• Journal of Aquaculture
• /
• v.15 no.2
• /
• pp.79-86
• /
• 2002

This study is the first attempt to understand the feeding physiology of a sea-urchin larva on a red-tide dinoflagellate. Fifteen day old larvae of S. intermedius capture C. polykrikoides cells by localized reversal of ciliary beats. No failure to transporte the algal cells from theciliated band to mouth and no rejection at the mouth suggest that C. polykrikoides has no feeding deterrence to S. intermedius larvae. The trend obtained for the clearance rate of S. intermedius larvae is similar to that of other sea urchin larvae. Thus, the clearance rate decreased as the algal concentration increased. Maximum clearance rate of S. intermedius on C. polykrikoides was 17.7 $\mu l$/larva/hr. Ingestion rate rapidly increased at lower algal concentrations and saturated at higher concentrations. There was no inhibition in ingestion rate at the highest prey concentration of ca. 3000 cells/ml. Maximum ingestion rate of S. intermedius on C. polykrikoides was 131 ngC/larva/d, which is higher than that reported for the larvae of the mussel Mytilus gal-lotrovincialis, but lower than that of the ciliate Strombidinopsis sp. The grazing rate, calculated by combining the field data on algal abundances with experimental data on ingestion rate, suggests that due to its low abundance, sea urchin Iarva has no significant grazing impact on C. polykrikoides population.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.245-256
• /
• 1995

Rugate filters of inhomogeneous refractive index were designed using the Fourier transform and the effect of reflectance, stop bandwidth, optical thickness, and Q function on the rugate filter was investigated. An iterative correction process using a merit function was employed to fit an initial design to the target spectrum. Three Q functions derived by Sossi, Bovard, and Fabricius, respectively, were compared in terms of the number of iteration, merit function, and optimum optical thickness. The result shows that after a number of iterations the Q functions by Bovard and Fabricius produce high rejection rugate filters closer to the target spectrum than the Sossi's Q function and the optimal optical thickness is determined by the stop-band width of the rugate filter. ilter.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.936-943
• /
• 2009

Dynamic voltage restorer(DVR) is now more preferable enhancement than other power quality enhancement in industry to reduce the impact of voltage faults, especially voltage sags to sensitive loads. The main controllers for DVR consists of PLL(phase locked loop), compensation voltage calculator and voltage compensator. PLL detects the voltage faults and phase. Compensation voltage calculator calculates the reference voltage from the source voltage and phase. With calculated compensation voltage from PLL, voltage compensator restores the source voltage. If PLL detect ideal phase, compensation voltage calculator calculates ideal compensation voltage. Therefore, PLL for DVR is very important. This paper proposes the new method of PLL in DVR. First, the power circuit of DVR system is analyzed in order to compensate the voltage sags. Based on the analysis, new PLL for improving transient response of DVR is proposed. The proposed method uses band rejection filter(BRF) at q-axis in synchronous flame. In order to calculate compensation voltage in commercial instruments, the PQR theory is used. Proposed PLL method is demonstrated through simulation using Matlab-Simulink and experiment, and by checking load voltage, confirms operation of the DVR

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6B
• /
• pp.544-552
• /
• 2003

This paper suggests an instruction code sufficiency algorithm preventing data collision when multiple transponders attempt to connect in the radio frequency identification system. Conventional time domain procedure generates unconditional collision. On the other hand, this algorithm prevents data collision by transmitting data when it meets instruction code. When multiple transponders are transmitting data coincidently, they exploit desired data with using difference of arrival time generated by recognition distance, respectively. As a result of simulation, utilizing the wireless recognition system, adopting the suggested algorithm, operating in 13.56MHz frequency band, it verify that there is Anti-collision and data loss by ensuring transmission time difference of one bit by adopting this algorithm.

• Journal of Sensor Science and Technology
• /
• v.25 no.1
• /
• pp.8-12
• /
• 2016

A planar, light-weight, and low-cost notch filter structure is required for the KSTAR ECEI (Electron Cyclotron Emission Imaging) system to protect the mixer arrays from spurious plasma heating power. Without protection, this heating power can significantly degrade or damage the performance of the mixer array. To protect mixer arrays, a frequency selective surface (FSS) structure is the suitable choice as a notch filter to reject the spurious heating power. The FSS notch filter should be located between the lenses of the ECEI system. This paper presents a 170 GHz FSS notch filter for the KSTAR ECEI sensor application. The design of such an FSS notch filter is based on the single-sided square loop geometry, because that makes it relatively insensitive to the incident angle of incoming wave. The FSS notch filter exhibits high notch rejection with low pass-band insertion loss over a wide range of incident angles. This paper also reviews the simulated and measured results. The proposed FSS notch filter might be implemented in other millimeter-wave plasma devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.511-516
• /
• 2006

