• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.238-238
• /
• 2015

There are demands for water environmental analysis of discharge processes in paddy fields, however, it is not fully understood in nutrients discharge process for watershed modeling. As hydrological processes both surface and ground water and agricultural water managements are so complex in paddy fields, the development of lowland paddy fields watershed model is more difficult than upland watershed model. In this research, the improvement of SWAT (Soil and Water Assessment Tool) model for a paddy watershed was conducted. First, modification of surface inundated process was developed in improved pot hole option. Those modification was evaluated by monitoring data. Second, the monitoring data in river and drainage channel in lowland paddy fields from 2012 to 2014 were analyzed to understand discharge characteristics. As a case study, Imbanuma basin, Japan, was chosen as typical land and water use in Asian countries. In this basin, lowland paddy fields are irrigated from river water using small pumps that were located in distribution within the watershed. Daily hydrological fluctuation was too complex to estimate. Then, to understand surface and ground water discharge characteristics in irrigation (Apr-Aug) and non-irrigation (Sep-Mar) period, the water and material balance analysis was conducted. The analysis was composed two parts, watershed and river channel blocks. As results of model simulation, output was satisfactory in NSE, but uncertainty was large. It would be coming from discharge process in return water. The river water and ground water in paddy fields were exchanged each other in 5.7% and 10.8% to river discharge in irrigation and non-irrigation periods, respectively. Through this exchange, nutrient loads were exchanged between river and paddy fields components. It suggested that discharge from paddy fields was not only responded to rainfall but dynamically related with river water table. In general, hydrological models is assumed that a discharge process is one way from watershed to river. However, in lowland paddy fields, discharge process is dynamically changed. This function of paddy fields showed that flood was mitigated and temporally held as storage in ground water. Then, it showed that water quality was changed in mitigated function in the water exchange process in lowland paddy fields. In future, it was expected that hydrological models for lowland paddy fields would be developed with this mitigation function.

• 마이크로전자및패키징학회지
• /
• 제20권4호
• /
• pp.7-11
• /
• 2013

As thermosonic ball bonding is developed for more and more advanced applications in the electronic packaging industry, the control of process stresses induced on the integrated circuits becomes more important. If Cu bonding wire is used instead of Au wire, larger ultrasonic levels are common during bonding. For advanced microchips the use of Cu based wire is risky because the ultrasonic stresses can cause chip damage. This risk needs to be managed by e.g. the use of ultrasound during the impact stage of the ball on the pad ("pre-bleed") as it can reduce the strain hardening effect, which leads to a softer deformed ball that can be bonded with less ultrasound. To find the best profiles of ultrasound during impact, a numerical model is reported for ultrasonic bonding with capillary dynamics combined with a geometrical model describing ball deformation based on volume conservation and stress balance. This leads to an efficient procedure of ball bond modelling bypassing plasticity and contact pairs. The ultrasonic force and average stress at the bond zone are extracted from the numerical experiments for a $50{\mu}m$ diameter free air ball deformed by a capillary with a hole diameter of $35{\mu}m$ at the tip, a chamfer diameter of $51{\mu}m$, a chamfer angle of $90^{\circ}$, and a face angle of $1^{\circ}$. An upper limit of the ultrasonic amplitude during impact is derived below which the ultrasonic shear stress at the interface is not higher than 120 MPa, which can be recommended for low stress bonding.

• 한국의류학회지
• /
• 제40권1호
• /
• pp.171-187
• /
• 2016

The study performed a comparison analysis of market brand patterns for slim-fit dress shirts and analyzed the body surface development figure of men in their 40s using 3D body scan data and developed slim-fit dress shirt patterns suitable for middle-aged men. The sizes of slim-fit dress shirt patterns showed a slight difference depending on brand. The overlap map of slim-fit dress shirt patterns for brands demonstrates how difference of one-dimensional sizes reflect on two-dimensional patterns. This map provides useful information for pattern design and allows and easy recognition of pattern size differences. A try-on system evaluation through 3D-Simulation allows a grasp of the fitness of neckline and size tolerance of under the arms in front, the silhouette of side lines, and overall fitness in front that also allows analysis of the front/back balance of a shirt in side, the size tolerance proportion in front/back, and the fitness of the arm-hole line. Thus, we obtained try-on results that were equivalent to wearing actual clothing. According to the drafting size suggested in the developed final pattern, the total width was 'C/2+5.5cm', and the front was set at 1cm bigger in the size difference of the front and back. The width of the front neck and the back neck was set identically at 'C/12', while the width of the front neck was set to 'C/12+1.5cm'. For the armhole depth, we added 'C/4+2cm', and '0.5cm and 1.5cm' for the width of the front and back to anthropometry. The results of the try-on evaluation through 3D-Simulation indicated that the fitness of the final slim-fit dress shirt pattern was superior to available slim-fit dress shirt patterns on the market and evaluated as superior to the types for middle-aged men.

