• Korean Journal of Optics and Photonics
• /
• v.28 no.2
• /
• pp.53-58
• /
• 2017

This paper presents the design and fabrication of a planar nano-diffraction grating for an integrated miniature spectrometer module. The proposed planar nano-diffraction grating consists of nonuniform periods, to focus the reflected beams from the grating's surface, and an asymmetrical V-shaped groove profile, to provide uniform diffraction efficiency in the wavelength range from 400 to 650 nm. Also, to fabricate the nano-diffraction grating using low-cost UV-NIL technology, we analyzed the FT-IR spectrum of a uvcurable resin and optimized the conditions for the UV curing process. Then, we precisely fabricated the polymeric nano-diffraction grating within 5 nm in dimensional accuracy. The integrated spectrometer module using the fabricated polymeric planar nano-diffraction grating provides spectral resolution of 5 nm and spectral bandwidth of 250 nm. Our integrated spectrometer module using a polymeric planar nano-diffraction grating serves as a quick and easy solution for many spectrometric applications.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.323-330
• /
• 2005

We fabricate PIN PD (Positive Intrinsic Negative Photo-Diode) for CWDM optical repeater and optical transmission system, and analyze theoretically the characteristics to verify the capability of device fabricated. Furthermore, we integrate CWDM filter into PD package to enhance the cost and the performance when compared to the conventional system, in which CWDM filter and PD package are linked by optical fusion splicing. The integrated CWDM PD is fabricated by three steps as follows: CWDM filter design, PD packaging, and product assembly and test. The results of measurement for PD fabricated reveal 0.5 dB bandwidth of 17 nm, isolation over 60 dB at transmission port and over 20 dB at reflection port. Also, the IMD3 for wireless communication is over 63 dBc, and the responsivity of PD presents over 0.9 A/W for 20 samples of the total 23 PD. The total insertion loss reduces about 0.4${\~}$0.7 dB due to the integrated assembly of CWDM and PD.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.30-36
• /
• 2009

Various types of ultra-wideband components with 10's of GHz bandwidth have been developed utilizing a uniplanar ultra-wideband balun, which is a simple microstrip-to-coplanar stripline (CPS) transition structure with the operating frequency range from near DC to over 40 GHz. Developed ultra-wideband components include antennas, mixers, doublers, and detectors in a carrier type and in a surface mountable type. One of surface mountable components, for example, single balanced doubler has output frequency 8 ~ 28 GHz. These high-Performance, low-cost ultra-wideband components may replace expensive conventional components, and also can be used to develop new multi-GHz OWE application areas.

• Journal of Advanced Navigation Technology
• /
• v.2 no.1
• /
• pp.53-60
• /
• 1998

This paper describes some design concepts and design parameters of RZ-SSB which allows full carrier insertion into the single side band to overcome the severe fading in aeronautical telecommunication, and it is described in ARINC Spec. in the name of AME(AM Equivalent), and the necessary transmission bandwidth of RZ-SSB is similar to that of a aeronautical telecommunication. As an amplitude limiter manage to remove the amplitude fading without degrading the quality of output signal, the receiver acts like the FM demodulators. Using the digital Signal Processing(DSP) techniques in the design of transceiver systems has become a performance enhancement of the signal quality and reliability, and making use of DSP, it's able to design low cost, compact transceiver and reduce its weight. For avionics systems is able to eliminate the inherent disadvantages in RZ-SSB, the results of experimental tests suggest that the adoption of RZ concepts is suitable for aeronautical telecommunication transceiver systems use in HF band.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.527-531
• /
• 2003

Previous researches on scalability problem of distributed virtual environment (DVE) have been mainly focused on spatial partitioning of area of interest (AOI). Congestion phenomena by avatar groups in AOI have been neglected relatively. However, AOI congestion is highly related to scalability of DVT because it exhausts system resources such as network bandwidth and rendering time, and could be a bar to perform collaboration among participants. In this paper, this will be defined as the problem that must be solved for the realization of the scalable DVE, and a model will be proposed to measure and control congestion situation in AOI. The purposes of the proposed model are to prevent high density of participants in AOI, and to protect stable collaboration in DVE. For evaluation of the performance it is compared with a previous method by defining the resource cost model which is dynamically activated to AOI congestion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.676-684
• /
• 2008

