• 정보처리학회논문지A
• /
• 제8A권1호
• /
• pp.42-47
• /
• 2001

In this paper, we present a curve fitting algorithm using a ball curve. Our algorithm is recursive method for fitting, which is not a traditional ball function but a continuous ball function. This algorithm consists of two steps. The first step, it is classified the composite corner points to joint points until selected from the given data set. The second step is the curve fitting. The basis function for curve fitting is use to ball function. Also, the weighted least square method, to insert knot, is an efficient method for piecewise ball curve and ball curve segments will be smoothly connected at all composit points. The proposed algorithm will be applied to represent image representation, like fonts, digital image and GIS.

• 한국기계가공학회지
• /
• 제3권2호
• /
• pp.46-52
• /
• 2004

The most of reducers consist of many gear parts, but a ball reducer never contains a gear. As the ball reducer with gearless has no back lash, it is necessary more and more to precision machine. The reducing of ball reducer happens by cycloid curves and all instant relative velocity centers always pass on a given constant position when rotational running. Then, it is difficult to calculate cycloid curve for design and machining. So, this paper studied a software for the design of the ball reducer design and machined all parts included among cycloid curve. By using the developed software, this study has large benefit to design every ball reducer.

• 한국운동역학회지
• /
• 제12권2호
• /
• pp.109-130
• /
• 2002

따라서 본 연구의 목적은 국가대표 수준급 대학 우수 야구 투수를 대상으로 한 3차원 영상분석을 통한 데이터를 가지고 직구 커브볼에 대한 구간별 운동학적 패턴을 비교 분석하여 자료를 제시하는데 있다. 본 연구는 부산 D대학교 우완 오버핸드 투수 가운데 국가대표 2명과 수준급 대학선수 2명, 총 4명을 대상으로 직구 커브 투구시 구간별로 나타나는 여러 운동학적 변인의 차이를 비교 분석한 결과 다음과 같은 결론을 얻었다. 직구 및 커브볼 투구시 구간별, 국면별 투구시간은 거의 비슷하게 나타냈으며, 직구의 총 소요시간은 1.78${\pm}$0.07초이며 커브 총 소요시간은 1.77${\pm}$0.11초로 나타났다. 직구 및 커브볼 투구시 Z(상 하)방향에 대한 신체 중심의 위치변화는 구간별, 국면별 거의 차이가 나지 않았다. 직구 및 커브볼 투구시 왼쪽 다리의 무릎높이는 각각 $125.38{\pm}11.85cm,\;124.95{\pm}11.63cm$로 큰 차이가 없었다. 신장대비율(%H)로는 직구, 커브 각각 68.42${\pm}$5.53(%H), 68.40${\pm}$5.45(%H)로 나타났다. 직구 및 커브볼 투구시 스트라이드 거리는 각각 140.35${\pm}$4.96cm, 144.83${\pm}$1.69cm로 커브 투구시 더 많은 스트라이드 거리를 보였다. 직구 및 커브볼 투구시 왼쪽 슬관절 ST 구간과 LKU 구간, HBP 구간에서는 별 차이가 없었지만 LFC, MCP, BRP구간에서는 직구보다 커브 투구시 슬관절 각도가 더 굴곡 된 것으로 나타났다. 직구 및 커브볼 투구시 오른팔 견관절 각도는 ST 구간과 LKU구간, HBP 구간에서는 별차이가 없었다. 직구 및 커브볼 투구시 오른팔 주관절 각도는 ST 구간과 LKU구간, HBP 구간에서는 별차이 가 없었다. LFC구간과 MCP구간에서는 직구보다 커브가 다소 많이 굴곡되었고, BRP구간에서 는 직구, 커브 모두 다 근소한 차로 신전 된 것으로 나타났다. 직구 및 커브볼 투구시 오른팔 수관절 각도는 LFC 구간과 MCP 구간에서는 커브가 직구보다 더 신전되었다. 그리고 BRP 구간은 직구가 커브보다 더 신전 된 것으로 나타났다.