• 대한지리학회지
• /
• 제42권3호
• /
• pp.315-331
• /
• 2007

한국 불교 사찰을 대표하는 불국사는 활단층인 불국사(울산)단층선이 통과하는 한반도에서 지반이 가장 불안정한 곳에 입지 한다. 사찰이 조성된 선상지 지형면의 폭이 좁고 경사가 급하므로 건축자들은 불교의 상징세계를 완성하기 위하여 부지의 남쪽과 서쪽을 확장하였다. 인위적으로 넓힌 공간에는 이 지역의 지형적 특성을 고려하여 내진 구조를 고안하여 적용하였다. 건축미를 극대화하면서 중요한 목적인 내진 기능을 작동시키기 위하여 화강암을 목재처럼 가공하거나 자연석과 다듬은 석재를 이용하여 여러 장치들을 고안하였다. 불국사에 적용된 내진 구조는 그렝이법, 목조건축 기법을 적용한 석조구조(결구), 주두석(동틀돌, 첨차석)의 이용, 유공초석의 사용이다. 석축을 구성하고 있는 각 부분들은 나름대로 지진에너지를 흡수하는 특별한 역할을 하면서 전체적으로 균형과 조화를 이루고 있다. 복잡하고 세밀한 내진 구조들을 겉으로 드러내지 않고 석축 안에 감추면서 미학적으로 절정의 건축물을 만든 건축설계는 1250년 전 신라인들의 기술 수준을 짐작하게 한다. 기교에만 치우쳐 지나치게 치장한 것으로도 보일 수 있는 이 건축물의 진정한 미는 과학에 근거한 아름다움을 추구한 것이다.

• 한국전자파학회논문지
• /
• 제13권10호
• /
• pp.1005-1016
• /
• 2002

본 논문에서는 2 GHz 대역에서 하나의 입력과 다수의 출력을 가지는 [10]에서 제시 한 평면 Taper 혈의 전력 분배/결합기의 수정한 구조와 접지평면에 PBG(Photonic Band Cap) 구조를 적용한 형태의 전력 분배/결합 회로를 제안한다. 제안하는 구조의 전기적 특성을 걱정하는 파라메터들을 HFSS 시뮬레이션을 이용하여 분석하였다. 입력 정한 그리고 각 출력 판에서 출력 신호의 균형과 위상의 선형성을 위해 회로의 중앙에 하나의 원형 모양을 에칭 제거하였다. 또 본 논문에서 제안한 구조의 1:2와 1:3 전력 분배 / 결합기와 [10]의 구조와 5-Parameter를 비교ㆍ분석하였다. 결과적으로 본 연구에서 제시하는 수정된 형태를 적용할 경우 기존의 전력 분배/결합기의 반사손실 특성이 2 GHz에서 20 dB 이상 개선되었고. 이에 추가하여 PBG 구조를 적용하면 또 18 dB 이상 개선된 특성을 보였다. 대역폭 또한 증가되는 것을 확인하였다.

• 한국항행학회논문지
• /
• 제6권4호
• /
• pp.279-290
• /
• 2002

본 논문에서는 하나의 입력과 다수의 출력을 가지는 [10]에서 제시한 평면 Taper형의 전력 분배/결합기를 2 GHz 대역에서 수정한 구조를 제안한다. 제안하는 구조의 전기적 특성을 결정하는 파라메터들을 HFSS 시뮬레이션을 이용하여 분석하였다. 입력 정합 그리고 각 출력 단에서 출력 신호의 균형과 위상의 선형성을 위해 회로의 중앙에 하나의 원형 모양을 에칭 제거하였다. 또 본 논문에서 제안한 구조의 1:2와 1:3 전력 분배/결합기와 [10]의 구조와 S-Parameter를 비교 분석하였다. 결과적으로 본 연구에서 제시하는 수정된 형태를 적용할 경우 기존의 전력 분배/결합기의 반사손실 특성이 2 GHz에서 20 dB 이상 개선되었고, 대역폭 또한 증가되는 것을 확인하였다.

