• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1728-1735
• /
• 1989

A design procedure for microstrip bandpass filters using step impedance resonators (SIR's) and tapped input/output to a conventional parallel coupled line bandpass filter is presented. The filter configuration consisting of both half-wavelength and SIR's suppreses to spurious resonance response near the second harmonics, while tapping techniques offer benefit in situations where the impractical. The measured frequency responses of the designed filter are in close agreement with the computed responses.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.6
• /
• pp.702-708
• /
• 2019

The range resolution of echo sounders can be improved by enhancing the transducer bandwidth. We designed a bandpass matching network for expanding the bandwidth of a transducer by scaling in both impedance and frequency after transforming a lowpass network into a bandpass configuration for a third-order Bessel filter. We measured the effect of the Bessel matching network for a 50 kHz sandwich type transducer on the transmitting voltage response (TVR), receiving sensitivity (SRT) and figure of merit (FOM), using a chirp echo sounder system. Both the simulation and experimental results indicated that the transducer with a bandpass matching network was capable of producing a symmetrical acoustic output over a wider bandwidth (8.25 kHz) than was the transducer without a matching network (3.75 kHz). By implementing the Bessel matching network, we achieved a 120% bandwidth enhancement.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.1229-1235
• /
• 1995

In this paper an elliptic response dual-mode 4-pole bandpass filter was designed, manu-factured, and tested. A dual-mode filter having two stages cascaded double-tuned cavities which are resonant in two independent orthogonal TE113 circular-cavity modes and provide a bandpass response. A 4-pole dual-mode elliptic function bandpass filter has a center frequency of 14.022 GHz with a bandwidth of 36 MHz which is the first channel of the KOREASAT up-link frequency. The measured experimental results of a dual-mode filter are 1 dB insertion loss in the passband and 20 dB out-of-rejection.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2299-2304
• /
• 2011

In this paper, we propose the methodology to make the bandpass filters for the Smart Grid IED(Intelligent Electronic Device) smaller than the conventional bandpass filters. The size-reduction of the filters and the filter performances are indebted to devising small CRLH(composite right- and left-handed) resonators and coupling them as the metamaterial structures. The design methodology is validated by the equivalent circuit to be compared with the reliable full-wave EM simulation, and the proposed metamaterial filter outperforms the standard parallel-edge coupled filter with respect to the miniaturization and frequency response.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.317-322
• /
• 2003

In this paper, we design a slow-wave bandpass filter that uses a microstrip line periodically loaded with microstrip ing resonators for WLAN(5 GHz). Unlike conventional slow-wave filters, this filter is designed to produce a narrow passband at the fundamental mode of the resonators and provide lower insertion loss than that of parallel- or cross-coupled ring bandpass filters. A PBG(Photonic Band Gap) structure patterned in the ground plane is used to suppress the spurious transmission and extend out-of-band rejections Experimental result shows that the first spurious response in the stopband of the slow-wave bandpass filter can be rejected using a PBG structure.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.95-101
• /
• 2008

This paper presents a novel bandpass filter design method for suppressing spurious response in the GSM band and effectively reducing the overall size with the unbalanced-conditioned metamaterials. Compared to the conventional bandpass filters based on half-or quarter-wave resonators, the CRLH(composite right/left-handed) bandpass filter works excellently in harmonic-suppression by 40$\sim$50 dB and 80 %-miniaturization using the zero-order resonators bridged by Inductive-coupling Inverters suggested first time. The proposed technique, with the equivalent circuit and dispersion diagram, is validated by performance predictions and experiments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.237-246
• /
• 1999

A miniaturized waveguide bandpass filter is designed by combining a corrugated lowpass structure and a highpass configuration based on the cut-off effect of waveguides. It is smaller than the conventional waveguide bandpass filter composed of half-wavelength resonators and has wider spurious free characteristics. Optimized design data for a seven-order waveguide bandpass filter with the symmetrical structure are given at the center frequency of 10 GHz with 800 MHz bandwidth. Measured bandwidth of the center frequency of 9.97 GHz is 840 MHz and measured insertion loss is 0.97dB, The length of the bandpass filter is 64.38mm. The first spurious response is produced at 26.1 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1251-1258
• /
• 1997

Generally, it is very important to study selective coupling between cavities of the filter structure using multimode cavity resonator. In this paper, we have manufactured 5-pole bandpass filter(BPF) using dual and triple-mode cavity resonator. To do so, we have derived the formulas for coupling coefficient about coupling between TE-modes from TM/TE-mode's tangential and lognitudinal field intensities each other. To implement the Chebyshev response, the intercabity slot combining dual-mode and triple-mode is designed to couple one H-field of TE-mode parallel to slot plate. In this paper, specially it is derived the formulas for T $E_{11p}$-mode from TE-modes, and determined after obtaining location and size of intercabity slot from the equation. In this ppaer, based on this result, we designed and implmented teh bandpass filter operated at the center frequency of 14.5GHz with a Chebyshev response. For the manufactured cavity filter, dual-mode and triple-mode cavity are resonted by two orthogonal T $E_{113}$-modes, and by two orthogonal T $E_{113}$-modes and one T $M_{012}$-mode, respecitively. The 2-stage 5-pole BPF proposed in this paper has the insertion loss of -2.32dB, the reflection loss of -15dB in the passband, and the out-or-rejection of -67dB.

• Journal of electromagnetic engineering and science
• /
• v.18 no.1
• /
• pp.41-45
• /
• 2018

In this study, a short-ended coupled line with a short-circuit stub transmission line bandpass filtering impedance transformer is presented. The general designed equations are derived on the basis of circuit theory. The design curves are provided to examine the characteristic of the proposed impedance transformer. The proposed circuit is suitable for high termination impedance. To validate the design formulas, a $400-50{\Omega}$ impedance transformer is designed and fabricated at the operating center frequency ($f_0$) of 2.6 GHz. The measured results show a good agreement with the simulation. The measured insertion and return losses are 0.6 dB and 22.5 dB at $f_0$, respectively. The measured return loss is higher than 20 dB within the passband frequency of 2.51-2.7 GHz. Moreover, the stopband attenuation is higher than 25 dB from DC to 1.64 GHz of the lower stopband and from 3.12 GHz to 6.4 GHz of the higher stopband.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1332-1-1332-4
• /
• 1998

This paper described design and simulation of the high-Tc superconducting (HTS) microstrip bandpass filter (BPF) on MgO substrate using $Y_1Ba_2Cu_3O_{7-x}$ films that show superconductivity ${at \fallingdotseq}90$ K. Design parameters for the characteristic of the bandpass filter in Ku-band were obtained by approximate design formulas. It used parallel coupled stripline stepped impedance resonators (SIR). Microwave design system, MDS(EEsorf S/W) was used to derive the optimal pattern of the filters and to simulate frequency response. In computer-aided results, optimally designed HTS filters got good performance compared with the gold counter-parts on frequency response $S_{21}$, $S_{11}$.