• New & Renewable Energy
• /
• v.16 no.4
• /
• pp.41-48
• /
• 2020

This study performed a single hole operation method using a balancing well-cross-mixed underground heat exchanger, and conducted thermal performance studies of an SCW-type underground heat exchanger using a two-well. The study attempted to change the existing operating method of the two adjacent SCW underground heat exchangers with one ball each. The SCW-type geothermal heat exchanger is considered to enable up to 20% of bleed discharge at maximum load, which makes groundwater usage unequal. The efficiency factor of the geothermal system was improved by constructing the discharged water by cross-mixing two balancing wells to prevent the discharge of groundwater sources and keep the temperature of the underground heat exchanger constant. As a result of the cooling and heating operation with the existing SCW heat exchange system and the balancing well-cross-mixed heat exchange system, the measured performance coefficient improved by 23% and 12% in cooling and heating operations, respectively. In addition, when operating with a balanced cross-mixing heat exchange system, it has been confirmed that the initial basement temperature is constant with a standard deviation of 0.08 to 0.12℃.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.3
• /
• pp.59-65
• /
• 2010

This paper proposes a modified heuristic mixed model assembly line (MMAL) balancing algorithm that provides consistent station assignments on a model by model basis as well as on a station by station. Basically, some of single model line balancing techniques are modified and incorporated to be fit into the MMAL. The proposed algorithm is based on N.T. Thomopoulos' [8] method and supplemented with several well proven single model line balancing techniques proposed in the literature until recently. Hoffman's precedence matrix [2] is used to indicate the ordering relations among tasks. Arcus' Rule IX [1] is applied to generate rapidly a fairly large number of feasible solutions. Consequently, this proposed algorithm reduces the fluctuations in operation times among the models as well as the stations and the balance delays. A numerical example shows that the proposed algorithm can provide a good feasible solution in a relatively short time and generate relatively better solutions comparing to other three existing methods.

• Journal of Sensor Science and Technology
• /
• v.27 no.3
• /
• pp.165-169
• /
• 2018

A single-axis Cubli frame realized simply with an IMU sensor and DC motor is presented herein. To maintain the balance on the Cubli frame, an LQR controller based on a Lagrangian derivation of the dynamics was designed, which utilized the state variables of the frame angle and its angular acceleration, as well as the wheel angle and its angular acceleration. The designed LQR controller showed a settling time balancing capability of approximately two seconds and 40% of the maximum overshoot in Matlab/Simulink simulations. Our experimental results of the fabricated Cubli frame matched with the simulation results. It maintained balancing at the reference position even though an initial offset as well as external disturbance during the balancing was applied.

• Journal of TMJ Balancing Medicine
• /
• v.12 no.1
• /
• pp.15-21
• /
• 2022

This case is witten for presenting the effect of the TMJ balancing therapy using the TMJ balancing appliance which normalizes the yin and yang balance of the brain-nervous system including the Meridian system. The balancing appliance was used in patient with cervical dystonia, and clinical outcome measurements were performed through clinical observations in specific movement and actions. The patient displayed positive changes after the treatment and the effect was well-maintained during the treatment period. For the more precise evaluation, clinical and biological studies of temporomandibular balancing therapy (TBT) are needed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.7
• /
• pp.22-27
• /
• 2015

In this paper, the problem of voltage unbalancing in series-connected multiple electric double-layer capacitors(EDLCs) is studied. Good understanding of this problem is required in order to increase reliability and stability of an energy storage system comprising EDLCs. Existing methods to settle voltage unbalancing cannot mitigate the problem enough for each cell, since most method have been applied to each module. For equalizing between cells, Zener diode which is one of passive method have been well examined in literature. However, Zener have well not used in balancing due to heating problem. In addition, It is difficult to choose Zener diode fitted rating voltage of EDLC, because of its internal resistance. Thus, we proposed passive balancing using Zener diode by analyzing parasitic element of Zener and EDLC. To experimentally confirm the balancing effect, we compared in two occasions which are with and without passive. As a result, proposed passive balancing circuit mitigated unbalanced voltage gap between EDLCs.

