• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1991년도 춘계학술대회논문집; 한국해사기술연구소, 대전; 1 Jun. 1991
• /
• pp.99-103
• /
• 1991

본 논고에서는 Radial 및 Axial 하중을 동시에 받을 수 있고, 예압에 의해 주축강성을 증대시킬수 있으며, Ball수의 증가로 부하능력을 향상시킨 초정 밀.초고속용 Angular ball bearing을 조합 사용하고, 고속회전에 지금까지 개 발된 ball bearing 윤활방법 중 가장 효과적인 간헐적인 oil 공급과 air 압력 으로, 계속 ball을 냉각, 윤활시켜주는 air oil 윤활법의 채용과, 국내 공작기 계 제조회사들이 주로 사용하는 일본 FAMUC AC Spindle motor(FAMUC-H type : 8000-15000rpm)를 사용해서 초고속 주축의 최적 설계조건을 제시하기 위한 기초연구 단계로 MT40-12000rpm 급의 Machining center용 Cartridge type의 Spindle unit개발을 통해서 주축설계에 따른 문제점과 연구용 주축제작의 생산 기술적 문제점 및 진동특성을 검토 하고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.139-142
• /
• 1995

Inconel 718 is one of the most difficut workpiece for machining, So it is necessary to evaluate the machining characteristics of Inconel 718 In this study, High speed machining of this material was carried out with Tin coated WC ball endmill and TiN coated HSS ball endmill. The cutting force and shape of machined surface and cip type were investigated according to variation of cutting speed,feed rate and depth of cut

• Tribology and Lubricants
• /
• 제5권2호
• /
• pp.60-67
• /
• 1989

For the life prediction and fatigue failure prevention of the constant velocity joint, the maximum equivalent stress and its location in depth from the contact area are essential. These values give the fundamental information to determine the depth of the surface hardening treatment at the contact area. Contact stresses are evaluated at the surface and subsurface of the ball groove of the Weiss type constant velocity joint. The maximum contact pressure and the maximum equivalent stress are obtained. The effects of various parameters such as the radius of ball groove, friction coefficient, and residual stress are studied. The maximum equivalent stress and the maximum contact pressure increase as the radius of the ball grove increases. The location of the maximum equivalent stress moves toward surface as the friction coefficient increases. It was also found that the maximum equivalent stress becomes minimum when the compressire residual stress is about 0.16 times of the maximum contact pressure.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.96-101
• /
• 2001

This paper shows the temperature characteristics of a high speed angular contact ball gearing which is 7004C type with ISO P2 tolerance class. A built-in motor type high speed spindle which adopts an oil-air lubrication system was used to measure the temperature rise up to 60,000rpm. The gearing temperature was measured using thermocouples that were attached to the outside surfaces of the outer rings. The result showed that the continuous test method which was suggested in this paper is more effective than on and off method and the lubrication oil supply rate should be reduced in high speed rolling bearings as long as the seizure does not occur. And the result were confirmed that the bearings packed with ceramic balls are superior to those with steel balls in temperature characteristics.

• 한국자동차공학회논문집
• /
• 제8권1호
• /
• pp.124-134
• /
• 2000

The power wteering system for automobiles is becoming core popular for supporting steering efforts of the drivers, especially for a parking lot maneuver. Though hydraulic power steering has been widely used for a long time, the efficiency of that is not high enough. The motor driven power steering system can solve the problems associated with the hydraulic power steering system. In this study, dynamic model and control algorithm of the ball screw type of MDPS systenem have been derived and analysed by using the method of discrete modeling technology. To improve steering feel and power steering characteristics, the additional scheme is proposed to the conventional power boosting control algorithm. Through simulations, control gain effects to the steering angle gain in the frequency domain were verified. The steering returnability and steering torque phase lag in on-center handing test were performed also.

• 호남수학학술지
• /
• 제41권1호
• /
• pp.19-34
• /
• 2019

The article is written with a view to introducing the new idea of an F-contraction on a closed ball and have new ${\acute{C}}iri{\acute{c}}$ type fixed point theorems in the framework of a complete metric space. That is why this outcome becomes useful for the contraction of the mapping on a closed ball instead of the whole space. At the same time, some comparative examples are constructed which establish the superiority of our results. It can be stated that the results that have come into being give proof of extension as well as substantial generalizations and improvements of several well known results in the existing comparable literature.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.31-36
• /
• 1997

Thermal expansion of the ball screw in semi-closed loop type CNC Lathe directly affects the position precision along the travel axis. In this paper, the thermal displacement of the ball screw is estimated by using macro variables. The estimated displacements of the ball screw are managed by calculating the interval of pitch error rate in the NC. The thermal behaviour of the ball screw of the CNC Lathe, under the constant operating conditions, was measured to examine the effectiveness of this compensation method. The results showed that thermal displacement of the ball screw could be maintained its accuracy better than 6${\mu}{\textrm}{m}$ while applying this method.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.45-51
• /
• 1999

Thermal expansion of the ball screw can directly affect the accuracy of positioning along the travel axis in the semi-closed loop type CNC Lathe. In this paper, use of MACRO variables can make the thermal displacement of the ball screw estimated. Also, the estimated displacements of the ball screw are controlled by calculating the interval of pitch error rate in the Numerical Control(NC). Under the constant operating conditions, the thermal expansion of the ball screw was measured to confirm the effectiveness of the compensation method in the CNC Lathe. By using this method the results show that the thermal displacement of the ball screw could be reduced to 20% compared with ordinary method.

• 반도체디스플레이기술학회지
• /
• 제5권1호
• /
• pp.1-4
• /
• 2006

Recently, Ball Grid Arrays(BGAs) are getting used more frequently for a package type. The connectors on a BGA consist of a large number of small solder balls in a grid shape on its bottom side. However, since balls of BGAs mounted on PCBs are not visible, inspection before mounting them is indispensable. High speed non-contact 3D measurement technologies are necessary far real-time measurement of ball height, the most important inspection item. In this paper, an accurate 3D data acquisition system for BGAs is proposed that can acquire 3D profile at high speed using a 3D smart camera and laser slit ray projection. Some clipping and morphological filtering operations are employed to remove spiky error data, which occur due to reflections from some ball area to camera direction.

• 한국의류산업학회지
• /
• 제20권1호
• /
• pp.75-82
• /
• 2018

This study was attempted to clarify differences in sizes and shapes of foot between 20's and 60-70's women and analyzed the characteristics of elderly women's foot shapes as compared with those of young. The 2D data were 101 elderly and 101 young women in Seoul and Gyeonggi-do. The results are as follows: Firstly, the foot length of the elderly was shorter than that of the young, the foot breadth and the heel width were widened, but the toes breadth became smaller and the deformity of the toe 1 and the first metatarsal part appeared. Secondly, in the Foot Index, there was a significant difference in age group, the young is more than the elderly in the narrow type, standard type, the elderly women showed more than three times the young in the wide type. Thirdly, in the factor analysis for the foot type classification, 'foot length' factors in both age groups were large. Next, young group were influenced by 'toes breadth', lateral ball breadth' factors, elderly group was influenced by the 'lateral ball breadth', 'medial ball breadth' factors. Lastly, in the cluster analysis of the elderly group, the types of sole were classified as W-Type(20.8%, wide foot and toes, large heel), H-type(20.8%, small toes breadth, heel), D-type(31.7%, long length and wide lateral ball) and A-Type(26.7%, which is found only in the elderly, small length and large toes angle). As a result, it is necessary to design the shoes that match the characteristics of the soles of the elderly women.