• 한국운동역학회지
• /
• 제15권2호
• /
• pp.11-20
• /
• 2005

This study has a purpose on contributing to apprehend safe and right way to stop to the inline skate beginners and to the instructors who teaches line skating on the basis for the result of the kinematical analysis on Heel brake stop movement of the inline skate, focusing on the displacement on COG, angle displacement of ankle joint, angle displacement of knee joint, angle displacement of hip joint, using a 3D image method by DLT. To achieve this goal, we analysed the kinematical factor of the 3 well-trained inline skating instructors and obtained the following results. 1. During the movement of heel-brake stop, when strong power was given to a stable and balanced stop and the lower limbs, if the physical centroid is lowered the stability increases, and if it is placed high from the base surface, as the stability decreases compared to the case of low physical centroid, we should make a stop by placing a physical centroid in the base surface and lowering the hight of physical centroid. 2. To make a stable and balanced stop and to provide a strong power to the lower limbs, it is advisable to make a stop by decreasing an angle displacement of ankle joint during a "down" movement. In case of the left ankle joint, in all events and phases the dorsiflexion angle showed a decrease. Nevertheless, in the case of the right ankle joint, the dorsiflexion angle shows an increase after a slight decrease. The dorsiflexion angle displacement of ankle joint can be diminished because of the brake pad of the rear axis frame of the right side inline skate by raising a toe, but cannot be more decreased if certain degree of an angle is made by a brake pad touching a ground surface. To provide a power to a brake pad, it is recommended to place a power by lowering a posture making the dorsiflexion angle of the left ankle joint relatively smaller than that of the right ankle. 3. To make a stable and balanced stop and to add a power to a brake pad, the power must be given to the lower limbs in lowering the hight of physical centroid. For this, it is recommended to make a down movement by decreasing the flexion angle of a knee joint and it is necessary to make a down movement by a regular decrease of the angle displacement of knee joint rather than a swift down movement in every event and phase. 4. The right angle displacement of hip joint is made by lowering vertically the hight of physical centroid as leaning slightly forward. If too narrow angle displacement of hip joint is made by leaning forward too much, the balance is lost during the stop by placing the center in front. To make a stable and balance stop and to place a strong power to the lower limbs, it is recommendable to make a narrow angle by lower the hip joint angle. However, excessive leaning of the upper body to make the angle too narrow, can cause an instable stop and loss of physical centroid. After this study, it is considered to assist the kinematical understanding during the heel brake stop movement of the inline skate, and, to present basic data in learning a method of stable and balanced stop for the inline skating beginners or for the inline skate instructors in the present situation of the complete absence of the study in inline skating.

• 한국전자통신학회논문지
• /
• 제8권9호
• /
• pp.1383-1389
• /
• 2013

본 연구는 불안정지지면 훈련을 통한 발목관절위치감각의 변화와 동요면적 변화간의 상관관계를 알아보고자 실시하였다. 건강한 성인 남녀 48명을 대상으로 무작위로 불안정지지면군(n=24)과 안정지지면군(n=24)으로 나누어 동일한 운동 프로그램을 적용하여 주 3회씩 6주 동안 실시하였다. 불안정지지면군은 균형운동 패드에서, 안정지지면군은 단단한 지면에서 운동을 실시하였다. 운동 전 후에 발목관절위치감각의 변화와 동요면적의 변화를 알아보았다. 그 결과, 불안정지지면군에서 발목관절위치감각 오차와 동요면적은 유의하게 감소하였다(p<.05). 그리고 불안정지지면군에서만 발목관절위치감각 오차의 변화량과 동요면적 변화량간의 유의한 상관관계를 보였다. 따라서 본 연구는 불안정지지면에서의 고유수용성감각 운동을 통해 발목관절위치감각 변화와 동요면적 변화간의 유의한 상관관계가 있음을 알 수 있었다.

• Journal of Nutrition and Health
• /
• 제29권5호
• /
• pp.480-488
• /
• 1996

This study was performed to investigate the effect of various types of calcium sources on calcium and bone metabolism. Sprague-Dawley male rats weighing approximately 89.3g were divided into 4 groups and fed experimental diets containing 0.5% calcium for 5 weeks. Four different calcium salts were used for the study : calcium phosphate, calcium lactate, calcium gluconate, and calcium carbonate. Food intake showed no significant difference n accordance with the type of calcium salt, but bo요 weight gain and food efficiency were lower in calcium gluconate and calcium carbonate groups. There was significant differences in liver, thymus and epididymal fat pad weight with the of calcium salt ; the calcium gluconate group showed lower values compared to the other groups. Femur and scapular length were higher in calcium lactate and calcium carbonate groups. Wet weight, dry weight, and density of the femur tended to be lower in the calcium gluconate group than the other groups, but this difference was not statistically significant. The calcium content of the other groups. The calcium gluconate group showed higher urinary calcium and lower calcium absorption and balance. In conclusion, calcium and bone metabolism were different according to the type of calcium sources consumed.

• Journal of Animal Science and Technology
• /
• 제54권3호
• /
• pp.227-231
• /
• 2012

This study was conducted to investigate the effect of a horse riding program on balancing ability in children with cerebral palsy. Eleven children (five males and six females) diagnosed with cerebral palsy participated. The horse riding exercises (walking and trotting) were conducted twice per week for 30 minutes during 24 weeks. Balancing ability was measured three times at pre, mid, and post-test using an air pad by the same physical therapist. The data were analyzed using a two-way repeated-measures analysis of covariance with time (0, 12, and 24 weeks) using SPSS version 18.0. A comparison of horse riding between patients with hemiplegia and paraplegia was conducted with the Willcoxon signed-ranktest at a predetermined probability rate of 5%. The results showed a significant increase in balancing ability after horse riding than that before horse riding (p<0.01). The average balancing score increased greater in males ($54.59{\pm}84.05$) than that in females ($27.84{\pm}12.67$) after the horse riding exercise program compared to that before the program (p < 0.05). Thus, horse riding exercise was considered an effective to improve balance in children with cerebral palsy. These results provide useful basic data for horse riding for the disabled.