• World Technopolis Review
• /
• 제1권4호
• /
• pp.276-286
• /
• 2013

"Federal investments into the future of a region" - pushing economy in the right direction or throwing tax money into a black hole? Hot-headed contentions keep circulating within politics and economy discussing the effect of technology centers and their sustainability within a region. Start-up support and technological infrastructure with the auxiliary service of well developed sector-oriented clusters as a fertile soil for successful networks are an undeniable advantage of well organised technology centers. Sceptic contemporaries still hold against that in order to implement such a center millions of federal funds for infrastructure and operation are invested. What output of this tax money is verifiable in the long run? The case of Dortmund provides substantial food for this necessary and relevant discussion. Now, after 27 years of history of the TechnologieZentrumDortmund, TZDO for short, a positive balance can be drawn. This is not just a matter of personal belief and stance. Fortunately, a recent study on the economic effects of the TZDO on the whole region was performed by the Center of Applied Economy Research M$\ddot{u}$nster, Germany (Gundel and Luttmann 2008). The result is clear and measurable: the TZDO has shown to be of great impact on the positive development of a whole region. This paper presents an account of the approach of the TechnologieZentrumDortmund and its current strategy and mode of operation to reach an utmost of effectiveness of personal and pecuniary input in establishing economic success for the region of Dortmund. An immense change of minds, employment opportunities and a massive structural change of the whole region were some of the ambitious aims that had to be reached and that are achieved to a large extent.

• Smart Structures and Systems
• /
• 제2권2호
• /
• pp.115-126
• /
• 2006

The Terra-Scope system is an affordable 4-D down-hole seismic monitoring system based on independent, microprocessor-controlled sensor Pods. The Pods are nominally 50 mm in diameter, and about 120 mm long. They are expected to cost approximately $6000 each. An internal 16-bit, extremely low power MCU controls all aspects of instrumentation, eight programmable gain amplifiers, and local signal storage. Each Pod measures 3-D acceleration, tilt, azimuth, temperature, and other parametric variables such as pore water pressure and pH. Each Pod communicates over a standard digital bus (RS-485) through a completely web-based GUI interface, and has a power consumption of less than 400 mW. Three-dimensional acceleration is measured by pure digital force-balance MEMS-based accelerometers. These accelerometers have a dynamic range of more than 115 dB and a frequency response from DC to 1000 Hz with a noise floor of less than $30ng_{rms}/{\surd}Hz$. Accelerations above 0.2 g are measured by a second set of MEMS-based accelerometers, giving a full 160 dB dynamic range. This paper describes the system design and the cooperative shared-time scheduler implemented for this project. Restraints accounted for include multiple data streams, integration of multiple free agents, interaction with the asynchronous world, and hardened time stamping of accelerometer data. The prototype of the device is currently undergoing evaluation. The first array will be installed in the spring of 2006.

• 한국항공우주학회지
• /
• 제47권2호
• /
• pp.81-89
• /
• 2019

본 연구는 쿼드 틸트 프로펠러(Quad Tilt Propeller)형상의 탠덤날개 항공기의 전진비행 조건을 풍동실험하여 전방 날개 및 프로펠러가 후방날개에 작용하는 공력 간섭효과를 분석하였다. 6축 밸런스시스템을 이용해 전기체의 힘을 측정하였고 날개뿌리에 부착된 스트레인게이지를 이용하여 각 날개의 굽힘모멘트를 측정하였다. 12홀 프로브를 이용해 날개 및 프로펠러 후류의 유동장을 측정하였으며, 털실과 스모크를 이용한 유동가시화 실험을 통해 유동 특징을 정성적으로 확인하였다. 요소별 공력간섭 현상을 측정하기 위해 프로펠러 부착 조합을 바꿔가며 전방날개와 프로펠러가 후방날개에 작용하는 영향을 분석하였다.

• 한국전자파학회논문지
• /
• 제17권9호
• /
• pp.811-820
• /
• 2006

본 논문에서는 초광대역 CPW(Coplanar Waveguide) 발룬을 제안한다. 제 안된 발룬에는 초광대역을 위한 다단윌킨슨 전력 분배기 구조와 CPW의 "X"-형태의 $180^{\circ}$의 위상차 생성 구조를 갖는다. 또한 CPW 선로에 필요한 접지간 연결을 위하여 bottom-bridge와 via-hole을 사용하는 방법을 제안하여 HMIC(Hybrid Microwave Integrated Circuits) 제작 공정에서 CPW 회로 제작을 편리하게 하였다. 제안된 발룬은 이론적으로 3 또는 10의 초광대역 주파수 대역폭$(=F_{high}/F_{low})$을 갖는데, 윌킨슨 분배기의 초광대역 주파수 특성 과 S-파라미터 특성을 그대로 발룬의 특성으로 전환된다. 제안된 발룬은 $180^{\circ}$ 위상차 생성을 위한 별도의 추가적인 면적을 요구하지 않으므로, 설계의 바탕이 되는 전력 분배기와 같은 크기를 갖는다. 예로써 제작한 3단과 7단 분배기 구조의 발룬은 각각 $1\sim3GHz,\;0.8\sim5GHz$의 주파수 대역에서 우수한 정합 특성, 출력 단자+간 격리 특성, ${\pm}0.5dB$과 ${\pm}0.45dB$의 전력분배 비 에러를 보여주고 있다. 또한 출력 단자간 위상차 에러는 각각 ${\pm}5^{\circ}$와 ${\pm}10^{\circ}$이다.