In this raper, we propose the Sequentiel Couleur Avec Memoire or Sequential Color with Memory (SECAM) video encoder system using modified anti-cloche filters and the SECAM video decoder system using a band pass filter (BPF) and an error-free square root. The SECAM encoder requires an anti-cloche filter recommended by International Telecommunication Union-Recommendation (ITU-R) Broadcasting service Television (BT) 470. However, the design of the anti-cloche filter is difficult because the frequency response of the anti-cloche filter is very sharp around rejection-frequency area. So, we convert the filter into a hish pass filter (HPF) by shifting the rejection frequency of 4.286MHz to 0Hz frequency. The design of HPF becomes very easy, compared to that of the anti-cloche filter. The proposed decoder also uses an error-free square root, two differentiators and trigonometric functions to extract color-component information of Db and Dr accurately from frequency modulation (FM) signals in SECAM systems. Also, the BPF in decoder it used for removing color noise in chrominance and dividing CVBS into chrominance and luminance. The proposed systems are experimentally demonstrated with Altera FPGA APEX20KE EP20K1000EBC652-3 device and TV sets.

• Korean Journal of Optics and Photonics
• /
• v.16 no.5
• /
• pp.469-475
• /
• 2005

An integrated photonic microwave bandpass filter has been proposed and demonstrated incorporating a coherently coupled microring resonator in low-loss polymers. The proposed device may feature compact site, simple structure, tuning via the thermooptic and electrooptic effect, and flexible integration with other electrical and optical devices. The resonator was designed to have an extremely small bandwidth so that it could be used to selectively pass the optical signal carrying the microwave signal to attain efficient bandpass filtering. We made and tested two resonators with a single ring and double rings, and performed a theoretical fitting of their measured transfer curves to predict the performance of the microwave filters based on them precisely. It was found that as the number of the rings used for the resonator increases, the bandwidth gets smaller, the rolloff sharper, and the band rejection higher. Finally our filter exhibited the center frequency of 10GHz, the 3-dB bandwidth of 1.0GHz, the corresponding quality (Q) factor of 10, and the rejection outside of the passband of more than 25dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.834-838
• /
• 2007

A coupled-defected ground structure(C-DGS) having closely-located DGS cells is proposed for high performance bandstop filter applications. The negative coupling of ground currents between adjacent DGS cells greatly improves the stopband characteristics. We have measured the attenuation slope of 110.8 dB/GHz and -20 dB rejection band from 3.8 GHz to 15.5 GHz. Compared to the double-plane BSF, the proposed BSF improved the sharp cutoff response 7.6 times. We expect the C-DGS be helpful to improve the performance of DGS application circuits and also to extend the possible DGS applications.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.62-68
• /
• 2002

It is well known that the MDVR beamforming outperforms the conventional delay-sum beamformer in the sense of noise rejection and bearing resolution. However, the MDVR method requires long observation time to achieve high frequency resolution. The STMV method uses the steered covariance matrix of sensor data, so it has an ability to form an adaptive weight vector from a single time-series snapshot. But it uses the same weight vector across all frequencies. In this paper, we propose an SSMV method. The basic idea of the SSMV method is to decompose a full frequency band into several subbands to acquire a weight vector for each subband, individually. Also the wrap may be divided into several subarrays in order to reduce a computational load and the bandwidth of each subband. Simulations using real sea trial data show that the proposed SSMV method has good performance with short observation time.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.75-82
• /
• 2000

In this Paper, a new type of feedforward linearizer using a delay line which controls the phase characteristics of the correction amplifier block is proposed. The extra delay line provides the control-ability of IM signals so that the IM rejection is accomplished without the conventional pilot tone. The error signal loop consists of several key components such as phase shifter and attenuator, subtractor. These key components are replaced by new designs in order to obtain better linearization characteristics without the pilot tone generator which is indispensable in the conventional linearizer designs. The proposed linearizer was designed at Korean PCS band and combined with 35W HPA manufactured by KMW inc., and tested with two-tone signals separated 0.6MHz apart at the center frequency of 1855MHz. The experimental results show C/l improvement by 16.9 ~ 24.6 dB over 15 dB dynamic range(30 ~45 dBm) which gave IMD of 58.5~63.2 dBc for the designed LPA.