• 마이크로전자및패키징학회지
• /
• 제22권2호
• /
• pp.47-53
• /
• 2015

인쇄회로기판 솔더 상부 및 하부 접합부의 서로 다른 표면처리 조건에 따른 Sn-3.0Ag-0.5Cu (SAC305) 접합부의 열처리 및 전류 인가에 따른 금속간 화합물 성장거동을 비교하기 위하여 in-situ 미세구조분석 및 electromigration (EM) 수명평가를 실시하였다. 솔더 접합 직후, 상부 접합부의 electroless nickel immersion gold (ENIG) 표면처리에서는 $(Cu,Ni)_6Sn_5$, 하부 접합부의 organic solderability preservative (OSP) 표면처리에서는$ Cu_6Sn_5$, $Cu_3Sn$ 금속간 화합물이 접합 계면에서 생성되었다. EM 수명평가 결과 온도 $130^{\circ}C$, 전류밀도 $5.0{\times}10^3A/cm^2$ 하에서 평균파괴시간이 약 78.7 hrs으로 도출되었고, 하부 OSP 표면처리에서 전자가 솔더로 빠져나가는 부분에서 Cu의 소모에 의한 단락이 주 손상기구로 확인되었다. In-situ 주사전자현미경을 통해 계면 미세구조 분석 결과 상부 접합부 ENIG 표면처리에서 전자의 방향에 따른 미세구조의 큰 차이가 없고 뚜렷한 손상이 관찰되지 않았으나, 하부 접합부 OSP 표면처리의 경우 전자가 솔더로 유입되는 부분에서 빠른 Cu 소모로 인한 보이드 성장이 관찰되었다. 따라서, SAC305무연솔더 접합부에서 ENIG 표면처리가 OSP 표면처리보다 보다 우수한 EM확산방지막 역할을 하여 금속간 화합물 성장을 억제하고 보다 우수한 EM 신뢰성을 보이는 것으로 판단된다.

• Journal of Periodontal and Implant Science
• /
• 제35권4호
• /
• pp.939-948
• /
• 2005

The role of the periosteum on osteointegration of $Bio-Oss^{(R)}$(Geistlich, Wolhusen/Switzerland) was studied in rabbit calvarial defect. 12 New Zealand white male rabbits between 2.8 and 4 kg were included in this randomized, blinded, prospective study. Each rabbit was anesthetized with Ketamine HCl(5 mg/kg) and Xylazine HCl(1.5 ml/kg). An incision was made to the bony cranium and the periosteum was reflected. Using a 6-mm trephine bur(3i. USA), four 8-mm defects were created with copious irrigation. The defects were classified into barrier membrane($Tefgen^{(R)}$, Lifecore Biomedical. Inc, U.S.A.) only group as a control, $Bio-Oss^{(R)}$ with barrier membrane group, $Bio-Oss^{(R)}$ with periosteum covering group, and $Bio-Oss^{(R)}$ without periosteum covering group. There were 2 rabbits in each group. The wound was closed with resorbable suture materials. Rabbits were sacrificed using phentobarbital(100 mg/kg) intravenously at 1, 2, and 4 weeks after surgery. The samples were fixed in 4% paraformaldehyde, and decalcified in hydrochloric acid decalcifying solution(Fisher Scientific, Tustin, CA) at $4^{\circ}C$ for 2-4 weeks. It was embedded in paraffin and cut into 6 ${\mu}m$ thickness. The sections were stained with H & E and observed by optical microscope. The results were as follows; 1. The periosteum played an important role in osteointegration of $Bio-Oss^{(R)}$ in bone defects. 2. When the periosteum remained intact and $Bio-Oss^{(R)}$ was placed on the defect, $Bio-Oss^{(R)}$ with periosteum covering has been incorporated into the newly formed bone from 2-week postoperatively. 3. When the periosteum was removed at the surgical procedure, invasion of connective tissue took place among the granules, and new bone formation was delayed compared to periosteum covering group. Therefore, when the bone grafting was performed with periosteal incision procedure to achieve tension-free suture, the integrity of the overlying periosteum should be maintained to avoid fibrous tissue ingrowth.

