• 한국산업융합학회 논문집
• /
• 제27권1호
• /
• pp.207-212
• /
• 2024

Recently, with the strengthening of environmental regulations, there has been an increasing interest in eco-friendly energy sources, leading to a trend of the increasing scale of Cargo Containment Systems (CCS) for Liquefied Natural Gas (LNG) carriers. Among these systems, membrane tanks have gained popularity in LNG transport vessels due to their superior spatial utilization and competitiveness. However, due to high initial investment costs and the difficulty in repair in case of damage, a safety layer, the secondary barrier, must be installed without fail. In this study, in order to apply a new secondary barrier to the existing membrane-type LNG CCS, tests were conducted on the fiberglass layer previously used in the Triplex-Flexible Secondary Barrier (FSB), substituting it with basalt fiber. Tensile and vertical tensile tests were performed to assess the newly applied material. Environmental tests were conducted at room temperature (25℃) and extremely low temperatures (-170℃), considering the temperatures to which substances may be exposed during LNG vessel operations. The basalt-FSB produced in this study demonstrated superior results compared to the specifications of the existing product, confirming its potential applicability for implementation.

• 한국건축시공학회지
• /
• 제16권6호
• /
• pp.545-551
• /
• 2016

막구조 건축물의 시공 증가에도 불구하고 국내에는 내화 및 방화기준이 마련되어있지 않고 일반 건축물의 내화기준을 적용하고 있어 막구조 건축물과 막재료의 특성을 반영하지 못하고 있다. 또한 막구조 건축물의 내화 및 방염성능을 확보하기 위해서는 막재료가 규정된 난연성능을 만족해야 한다. 따라서 본 연구에서는 건축용 막재의 고온에서의 안전성을 확보하기 위해 현무암섬유를 직포로 적용하였다. 그리고 막재의 강도특성과 방염 및 난연특성을 기존의 건축용 막재와 비교, 평가함으로써 막재료의 평가기준에 대한 참고자료로 삼고자 한다. 연구결과, 현무암섬유와 유리섬유 기반의 건축용 막재는 낮은 열방출율과 총방출열량을 나타내 화재안전성이 높은 것으로 확인되었다.

• 동력기계공학회지
• /
• 제17권2호
• /
• pp.108-113
• /
• 2013

In this study, lightweight aggregate was made from basalt stone powder sludge. Clay and glass powder were respectively added from 0 to 20 wt% and from 0 to 100 wt%. The glass powder helped to form glassy phase which trapped generating gas in the materials. $CaCO_3$ helping bloating process was added from 0 to 10 wt%. It was possible to produce lightweight aggregate at range from $1150^{\circ}C$ to $1200^{\circ}C$. The specimen was heated in furnace at 1100, 1150 and $1200^{\circ}C$ for 15 min, respectively, to sinter aggregates. Chemical composition of materials were determined, and characteristics were analyzed, including specific gravity, water absorption. Lightweight aggregate which was heated at $1200^{\circ}C$ had specific gravity of $0.53g/cm^3$, water absorption of 3.08%, and this value satisfied KS L 8551 standard.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.33-36
• /
• 2007

The majority of fly ash pipes in thermal power stations use steel pipes. This makes frequent replacement inevitable due to severe abrasion near the hot and curved section of pipes. Recently, there have been efforts to prevent this abrasion with lining techniques using ceramic or basalt on the inner wall of the pipe. This study uses composite and anti-wear material to maximize the anti-abrasion effects on the hot section of the pipe. The thickness of the abrasion layer was determined by the abrasion ratio of material found through the experiment; the thickness of the reinforcement layer was determined by micromechanics. Experiments were conducted on epoxy resins to test for heat and abrasion. Anti-abrasion test using particle impingement was intended to recreate realistic conditions when abrasion occurs within the hot section of an actual pipe. This study analyzes the abrasion ratio obtained from both the specimen experiment and from on-site measurement and provides evidence that a combination of composites and anti-wear agent can be used to create a fly ash pipe that is lower in costs and higher in quality than what is used currently.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.135-138
• /
• 2004

Conventional piezoelectric lead-zirconate-titanate (PZT) senor has high sensitivity, but it is very brittle. Recently polymer films such as polyvinylidene fluoride (PVDF) and poly(vinylidene fluoride­trifluoroethylene) (P(VDF-TrFE)) copolymer have been used as a sensor. The advantages of polymer sensor are the flexibility and mechanical toughness. Simple process and possible several shapes are also additional advantages. Polymer sensor can be directly embedded in a structure. In this study, nondestructive damage sensitivity of single basalt fiber/epoxy composites was investigated with sensor type and thermal damage using AE and oscilloscope. And AE waveform for epoxy matrix with various damage types was compared to each other. The damage sensitivity of two polymer sensors was rather lower than that of PZT sensor. The damage sensitivity of PVDF sensor did not decrease until thermal damage temperature at $80^{\circ}C$ and they decreased significantly at $110^{\circ}C$ However, the damage sensitivity of P(VDF-TrFE) sensor at $110^{\circ}C$ was almost same in no damage sensor. For both top and side impacts, the difference in arrival time increased with increasing internal and surface damage density of epoxy matrix.

• Ecology and Resilient Infrastructure
• /
• 제5권3호
• /
• pp.118-124
• /
• 2018

한국은 1960년대부터 경제개발의 일환으로 사회기반시설, 공업단지 등이 활발히 건설되었으며 이로 인해 현재까지 산업화가 급격히 이루어졌다. 하지만 산업화에 따라 발생하는 산업부산물 또는 폐기물의 발생량이 점차 증가하고 있다. 일부 산업부산물은 재활용되고 있지만 대부분의 폐기물은 매립되는 실정이다. 이에 따라 산업폐기물 처리를 위한 다양한 방안이 검토되고 있으나 경제성과 환경성을 고려한 기술은 구축되어 있지 않다. 따라서 본 연구에서는 제지산업과 화력발전산업에서 발생하는 제지애시, 플라이애시를 활성화하여 적용한 활성분체와 세라믹섬유를 동시 혼입한 콘크리트의 재료성능을 검토하고자 한다. 애시를 분쇄과정에서 활성화시켜 수화도를 높여 물성을 향상시켰으며 동시에 콘크리트의 균열 저감을 위해 세라믹섬유를 동시 혼입하였다. 활성분체 및 세라믹섬유의 재료성능을 검증하기 위하여 KS 규격에 의거하여 원주형 콘크리트 공시체를 제작하였으며 슬럼프 및 재령 28일 압축강도를 측정하였다. 활성분체 플라이애시 20%, 제지애시 10% 혼입 콘크리트에서 활성분체 무혼입 콘크리트 압축강도의 90% 이상으로 나타난 것으로 확인하였다.