In digital video broadcasting-terrestrial (DVB-T), which is the European digital terrestrial television standard, the orthogonal frequency division multiplexing (OFDM) has been adopted for signal transmission. The main reasons using OFDM are to increase the robustness against the frequency selective fading and impulse noise, and to use available bandwidth efficiently. However, channel variation within an OFDM symbol destroys orthogonality between subcarriers, resulting in inter-carrier interference (ICI), which increases an error floor in proportional to maximum Doppler spread. This paper provides an ICI analysis in both time and frequency domains while existing literatures analyze the ICI effects mainly in frequency domain and proposes the algorithms that estimate the channel impulse response and channel variation using least square (LS) algorithm which is the most simple channel estimation technique. And we propose adaptive channel estimation algorithm that estimates the velocity of terminals. The simulation results show that proposed algorithm has similar performance with about 1.5% computational complexity of noise and ICI reduction LS algorithm in low speed environments.

• Journal of the Society of Disaster Information
• /
• v.12 no.2
• /
• pp.167-175
• /
• 2016

Korea has faced with the problem of the whole national disaster safety due to the Sewol-ho and it reminded people and government of the importance of national safety. It is needed to establish the national unified network especially focused on the disaster site and also improved in the fields of law, system and organization related to the management of disaster. To do this, PS-LTE technology must to be adopted to the network and 700MHz is the most efficient bandwidth for the network. At the same time, we have to improve the management system for the response of disaster including standard procedure and the platform of disaster response system. In order to establish realistic and efficient emergency communications network, it is effective to build own network and use leased networks together. And the cost is estimated about 5.2 trillion won.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.149-158
• /
• 2007

A In the rapidly changing media environment, radio needs to be digitized in order to provide regular compatible service. Especially, most medium high frequency Medias have program contents thar are similar to the standard FM bandwidth, so digitizing radio will bring less effect than it is expected. However, the characteristics of radio medias are mobility, individuality, site-to-site, wide service coverage, immediate delivery and publicity, so it is necessary to study the future of radio media to provide continuous services, moreover, the main discussion regarding balanced development between medias will be the trend of the digitization of radio. Also it is easy and will cost less to change compared to other medias. AM was the first media to broadcast in Korea, and its network is spread all over Korea, also the receivers are the most widely distributed which means the signal reaches everywhere in Korea. In this study, the proper service model for AM digital radio is provided in this environment in which all Medias are rapidly digitizing due to the advancement of digital technology. The results of experimental are based on library study and KBS data of sound wave.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.805-814
• /
• 1999

In this paper, elliptic function bandpass filters using ceramic coaxial resonators are designed. Since elliptic function filters have better performance of frequency selectivity than those based on Butterworth or Chebyshev, therefore it is possible to make better use of limited frequency resources. Elliptic function bandpass filters using ceramic coaxial resonators are designed for reducing it's size, weight, cost and for easy manufacturing and tuning. From measurements, an accurate resonator model is obtained and the coupling coefficient values are extracted. Based on these results, elliptic function bandpass filters are designed. The experimental results have shown that the 8th order elliptic function filter of 959 MHz center frequency with 28 MHz bandwidth using coaxial ceramic resonators have about more tan 17 dB return loss, 5 dB insertion loss, more than 20 dB attenuation at $f_c\pm$5 MHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.809-815
• /
• 2003

It is very important to get very high switching speed as well as low phase noise of frequency synthesizer in the OFDM/FH communication system. In this paper we compare the phase noises and switching speeds of the conventional PLL and digital hybrid PLL(DH-PLL) frequency synthesizer, also, we investigate the effect of phase noise on the performance of OFDM/FH communication system. DH-PLL has high switching speed property at the cost of circuit complexity and more power consumption. Unlike the conventional PLL in which the phase noise and switching speed have the trade off relationship in respect of loop filter bandwidth, DH-PLL frequency synthesizer can perform fast switching speed and low phase noise simultaneously. Under the condition of same hopping speed requirement, DH-PLL can achieve faster switching speed and lower SNR penalty compared with conventional PLL in the OFDM/FH communication system.