• 한국CDE학회논문집
• /
• 제2권4호
• /
• pp.253-266
• /
• 1997

Pencil-curve machining, which is a single-pass ball-end milling along a concave edge on adie surface, is widely employed in die-surface machining. The cutter-path used for pencil-curve machining, which is the trajectory of the “ball-center point” of a ball-endmill sliding along a concave-edge region on the die surface, is called pencil-curve. Presented in the paper is a pencil-curve tracing algorithm in which “concave-type” sharp edges are computed from a “virtually digitized” model of the tool-envelope surface. The resulting “initial” pencil-cures are then refuted by applying a series of fairing operations. illustrative examples and methods for enhancing accuracy are also presented. The proposed pencil-curve tracing algorithm has been successfully implemented in a commercial CAM system specialized in die-machining and in the CAD/CAM system CATIA.

• 한국정보처리학회논문지
• /
• 제7권4호
• /
• pp.1271-1278
• /
• 2000

A general curve and surface is a basic method to generate Free-form object using the fundamental properties of blending function. In typical method, there is an overhead of calculating to present Free-form object with the line segments and interpolation algorithm, In this paper, for resolving this problem efficiently, it will propose the flexible Free-form curves/surfaces using Ball curve shape-preserving property. This method includes Geometric Continuity that is needed to design Free-form Surface of high degree consisted with many curves. Also, when lots of data are reduced using Geometric Property of Free-form curves, the shape-preserving property of resulting object can be maintained, then it can represent any Free-form object with less calculating .

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.291-294
• /
• 2003

Ball indentation tests have been used to estimate the mechanical properties of materials by some investigators. In this study, load-depth curves from ball indentation tests have been analysed using the geometric conditions of ball indentation. Series of numerical calculations and experimental results showed that those curves could be simplified by linear functions. After linearizing the indentation curves, the estimation process of the flow properties became straight forward and the scatter of results could be drastically reduced.

• 한국수소및신에너지학회논문집
• /
• 제27권2호
• /
• pp.230-235
• /
• 2016

The purpose of this study is to evaluate the gas leakage for a 30-inch ball valve. The ball valve was designed and manufactured for a natural gas transportation through a long-distance pipeline mainly installed in the permafrost region. The gas leakage assessment is based on the pressure testing criteria of international standards. Pressure conditions of the gas leakage test was employed 70 bar, 100 bar, and 110 bar. The amount of the gas leakage at each pressure condition was small and had a value under the pressure testing criteria, ISO 5208. Gas leakage with respect to the test pressure was predicted by the polynomial curve fitting using the experimental results. It is found that the gas leakage rate according to the pressure is proportion to a second order curve.

• 한국수소및신에너지학회논문집
• /
• 제27권3호
• /
• pp.311-317
• /
• 2016

This paper presents the flow characteristics of a ball valve used for a gas pipeline. Understanding of the internal flow of a ball valve is an important to analyze the physical phenomena of the valve. Present experimental study was performed by IEC 60534-2-3, the international standard for an industrial control valve testing procedure. Pressure measured at upstream and downstream of the valve, flow-rate and gas temperature passing the inside of the gas pipeline were measured with respect to valve opening rates. Throughout the experimental measurement of the ball valve, empirical equation of the pressure drop between the ball valve according to the mass flow rates is successively obtained using a polynomial curve fitting method. In addition, flow coefficient for determining the valve capacity is also analyzed with respect to valve opening rates using the curve fitting method.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.243-246
• /
• 1999

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.962-966
• /
• 2004

Ball screw feed drive systems have been broadly used in machine tools or precision automatic feed systems. Recently, modern machine tools require high speed and high precision and drive system to achieve high productivity. Unfortunately, a feed drive system, even though it was optimum designed, may experience severe transient vibrations during high-speed operation if its feed rate control is unsuitable. A rough feed rate curve having discontinuity in its acceleration profile causes a serious vibration problem in the feed slide system. This paper presents a feed rate optimization of a machine tool feed slide system, which is driven by a ball screw, for its minimum vibrations. Firstly, a 6-degree-of-freedom lumped parameter model was proposed for the vibration analysis of a ball screw driven machine tool feed drive system. Next, a feed rate optimization of the feed slide was carried out for minimum vibrations. The feed rate curve optimization strategy is to find out the most appropriate acceleration profile having finite jerk. Of course, the optimized feed rate should approximate to the desired one as possible. A genetic algorithm with variable penalty function was used in this feed rate optimization.