• 한국유체기계학회 논문집
• /
• 제12권6호
• /
• pp.41-46
• /
• 2009

This paper deals with the operating-speed (high-speed) balancing of a refinery gasoline HDS (hydrodesulfurization) process recycle-gas 8-stages compressor rotor. A low-speed balancing condition of the rotor was measured as maintaining the G2.5 level. But an inspection run of operating-speed balancing condition, using tilting-pad journal bearings of actual use, showed that while it could be continuously-operated safely at a rated speed of 10,500 rpm, the rotor would not be able to run over 11,000 rpm as the vibration increased very sharply, approaching 11,000 rpm. In order to cure that a series of operating-speed balancing, which first calculated balance correction-weights by applying the influence coefficient measured and calculated at 10,500 rpm and then implemented correction works, was carried-out. The final operating-speed balancing results showed that the vibrations at the bearing pedestals represented very good levels of 0.2 mm/s by decreasing to as much as the 1/10 of the original vibrations and particularly, even at a targeted maximum continuous operating speed, MCS, of 11,500 rpm the vibrations represented about 1 mm/s, which is the operating-speed balancing vibration specification of API. Therefore, the expansion of MCS was successfully accomplished through the operating-speed balancing.

• 마이크로전자및패키징학회지
• /
• 제20권4호
• /
• pp.7-11
• /
• 2013

As thermosonic ball bonding is developed for more and more advanced applications in the electronic packaging industry, the control of process stresses induced on the integrated circuits becomes more important. If Cu bonding wire is used instead of Au wire, larger ultrasonic levels are common during bonding. For advanced microchips the use of Cu based wire is risky because the ultrasonic stresses can cause chip damage. This risk needs to be managed by e.g. the use of ultrasound during the impact stage of the ball on the pad ("pre-bleed") as it can reduce the strain hardening effect, which leads to a softer deformed ball that can be bonded with less ultrasound. To find the best profiles of ultrasound during impact, a numerical model is reported for ultrasonic bonding with capillary dynamics combined with a geometrical model describing ball deformation based on volume conservation and stress balance. This leads to an efficient procedure of ball bond modelling bypassing plasticity and contact pairs. The ultrasonic force and average stress at the bond zone are extracted from the numerical experiments for a $50{\mu}m$ diameter free air ball deformed by a capillary with a hole diameter of $35{\mu}m$ at the tip, a chamfer diameter of $51{\mu}m$, a chamfer angle of $90^{\circ}$, and a face angle of $1^{\circ}$. An upper limit of the ultrasonic amplitude during impact is derived below which the ultrasonic shear stress at the interface is not higher than 120 MPa, which can be recommended for low stress bonding.

• The Journal of Korean Physical Therapy
• /
• 제17권3호
• /
• pp.297-310
• /
• 2005

Open kinetic chain exercise has lost favour in rehabilitation after cruciate ligament reconstruction due to concerns that this exercise is harmful to the graft and will be less effective in improving function. Therefore rehabilitation has focused over the past decade on closed kinetic chain exercise. Open kinetic chain and closed kinetic chain exercises were compared for their effects on proprioception, muscle strength and knee instability in the early period of cruciate ligament reconstruction rehabilitation. The study subjects were 14 patients in 28weeks from cruciate reconstruction surgery(11 male, 3 female; mean age = 44.36 years). Closed kinetic chain exercise group used ball, balance pad and air cushion, to perform weightbearing exercises and the open kinetic chain exercise group used elastic rope and N-K table, to perform non-weightbearing exercises. Between tests, subjects trained 5 times per week for 2 weeks. Statistical analysis was by Wilcoxon signed rank test and Mann Whitney U test. In result, this study shows that both open and closed kinetic chain exercise programs lead to an improved muscle strength and Lysholm score. But there was no improvement in proprioception at both exercises. Closed versus open kinetic chain exercise in early period of rehabilitation after cruciate ligament reconstruction surgery do not differ in their effects on knee proprioception, muscle strength and instability. But the effect of closed kinetic chain exercises was showed more improvement than open kinetic chain exercises between pre-post exercises. Therefore further study is required to assess effect of both groups in more long period.

• 대한통합의학회지
• /
• 제2권1호
• /
• pp.109-116
• /
• 2014

Purpose : The purpose of this study was to perform the calf-raise exercise on the stable support surface and unstable support surface for comparing deference of the gastrocnemius thickness changes that measured by ultrasonography. Method : Subjects stand on unstable support surface and a stable support surface with both feet. Keeping calf-raise position in the 3 seconds, and then had to return back to the starting position. Total of 3 sets of 15 repetitions performed and give a 30-second rest between each set. In this way, exercise performed 3 times a week, performed a total of 6 weeks. Result : 1. gastrocnemius muscle thickness before and after exercise in experimental group A was significantly different(p<.05). 2. gastrocnemius muscle thickness before and after exercise in experimental group B was significantly different(p<.05). 3. gastrocnemius muscle thickness in experimental group A and experimental group B was significantly difference(p<.05). Conclusion : In conclusion, calf-raise exercise on unstable support surface was more efficient than stable support surface for increasing thickness of gastrocnemius.