• Journal of Korean Vacuum Science & Technology
• /
• 제1권1호
• /
• pp.30-37
• /
• 1997

Interactions of Cu films with Si substrates separated by thin layers of molybdenum and molybdenum nitride were investigated in the viewpoint of diffusion barrier to copper. the diffusion barrier behavior of the layers was studied as functions of deposition and annealing conditions by cross-sectional transmission electron microscopy and Nomarski microscopy. the layers deposited at $N_2$ gas ratios of 0.4 and 0.5 exhibited good diffusion barrier behaviors up to $700^{\circ}C$, mainly due to the phase transformation of molybdenum to $\gamma$-Mo$_2$N phase. The increase in the N gas ratio in deposition elevates the lower limit of barrier failure temperature. Futhermore, amorphous molybdenum nitride films deposited at 20$0^{\circ}C$ and 30$0^{\circ}C$ did not fail, while the crystalline $\gamma$-Mo$_2$N films deposited at 40$0^{\circ}C$ and 50$0^{\circ}C$ showed signs of interlayer interactions between Cu and Si after annealing at 75$0^{\circ}C$ for 30 minutes. Therefore, the amorphous nature of the molybdenum nitride layer enhanced its ability to reduce Cu diffusion and its stability as a diffusion barrier at elevated temperatures.

• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.505-509
• /
• 2016

We have investigated the characteristics of amorphous silicon (a-Si) thin-film solar cell by inserting barrier layer. The conversion efficiency of a-Si thin-film solar cells on graphite substrate shows nearly zero because of the surface roughness of the graphite substrate. To enhance the performance of solar cells, the surface morphology of the back side were modified by changing the barrier layer on graphite. The surface roughness of graphite substrate with the barrier layer grown by plasma enhanced chemical vapor deposition (PECVD) reduced from ~2 um to ~75 nm. In this study, the combination of the barrier layer on graphite substrate is important to increase solar cell efficiency. We achieved ~ 7.8% cell efficiency for an a-Si thin-film solar cell on graphite substrate with SiNx/SiOx stack barrier layer.

• Wind and Structures
• /
• 제20권1호
• /
• pp.75-93
• /
• 2015

This work is focused on a parametric numerical study of the barrier's bar inclination shelter effect in crosswind scenario. The parametric study combines mesh morphing and design of experiments in automated manner. Radial Basis Functions (RBF) method is used for mesh morphing and Ansys Workbench is used as an automation platform. Wind barrier consists of five bars where each bar angle is parameterized. Design points are defined using the design of experiments (DOE) technique to accurately represent the entire design space. Three-dimensional RANS numerical simulation was utilized with commercial software Ansys Fluent 14.5. In addition to the numerical study, experimental measurement of the aerodynamic forces acting on a vehicle is performed in order to define the critical wind disturbance scenario. The wind barrier optimization method combines morphing, an advanced CFD solver, high performance computing, and process automaters. The goal is to present a parametric aerodynamic simulation methodology for the wind barrier shelter that integrates accuracy and an extended design space in an automated manner. In addition, goal driven optimization is conducted for the most influential parameters for the wind barrier shelter.

• Nuclear Engineering and Technology
• /
• 제56권9호
• /
• pp.3942-3949
• /
• 2024

This study focuses on investigating the chemical degradation characteristics of cementitious barriers used in low-and intermediate-level radioactive waste repository by reactive transport modeling. The impact of the blending with supplementary cementitious materials (SCMs) in the barriers on the chemical degradation was evaluated to find the optimum barrier design. A number of different barrier designs were examined by replacing ordinary Portland cement (OPC) by SCMs (i.e., fly ash, silica fume, and blast-furnace slag). The simulation results showed that silica fume blended barrier has better durability against chemical degradation by rainwater compared to fly ash or blast-furnace slag blended barriers. In addition, the chemical durability of silica fume-based barrier increased with increasing replacement level up to about 20 %. It seems that the amount of formed calcium silicate hydrate (CSH) in the initial cement-based barrier highly affects the overall chemical durability. The newly developed reactive transport model demonstrated its capability for understanding the barrier performance and investigating the optimal design of the barrier system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.727-730
• /
• 2004

Closed-cell type barrier ribs such as honeycomb, SDR, inverse SDR and waffle types were produced using capillary molding process. Phosphor layers were formed by osmosis coating process on those barrier ribs. Using the rear plate with closed-cell ribs, the luminance and its efficiency was measured. The results demonstrated a significant improvement in efficiency by combining closed-cell type ribs with a new phosphor forming technology

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.907-910
• /
• 2008

The effect of channel length reduction on the electrical characteristics of self-aligned polysilicon TFTs has been investigated by combining experimental characteristics and 2-D numerical simulations. The role of drain induced barrier lowering and floating body effects has been carefully analized using numerical simulations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1193-1196
• /
• 2003

Noise reduction effect of a pine tree which was used to reinforce a noise barrier was studied by using reduced scale model test. The result show that the pine tree itself was less effective but the combination of pine tree and noise barrier was good for reducing the noise and sight.

