• Title/Summary/Keyword: Band Ratio Algorithm

Search Result 118, Processing Time 0.024 seconds

Voice Activity Detection based on Adaptive Band-Partitioning using the Likelihood Ratio (우도비를 이용한 적응 밴드 분할 기반의 음성 검출기)

  • Kim, Sang-Kyun;Shim, Hyeon-Min;Lee, Sangmin
    • Journal of Korea Multimedia Society
    • /
    • v.17 no.9
    • /
    • pp.1064-1069
    • /
    • 2014
  • In this paper, we propose a novel approach to improve the performance of a voice activity detection(VAD) which is based on the adaptive band-partitioning with the likelihood ratio(LR). The previous method based on the adaptive band-partitioning use the weights that are derived from the variance of the spectral. In our VAD algorithm, the weights are derived from LR, and then the weights are incorporated with the entropy. The proposed algorithm discriminates the voice activity by comparing the weighted entropy with the adaptive threshold. Experimental results show that the proposed algorithm yields better results compared to the conventional VAD algorithms. Especially, the proposed algorithm shows superior improvement in non-stationary noise environments.

The Validation of Landsat TM Band Ratio Algorithm using In-water Optical Measurement (수중 광학측정을 이용한 Landsat TM 밴드비율 알고리듬 검증)

  • Jeong, Jong-Chul
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.4 no.1
    • /
    • pp.18-26
    • /
    • 2001
  • Landsat TM band ratio algorithms were made by in-water optical measurement data of each sampling points for water quality monitoring of coastal area using Landsat TM satellite data. The algorithm was derived from in-water optical reflectance data which was measuring by the PRR(profiling reflectance radiometer). And, in-water optical reflectance data were applied to Landsat TM bands. Relationship between in-water optical reflectance and pigments proposed by the ratio of TM band 1 and band 2 showed to as follows; $Y=3.8352{\times}(R(band\;1)/R(band\;2))^{-2.1978}$ ($R^2$=0.7069) and, relationship of the ratio of TM band 1 and band 3 as follows; $Y=23.288{\times}(R(band\;1)/R(band\;3))^{-1.5243}$ ($R^2$=0.8062). Calculated the upwelling radiance of water surface and radiance of TM showed the ratio of atmospheric effect. In the coastal area Rayleigh and Mie scattering of atmosphere is to make over 80% of normalized radiance of Landsat TM. In order to apply in-water algorithm obtained by PRR, we had to calculate the atmospheric effects at sampling site. And, the quantitative analysis of in-water components using Landsat TM data need the calibration of in-water algorithm and effective method of atmospheric correction.

  • PDF

The Validation of Band Ratio Algorithm for Estimation of Transparency of Coastal Area (연안해역의 투명도 추정을 위한 밴드비율 알고리듬 검증)

  • Jeong, Jong-Chul
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.4 no.1
    • /
    • pp.27-33
    • /
    • 2001
  • SDD(Secchi disk depth) algorithm were composed of SeaWiFS bands combination using in-water optical data sets obtained Lake Sihwa, Kyungki Bay, Chunsu Bay, and Chinhae Bay. SDD algorithm were compared with in-situ data. Reflectance band ratio, $R_{rs}$(490/665) had the highest correlation($R^2$=0.8188) with in-situ data. For in-water algorithm applied to satellite data, reflectance band ratios of Landsat TM data were calculated. However, the results of applied Landsat TM had the low correlation, these reason were discussed in this paper.

  • PDF

Specific Material Detection with Similar Colors using Feature Selection and Band Ratio in Hyperspectral Image (초분광 영상 특징선택과 밴드비 기법을 이용한 유사색상의 특이재질 검출기법)

  • Shim, Min-Sheob;Kim, Sungho
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.19 no.12
    • /
    • pp.1081-1088
    • /
    • 2013
  • Hyperspectral cameras acquire reflectance values at many different wavelength bands. Dimensions tend to increase because spectral information is stored in each pixel. Several attempts have been made to reduce dimensional problems such as the feature selection using Adaboost and dimension reduction using the Simulated Annealing technique. We propose a novel material detection method that consists of four steps: feature band selection, feature extraction, SVM (Support Vector Machine) learning, and target and specific region detection. It is a combination of the band ratio method and Simulated Annealing algorithm based on detection rate. The experimental results validate the effectiveness of the proposed feature selection and band ratio method.

PAPR reduction algorithm using Hadamard transform and phase shift in OFDM systems (Hadamard 변환과 위상 천이를 이용한 OFDM 시스템의 PAPR 감소 기법)

  • 구현철
    • Proceedings of the IEEK Conference
    • /
    • 2001.06a
    • /
    • pp.233-236
    • /
    • 2001
  • Orthogonal freqency division multiplexing (OFDM) is an attractive technique for achieving high-bit-rate wireless data transmission. However, the potentially large peak-to-average power ratio (PAPR) has limited its application; An OFDM signal with the large PAPR can cause power degradation (In-band distortion) and spectral spreading (Out-of-band distortion) by being clipped passing through a power amplifier. Thus, we propose the combining algorithm of Hadamard transform and phase shift, which is ascribed to the relation between the correlation of the IFFT input sequence function and PAPR. Extensive computer simulations show that the combining algorithm is an effective technique to reduce PAPR.