• 대한화장품학회지
• /
• 제30권3호
• /
• pp.345-352
• /
• 2004

아토피 피부염을 설명하는 데는 두 가지 패러다임이 있는데, 첫 번째는 outside-inside paradigm이고 두 번째는 inside-ouside paradigm이다. Outside-inside paradigm에 의하면 아토피 피부염을 치료하기 위한 가장 좋은 방법은 피부 장벽 기능을 회복시키는 것이다. 장벽 기능은 각질층의 특징적인 구조에 의해 유지되는데, 각질층은 층상구조의 inter-cellular lipids와 corneocyte로 구성되어 있다. 아토피 피부염 환자, 층판상 어린선 환자의 각질층 내 층상구조는 hexagonal 구조가 많이 존재하고 있음을 보였으며, 이는 Ceramide 1 타입과 long chain fatty acid의 감소 때문이라고 보여진다. 이러한 이유에서 라멜라구조를 가지며 intercellular long periodicity phase 기능을 복원할 수 있는 보습제는 각질층의 intercellular lipid의 층상구조를 복원시킬 수 있을 것이다. 또한 세라마이드와 유사세라마이드를 함유한 보습제는 손상된 피부장벽, 피부질환, 아토피 피부염을 위한 유용한 치료제로 사용할 수 있다. Inside-outside paradigm에 따르면, 아토피 피부염 등이 보조 T cell, lg E, eosinophil 등을 포함한 면역반응과 관계되는데, 특히 Th1/Th2 imbalance의 복원이 아토피 피부염을 치료하는데 효과적일 것이다. 현재 여러 종류의 면역억제제가 소개되고 있지만, 이들은 고유 면역기능을 감소시킬 우려를 가지고 있다. 따라서, 세라마이드 대사산물인 SPC와 S1P는 면역조절 기능 및 상처치유의 기능을 가짐으로써 향후 관심이 집중될 것이다.

• 대한화장품학회지
• /
• 제49권1호
• /
• pp.59-65
• /
• 2023

사이자이지움 클래비플로룸(Syzygium claviflorum (Roxb.) Wall. ex A.M. Cowan & Cowan, S. claviflorum)의 추출물 (잎, 줄기, 열매, 꽃)의 화장품 소재로써 활용되기 위한 생리활성 능력을 검증하였다. 첫번째로, S. claviflorum 추출물은 DPPH와 ABTS assay법을 이용한 항산화 실험에서 다양한 농도로 처리한 결과, 약 80% 이상의 자유 라디칼을 제거하였다. 사람 피부 표피 각질형성세포(human epidermal keratinocytes)를 이용한 세포독성 실험에서는 S. claviflorum 추출물은 낮은 세포독성을 보였다. 또한, S. claviflorum 추출물은 각질형성세포의 분화인자 (keratin (KRT)1, KRT2, KRT9, KRT10)와 피부장벽의 기능 유지에 중요한 involucrin (IVL), loricrin (LOR), filaggrin (FLG)과 claudin1 (CLDN1) 유전자의 발현을 현저히 증가시켰다. 특히, in vitro 아토피 피부염 실험에서 interleukin (IL)-4/IL-13에 의해 억제된 FLG 단백질 발현이 S. claviflorum 추출물에 의해 회복되었다. 따라서, 뛰어난 항산화 효능과 피부장벽 개선 기능을 보유한 S. claviflorum 추출물은 향후 아토피 피부염 치료제 및 화장품 개발에 유용한 소재가 될 것이다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제25권4호
• /
• pp.71-79
• /
• 2019

Purpose: The manoeuvring space at doors must be secured for users of walking aids, wheelchair users, stroller users, luggage carriers, etc., so clear criteria must be established. The korean standards for the manoeuvring space at doors need to be improved to present clear criteria depending on the type of entrance and the direction of opening and closing. Method: Korean standard, International Standard(ISO 21542, 2011), German Standard(DIN 18040-1, 2010), Austrian Standard(OENORM B 1600, 2017) and Swiss Standard(Norm SIA 500, 2009) were investigated and analyzed. A comprehensive improvement of the criteria for the manoeuvring space at doors is proposed. Results: The manoeuvring space at doors, which is essential for the disabled to use the door, shall be installed with a comprehensive consideration of the width of doors, the Circulation space, the direction of access, and the method of opening and closing of the door. Korean standards, such as the width of doors, the Circulation space, and the manoeuvring space at doors, are different from international and international standards, which require improvement of standards. The criteria for the manoeuvring space at doors shall be clearly improved so as not to be misinterpreted during the installation of doors and the BF-certification. Implication: The criteria for the installation of doors shall be presented as a comprehensive alternative through continued study of details. In addition, improvements in standards that reflect changes in international standards should be made.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제24권2호
• /
• pp.79-87
• /
• 2018

Purpose: The purpose of this paper is to provide logical basis on enlargement of toilet floor space for the disabled by "ACT ON GUARANTEE OF PROMOTION OF CONVENIENCE OF PERSONS WITH DISABILITIES, THE AGED, PREGNANT WOMEN. ETC" Revised Enforcement regulation [Asterisk 1] (2018.2.10.) and to help with making plans, designs and establishing policies by conducting experimental study with the enhanced floor area regulations. Methods: We conduct Experimental study, field work and interview for this paper. In experimental study, verification of the effective floor area was proceeded by measuring activity space for people in manual wheelchair, electric wheel chair and electric scooter and also reviewed useable area with the space expanded 0.2m both width and depth. In filed work, conducted an observation what other things (ex. sanitary equipment, hand rail and so on) can also affect the active space as well as effective floor space. In the interview, other problems and requirements that were not revealed were experimental study and observation of field work. Results : it's expected to provide better access to toilets for the disabled with the law revision of effective floor area. But, with the usage increasement of enlarged wheel chair and electric wheel chair, expanding side areas of toilet is also highly likely to be required going forward. Implications : Additional research is required on locations of exists and internal arrangement that effect the usage of toilet. It should be led to Universal design by making additional investigation and verification of the users patterns.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.160-160
• /
• 2010