• Journal of TMJ Balancing Medicine
• /
• v.10 no.1
• /
• pp.32-36
• /
• 2020

This case is witten for presenting the effect of the yin-yang balancing therapy using the TMJ balancing appliance which normalizes the yin and yang balance of the brain-nervous system including the Meridian system. The balancing appliance was used in patient with fibromyalgia syndrome, and clinical outcome measurements were performed through clinical observations in specific movement and actions. The patient displayed positive changes after the treatment and the effect was well-maintained during the treatment period. For the more precise evaluation, clinical and biological studies of temporomadibular balancing therapy (TBT) are needed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.9
• /
• pp.895-899
• /
• 2014

This paper presents the balancing control of a unicycle robot using air power. Since the robot has one wheel to move forward and backward, the balancing control is quite challenging. To control the balancing angle, the accurate angle estimation by a tilt and a gyro sensor is required a priori. A complementary filter is implemented to eliminate the defects of two sensors and to fuse together to estimate an accurate balancing angle. The optimal design of air ducts is found empirically. Experimental studies of the balancing control of a unicycle robot confirm that the robot is well regulated without falling down.

• Physical Therapy Korea
• /
• v.23 no.4
• /
• pp.16-26
• /
• 2016

Background: Deficiencies in the ability to maintain balance are common in elderly. Augmented feedback such as knowledge of results (KR) can accelerate learning and mastering a motor skill in older people. Objects: We designed this study to examine whether one session of Wii-Fit game with self-regulated KR is effective for elderly people, and to compare the effect of two different timings of self-regulated KR conditions. Methods: Thirty-nine community-dwelling elders, not living in hospice care or a nursing home, participated in this study. During acquisition, two groups of volunteers were trained in 10 blocks of a dynamic balancing task under the following 2 conditions, respectively: (a) a pre-trial self-regulated KR ($n_1=18$), or (b) a post-trial self-regulated KR ($n_2=21$). Immediate retention tests and delayed retention tests of balancing performance were administered in 15 minutes and 24 hours following acquisition period, respectively. Results: In both groups, significant improvements of balancing performances scores were observed during the acquisition period. Regardless of the group, mean of balancing performance scores on retention tests were well-maintained from the final session. There were no significant differences between groups in balancing performance scores during the acquisition period (p>.05); however, the post-trial self-regulated KR group exhibited significantly higher balancing performance scores in both the immediate retention test and delayed retention test than that of the pre-trial self-regulated KR group (p<.05). Conclusion: Therefore, subjects who regulated their feedback after a dynamic balancing task, during the acquisition period, experienced more efficient motor learning during the retention period than did subjects who regulated their feedback before a dynamic balancing task. Accordingly, in case of presenting the KR of motor learning in clinical settings to elders who reduced dynamic balance abilities, the requesting time of KR is imperative according to self-estimation processes as well as types of KR and practice.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.12 no.4
• /
• pp.15-20
• /
• 2016

Even though the control device of the heating system works well, insufficient water flow rates can degrade control performance and thermal comfort. The water flow rate should be adjusted appropriately to cope with the heating load of each zone. In order to solve these problems, a new balancing concept 'dynamic balancing' was proposed where a balancing valve opening can be automatically modulated according to the heating condition of the room. This study analyzed the effects of dynamic balancing upon indoor thermal environment and energy consumption in a radiant floor heating system through field measurement. Under part-load conditions, the use of a dynamic balancing is a more effective method to reduce energy consumption and to prevent a cavitation. Dynamic balancing is able to help boost the temperature of a room in the start-up period.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1812-1820
• /
• 2017

This paper analyzes a symmetric active cell balancer for a battery management system. The considered cell balancer uses a forward converter in which the circuit structure is symmetric. This cell-balancing method uses fewer switches and is simpler than the previously proposed active cell-balancing circuits. Active power switches of this cell-balancing circuit operate simultaneously with the same pulse width modulation signals. Therefore, this cell-balancing circuit requires less time to be balanced than a previous bidirectional-forward-converter-based cell balancer. This paper analyzes the operational principles and modes of this cell balancer with computer-based circuit simulation results as well as experimental results in which each unbalanced cell is equalized with this cell balancer. The maximum power transfer efficiency of the investigated cell balancer was 87.5% from the experimental results. In addition to the experimental and analytical results, this paper presents the performance of this symmetric active cell-balancing method.