• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.845-852
• /
• 2012

The diaphragm-type stylus probe was developed for ultra-precision on-machine measurement (OMM) application. This probe is equipped with two diaphragms which are parallel and one capacitive sensor is used for detecting the vertical motion of end tip in the stylus when it is contacted to the optical freeform surface. For better performance of proposed probes, several design parameters such as axial stiffness and the lateral deformations were investigated with finite element analysis techniques. To verify the feasibility, the profiles of the master sphere ball were measured on the ultra-precision milling machine. The measurement results show that the proposed probe can calculate the radius of the circle within the accuracy of 0.1 ${\mu}m$ for the ultraprecision optical surface.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.212-219
• /
• 1998

During machining of dies and molds with sculptured surfaces. the cutter contact area changes continuously and results in cutting force variation. In order to implement cutting force prediction model into a CAM system, an effective and fast method is necessary. In this paper. a new method is proposed to predict mean cutting force. The cutter contact area in the spherical part of the cutter is obtained using Z-map, and expressed by the grids on the cutter plane orthogonal to the cutter axis. New empirical cutting parameters were defined to describe the cutting force in the spherical part of cutter. Before the mean cutting force calculation, the cutting force density in each grid is calculated and saved to force map on the cutter plane. The mean cutting force in an arbitrary cutter contact area can be easily calculated by summing up the cutting force density of the engaged grid of the force map. The proposed method was verifed through the slotting and slanted surface machining with various inclination angles. It was shown that the mean force can be calculated fast and effectively through the proposed method for any geometry including sculptured surfaces with cusp marks and holes.

• 한국축산식품학회지
• /
• 제36권4호
• /
• pp.476-486
• /
• 2016

This study investigated the effect of the powder produced by ball-milling the outer layer of annatto (Bixa orellana L.) seeds on the physicochemical properties as well as the antioxidant and antimicrobial activities of pork patties over 14 d of refrigerated storage (4±1℃). Five pork patty treatments were produced containing three different concentrations of annatto seeds, 0.1, 0.25 and 0.5% (ANT0.1, ANT0.25, ANT0.5), 0.1% ascorbic acid (AA0.1), and a control (CTL). Based on the results, annatto seed powder appeared to show antioxidant activity. The Hunter color values of pork patties were affected by the addition of annatto seed powder, which increased the redness and yellowness values, but decreased the lightness of the patties (p<0.05). To evaluate the antioxidative effects of annatto on pork patties, thiobarbituric acid reactive substances (TBARS) and peroxide values (POV) were analyzed over 14 d of refrigerated storage. Treatments containing annatto seed showed lower TBARS and POV than control (CTL) samples (p<0.05). The volatile basic nitrogen (VBN) of the pork patties containing annatto seeds were lower than that of CTL at the end of storage (p<0.05). Although no differences in total bacterial counts were observed between control and treated patties, those containing annatto seeds had lower microbial counts for Enterobacteriacease than CTL or AA 0.1%. Therefore, annatto seed powder might be a good source of natural antioxidants for the production of meat products.