Organic electronic devices require a passivation layer to ensure sufficient lifetime. Specifically, flexible organic electronic devices need a barrier layer that transmits less than $10^{-6}\;g/m^2/day$ of water and $10^{-5}\;g/m^2/day$ of oxygen. To increase the lifetime of organic electronic device, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. In this study, the passivation layer was deposited using single-process PEALD. The passivation layer, in our case, was a bilayer system consisting of $Al_2O_3$ films and a $TiO_2$ buffer layer on a poly (ether sulfon) (PES) substrate. Because the deposition temperature and plasma power have a significant effect on the properties of the passivation layer, the characteristics of the $Al_2O_3$ films were investigated in terms of density under different deposition temperatures and plasma powers. The effect of the $TiO_2$ buffer layer also was also addressed. In addition, the water vapor transmission rate (WVTR) and organic light-emitting diode (OLEDs) lifetime were measured after forming a bilayer composed of $Al_2O_3/TiO_2$ on a PES substrate.

• 한국염색가공학회지
• /
• 제13권2호
• /
• pp.28-28
• /
• 2001

Four kinds of neutral sodium salts with different anions, NaF, NaCl, NaBr, and NaI, were added to the dye bath to accurately understand the effect of anions on the reactive dyeing of silk with C. I. Reactive Black 5. The sodium cation lowered the negative surface potential of the silk and increased the dye-uptake on fille fabric as reported previously. However, because of the discrepancy in the anions′inhibition power from cation′s lowering the surface negative potential the amount of the dye on the silk fiber was different from each other in the order of $F^-\;>\;Cl^-\;>\; Br^-\;>\;I^-$. The activation energy($E_a$) for the dyeing was in the order of $F^-\;>\;Cl^-\;>\; Br^-\;>\;I^-$ but the dye-uptake on the fabric and the activation free energy(Δ$G^*$), the real energy barrier for the reaction, were in the order of $F^-\;>\;Cl^-\;>\; Br^-\;>\;I^-$ because the strength of the interaction of the anions with sodium cations was the same as the order of the latter. In other words $F^-$ exerted the weakest electrostatic force on $Na^+$and competed with the dyestuff anions least of all. The decrease in Δ$S^*$may be due to the looesly bonded activated complex of dyestuff anions, sodium cations and fiber molecules at transition state. It was clarified from the Bronsted equation that sodium salts with different anions also had fille ionic strength effect and the specific salt effect on the reactive dyeing.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제22권1호
• /
• pp.7-15
• /
• 2016

Purpose: There are the number of color tactile walking surface indicators installed in Korea, because of indefinite regulation in blind and vision-impaired persons' tactile walking surface indicators. In case of yellow tactile walking surface indicators, it shows a deviation severe color. In this study, the researchers suggested color and brightness reference for helping blind and vision-impaired persons' walking through analyzing the color references of tactile walking surface indicators and the color luminance between tactile walking surface indicators and sidewalk currently used. Method: Reasonable luminance contrast criteria is suggested by examining ways of improving the recognition and recognition of objects according to color contrast visually impaired through literature review and analyzing standards of tactile walking surface indicators and the Europe, Japan and Australia of color and luminance contrast criteria. And by examining the color of the tactile walking surface indicators reported in Korea currently used to derive the problem presented by the luminance contrast in the reference and comparison. Finally, the visually impaired tactile walking surface indicators is set for color selection criteria for the recognition rate improves. Results: In order to improve the recognition rate to be tactile walking surface indicators of the contrast of the visually impaired and the environment than the color of the tactile walking surface indicators itself to secure always a certain level or more of brightness contrast values in the set of the color of the tactile walking surface indicators so important. Implication: In order to set the blind tactile walking surface indicators color recognition based on the verification of the real pedestrian based on the results presented in this paper it is required. It is to be understood as an element of the barrier free configuration for securing the walking pedestrian safety.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
• /
• pp.56-57
• /
• 2006

In this paper, the inorganic multi-layer thin film encapsulation was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, Sputter, inorganic multi-layer thin-film encapsulation was deposited onto the Ethylene Terephthalate(PET) and their interface properties between inorganic and organic layer were investigated. In this investigation, the SiON SiO2 and parylene layer showed the most suitable properties. Under these conditions, the WVTR for PET can be reduced from a level of $0.57\;g/m^2/day$ (bare subtrate) to 1*10-5 g/$m^2$/day after application of a SiON and SiO2 layer. These results indicates that the PET/SiO2/SiON/Parylene barrier coatings have high potential for flexible organic light-emitting diode(OLED) applications.