• 대한한방소아과학회지
• /
• 제34권3호
• /
• pp.67-75
• /
• 2020

Objectives This study is conducted to evaluate Th2 skewed condition control through skin fat barrier formation from the treatment using Coptidis Rhizoma and Glycyrrhiza uralensis extract. Methods The 6-week-old NC/Nga mice were divided into 4 groups: Control group (Ctrl), lipid barrier eliminate treatment group (LBET), Coptidis Rhizoma and Glycyrrhiza uralensis feeding treatment after lipid barrier elimination group (CGFT), dexamethasone feeding treatment after lipid barrier elimination group (DxFT). After 3 days, differences in skin condition, improvement of skin fat barrier, and control of Th2 skewed condition of each group were observed. Results Pathologic skin damage and tissue changes were less in the CGFT group than in the LBET and DxFT groups, and Transepidermal water loss (TEWL) and pH were also significantly decreased (p < 0.05). The filaggrin intensity and positive response also increased significantly in the CGFT group (p < 0.05). Kallikrein-related peptidase (KLK) 7, Protease activated receptor (PAR)-2, Thymic stromal lymphopoietin (TSLP), Interleukin (IL)-4, and the products of the Th2 differentiation process also showed a significant decrease compared to the LBET and DxFT groups (all p < 0.05). Conclusions The Coptidis Rhizoma and Glycyrrhiza uralensis extract causes skin barrier recovery and function recovery through the formation of skin fat barrier. This leads to the conclusion that Coptidis Rhizoma and Glycyrrhiza uralensis extract can control Th2 differentiation through the formation of skin fat barrier.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.689-699
• /
• 2016

The effects of composition, structure design, and coating thickness of thermal barrier coating (TBC) on thermal barrier performance were investigated by measuring the temperature differences of TBC samples. TBCs with the thin and thick top coats were used for these studies, including TBCs with rare-earth (Gd, Yb, and La) compositions. The thermal barrier performance was enhanced with increasing the thickness of top coat even for thin TBCs, indicating that the thermal barrier performance was commensurate to the thickness of top coat. On the other hand, the bi-layered TBC, which was prepared with Yb-Gd-YSZ feedstock powder, with the buffer layer of high purity 8YSZ showed a better thermal barrier performance than that of regular purity 8YSZ. The interfaces in the bi-layered TBCs had a decisive effect on the thermal barrier performance, showing the performance enhanced with increasing numbers of interfaces. However, a new structural design and an additional process should be considered to reduce stress concentrations and to ensure interface stability, respectively, for improving thermal durability in the multi-layered TBCs.

• 대한간호학회지
• /
• 제30권1호
• /
• pp.160-170
• /
• 2000

The purpose of this study was to develop an explanatory model to predict factors related to continuous participation in the Pap smear screening among Korean women. A hypothetical model was constructed on the basis of Health Belief Model and extensive review of literature on the Pap smear screening. Exogeneous variables included in this model were knowledge, perceived sensitivity, perceived severity, negative and positive emotional responses and professional support from physicians and nurses. Endogeneous variables were threat to cervical cancer, perceived benefit of the Pap smear screening, perceived barrier, and the final outcome variable was continuous participation in the Pap smear screening. The hypothetical model was tested with an empirical study. The data was collected from 623 married women whose age range was 24 - 83 using a self-reported survey questionnaire which was developed by the researcher. It's Cronbach's alpha score ranged from .6478 to .9118. Data was collected at different locations in Seoul; a university hospital, a local health center, and apartment complexes. Data analysis was done using SPSS 7.5 WIN Program for descriptive statistics and LISREL 8.12a WIN Program for covariance structural analysis. In conclusion, threat, perceived benefit, perceived barrier, positive emotion and professional support had a significant direct effect on continuous participation in the Pap smear screening among Korean women. The results of this study also showed that perceived barrier had the most significant direct effect on continuous participation in the Pap smear screening while negative emotional response had the most significant direct effect on perceived barrier. It can be suggested that decreasing perceived barrier by reducing negative emotional responses may be the most effective strategies for increasing continuous participation in the Pap smear screening among married Korean women.