 0.56, 0.56, 0.50 and 0.43, respectively. In comparison of genetic distances, Korean cattle showed the more closely to European cattle as Bos taurus than Bos indicus such as African and India breeds. In conclusion, these mt DNA sequence polymorphisms in the D-loop region for Korean cattle may be useful for the analysis of cytoplasmic genetic variation and associations with economic important traits and genetic analysis of maternal lineage.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.2
• /
• pp.171-181
• /
• 1999

A field experiments was carried out to investigate the physicochemical properties of soil and cucumber growth in vinyl house when irrigation point was made at 0.2, 1/3, 0.5 and 1.0 bar. The obtained results was summarized as follow: The taxonomic class of the soil used was loam and each content of the required water was 4.4, 7.3, 9.6 and 13.4 mm per each irrigation time at 0.2, 1/3, 0.5 and 1.0 bar treatments in spring culture, respectively. At 0.2 bar and 1.0 bar treatments, interval of irrigation was 2.3 and 14.8 day, the times of irrigation was 37 and 6, and total irrigation volume was 163.5 and 80.3 mm, respectively. After cucumber culture, pH, EC concentration and exchangeable K content of soil at 0.2 bar treatment was distributed near to the level of improvement target while EC, available $P_2O_5$ and exchangeable base content in other treatments were higher compared to improvement target. At 1.0 bar treatment, ratios of the solid and liquid phase were 44.9 and 27.1%, respectively, and bulk density was $1.26g\;cm^{-3}$ which was the highest among the treatments. At 0.2 bar treatment, the ratio of the solid and liquid phase was 41.7 and 22.8%, respectively, and bulk density was $1.09g\;cm^{-3}$ which was the lowest. The root length and radius at 0.2 bar treatment were best, while those at 1/3 bar were worst. At 0.2 bar treatment, the total yield was 7,269 kg and the weight of good products was 5,677 kg which was the highest among treatments. At 0.33 bar treatment, the yield was the lowest with the high ratio of deformity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.847-856
• /
• 2016

Recently, with a high level of economic growth, rapid urbanization, population, environment and housing problems were accompanied in Korea. In particular, the traffic problem has become a serious social problem. As the current transportation policy has been carried out, concentrating on traffic flow, in 2015, death rate for pedestrians while walking (1,795 persons) is 38.8% compared to entire death rate in car accident (4,621 persons), so there is need to solve it. Although, crosswalk should make pedestrian cross it safely, it has been made on the basis of the width of road without exact standard for current width of the crosswalk and the location of stop line. Moreover, in the area around many campuses or commercial facilities, crosswalks are set with not considering pedestrian passage, but designed uniformly. Therefore, the purpose of this study is to estimate reasonable dimension of crosswalk considering pedestrian traffic and walking speed and it makes the accident rate lower in the crosswalk, which has a lot of problems including decisions of vehicle traffic signal time, lack of pedestrian's signal timing, pedestrian's crossing of long-distance. The following are the methodology of the study. Firstly, for crosswalk calculation of specifications, examination relating existing regulations and researches dealing with crosswalk, pedestrians and stop line is needed. After analyzing problems of current width of crosswalk and stop line, present the methodology to calculation of specifications and basing on these things, calculation of specifications for crosswalk will be decided. In conclusion, the calculation of specification and improvement of stop line for crosswalk laid out in this study are expected to be utilized as base data in case of establishing relevant safety facilities and standards.

• Journal of Environmental Impact Assessment
• /
• v.25 no.6
• /
• pp.514-524
• /
• 2016

The Bio-Climatic impact Assessment System, BioCAS was utilized to produce analysis maps of daily maximum perceived temperature ($PT_{max}$) and excess mortality ($r_{EM}$) over the entire Seoul area on a heat wave event. The spatial resolution was 25 m and the Aug. 5, 2012 was the selected heat event date. The analyzed results were evaluated by comparing with observed health impact data - mortality and morbidity - during heat waves in 2004-2013 and 2006-2011,respectively. They were aggregated for 25 districts in Seoul. Spatial resolution of the comparison was equalized to district to match the lower data resolution of mortality and morbidity. Spatial maximum, minimum, average, and total of $PT_{max}$ and $r_{EM}$ were generated and correlated to the health impact data of mortality and morbidity. Correlation results show that the spatial averages of $PT_{max}$ and $r_{EM}$ were not able to explain the observed health impact. Instead, spatial minimum and maximum of $PT_{max}$ were correlated with mortality (r=0.53) and morbidity (r=0.42),respectively. Spatial maximum of $PT_{max}$, determined by building density, affected increasing morbidity at daytime by heat-related diseases such as sunstroke, whereas spatial minimum, determined by vegetation, affected decreasing mortality at nighttime by reducing heat stress. On the other hand, spatial maximum of $r_{EM}$ was correlated with morbidity (r=0.52) but not with mortality. It may have been affected by the limit of district-level irregularity such as difference in base-line heat vulnerability due to the age structure of the population. Areal distribution of the heat impact by local building and vegetation, such as spatial maximum and minimum, was more important than spatial mean. Such high resolution analyses are able to produce quantitative results in health impact and can also be used for economic analyses of localized urban development.