  • PDF

Genetic Algorithm Optimization of LNA for Wireless Applications in 2.4GHz Band

  • Kim Ji-Yoon;Yang Doo-Yeong
    • International Journal of Contents
    • /
    • v.2 no.1
    • /
    • pp.29-33
    • /
    • 2006
  • The common-source low noise amplifier(LNA) with inductive degeneration using a genetic algorithm is designed and tested for a down converter in an industrial, scientific and medical (ISM) band application and a wireless broadband internet service (WiBro). The genetic algorithm optimizes the reflection coefficients to be well matched the input and output ports between multistage transistor amplifiers, and it generates low voltage standing wave ratio as well as gain flatness of the amplifier. The stability and the gain flatness of the LNA have been improved by combining the matching circuits and the series feedback microstrip lines with inductive degeneration at common-source port. In the frequency range of ISM band and WiBro application operating at $2.3GHz{\sim}2.5GHz$, the measured power gain and maximum voltage standing wave ratio (VSWR) of the LNA are $41{\pm}0.5dB$ and 1.3, and the noise figure of the LNA is lower than 0.85dB. The above results are agreed well with the theoretical values of the amplifiers.

  • PDF

Voice Activity Detection Algorithm using Wavelet Band Entropy Ensemble Analysis in Car Noisy Environments (자동차 잡음 환경에서 웨이브렛 밴드 엔트로피 앙상블 분석을 이용한 음성구간 검출 알고리즘)

  • Lee, G.H.;Lee, Y.J.;Kim, M.N.
    • Journal of Korea Multimedia Society
    • /
    • v.16 no.9
    • /
    • pp.1005-1017
    • /
    • 2013
  • Voice activity detection is very important process that voice activity separated form noisy speech signal for speech enhance. Over the past few years, many studies have been made on voice activity detection, but it has poor performance in low signal to noise ratio environment or fickle noise such as car noise. In this paper, it proposed new voice activity detection algorithm using ensemble variance based on wavelet band entropy and soft thresholding method. We conduct a survey in a lot of signal to noise ratio environment of car noise to evaluate performance of the proposed algorithm and confirmed performance of the proposed algorithm.

Optimized Design of Wide-Band Subarray Using a Genetic Algorithm (유전 알고리즘을 이용한 광대역 부배열 최적화 설계)

  • Kim, Doo-Soo;Lee, Dong-Koog;Kim, Seon-Joo
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.23 no.4
    • /
    • pp.415-423
    • /
    • 2012
  • This paper specifies on optimized design of wide-band subarray using a Genetic Algorithm. First wide-band radiator was designed at triangle lattice of infinite array structure. It is the radiator of notch type that has a wide-band characteristic of ratio 2:1 between maximum and minimum frequency satisfying active reflection coefficient under -10 dB at boresight. And a Genetic Algorithm was applied to optimize subarray partition of antenna consisting of 1,100 array elements. It was confirmed that an optimized subarray antenna has a 4.5-5.5 dB more improved maximum SLL (Side-Lobe Level) than regular subarray antenna.

Suppression of IEEE 802.11a Interference in TH-UWB Systems Using Singular Value Decomposition in Wireless Multipath Channels

  • Xu, Shaoyi;Kwak, Kyung-Sup
    • Journal of Communications and Networks
    • /
    • v.10 no.1
    • /
    • pp.63-70
    • /
    • 2008
  • Narrow-band interference (NBI) from the coexisting narrow-band services affects the performance of ultra wideband (UWB) systems considerably due to the high power of these narrow-band signals with respect to the UWB signals. Specifically, IEEE 802.11a systems which operate around 5 GHz and overlap the band of UWB signals may interfere with UWB systems significantly. In this paper, we suggest a novel NBI suppression technique based on singular value decomposition (SVD) algorithm in time hopping UWB (TH-UWB) systems. SVD is used to approximate the interference which then is subtracted from the received signals. The algorithm precision and closed-form bit error rate (BER) expression are derived in the wireless multipath channel. Comparing with the conventional suppression methods such as a notch filter and a RAKE receiver, the proposed method is simple and robust and especially suitable for UWB systems.

A New Hearing Aid Algorithm for Speech Discrimination using ICA and Multi-band Loudness Compensation

  • Lee Sangmin;Won Jong Ho;Park Hyung Min;Hong Sung Hwa;Kim In Young;Kim Sun I.
    • Journal of Biomedical Engineering Research
    • /
    • v.26 no.3
    • /
    • pp.177-184
    • /
    • 2005
  • In this paper, we proposed a new hearing aid algorithm to improve SNR(signal to noise ratio) of noisy speech signal and speech perception. The proposed hearing aid algorithm is a multi-band loudness compensation based independent component analysis (ICA). The proposed algorithm was compared with a conventional spectral subtraction algorithm on behind-the-ear type hearing aid. The proposed algorithm successfully separated a target speech signal from background noise and from a mixture of the speech signals. The algorithms were compared each other by means of SNR. The average improvement of SNR by ICA based algorithm was 16.64dB, whereas spectral subtraction algorithm was 8.67dB. From the clinical tests, we concluded that our proposed algorithm would help hearing aid user to hear clearly a target speech in noisy conditions.