• Title/Summary/Keyword: Balance block

Search Result 143, Processing Time 0.036 seconds

Numerical Calculation of the Swirling Flow in a Centrifugal Compressor Volute (원심압축기 벌류트 내부의 스월 유동에 관한 수치해석)

  • Seong, Seon-Mo;Kang, Shin-Hyoung;Cho, Kyung-Seok;Kim, Woo-June
    • Proceedings of the KSME Conference
    • /
    • 2007.05b
    • /
    • pp.2603-2608
    • /
    • 2007
  • Flows in the centrifugal compressor volute with circular cross section are numerically investigated. The computational grid for the calculation utilized a multi-block arrangement to form a butterfly grid and flow calculations are performed using commercial CFD software, CFX-TASCflow. The centrifugal compressor of this study has axial diffuser after radial diffuser because of the shape of inlet duct and installation constraints. Due to this feature the swirling flow pattern is different from the other investigations. The flow inside volute is very complex and three dimensional with strong vortex and recirculation through volute tongue. The calculation results show circumferential variations of the swirl and through flow velocity and pressure distribution. The mechanism deciding flow structure is explained by considering the force balance in volute cross section. And static pressure recovery and total pressure loss are estimated from the calculated results and compared with Japikse model.

  • PDF

Application of infinite slope stability analysis method using GIS technique : case study of boeun area (GIS를 이용한 공간자료 적용 및 무한 사면의 안정성 해석 기법 적용 검증 : 보은지역을 중심으로)

  • 이연희;정영국;박혁진;이사로;장범수;전귀현
    • Proceedings of the KSEG Conference
    • /
    • 2003.04a
    • /
    • pp.153-158
    • /
    • 2003
  • Traditionally, the statistical methods has been used to analyze the relationship between landslide occurrence and related factors(soil depth, soil strength, slope angle, vegetation, etc.) in GIS technique. However, the method have no mechanical meaning. Therefore, the mechanical model is suggested in this research. The method analyzes the mechanical equilibrium of a potential slide block and then calculates a slope safety factor. Since this method is able to consider the balance of forces applied to the slope and is a more reasonable method for an individual site. In this research, the spatial data is obtained, managed and analyzed using GIS technique, and the infinite slope model is used to evaluate factor of safety and analyze the slope stability.

  • PDF

Thermodynamic Performance Evaluation of an Integration Design between the Combined-cycle and Air Separation Unit in an IGCC Power Plant (IGCC 발전 플랜트에서 복합발전공정-공기분리장치의 연계에 관한 열역학적 성능 평가)

  • Won, On Nu-ri;Kim, Hyun-jeong;Park, Sung-koo;Na, Jong-moon;Choi, Gyung-min;Kim, Duck-jool
    • 한국연소학회:학술대회논문집
    • /
    • 2012.11a
    • /
    • pp.49-51
    • /
    • 2012
  • In this paper, the integration issue, such as an air-side integration design between the gas turbine and air separation unit, is described and analyzed by the exergy and energy balance of the combined-cycle power block in an IGCC power plant. The results showed that the net power of the system was almost same, but that of the gas turbine was decreased as the integration degree increased. The highest exergy loss was occurred in the combustor of gas turbine, which was affected by the chemical reaction, heat conduction, mass diffusion, and viscous dissipation.

  • PDF

The sensory Characteristics of Rice Extrudate by Addition of Emulsifier(Glycerin Fatty Acid Ester) (亂化劑(Glycerin fatty acid ester)添加에 따른 쌀 壓出 成型物의 官能的 特性)

  • 고광진
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.3 no.1
    • /
    • pp.67-71
    • /
    • 1993
  • This study ws prepared to evaluate sensory characteristics about appearance, color, texture and overall acceptability of rice extrudate with added glycerin fatty acid ester by balance incomplete block design. According to evaluated mean of adjusted treatments, appearance and color were represented maximum value in rice extrudate with added 3.0% and 1.0% glycerin fatty acid ester respectively. Extrudate with added 1.5% emulsifier revealed best texture and overall acceptability among whole treatments. On the results of this research about sensory characteristics, extrudate with added 1.5% glycerin fatty acid ester was considered excellent because of highest score of texture and overall acceptability, and predominent score of appearance and color.

  • PDF

Flame Retardancy & Mechanical Properties of Mixed Waste $Plastic/Mg(OH)_{2}$ Composites Reinforced with PUB Powder (PUB 분말이 충전된 혼합폐플라스틱/$Mg(OH)_{2}$ 복합소재의 난연성 및 기계적 특성)

  • Jung, Ki-Chang;Song, Jong-Hyeok
    • Journal of the Korean Society of Safety
    • /
    • v.21 no.1 s.73
    • /
    • pp.65-71
    • /
    • 2006
  • Flame retardancy and mechanical properties of polyolefinic mixed waste plastics/filler composites were investigated by using inorganic flame retardant(magnesium hydroxide) and PUB(polyurethane block) powder generated from cryogenic insulation process. All composites were obtained by extrusion and after compression molding. The effect of PUB powder on the properties of the composites was studied by tensile and izod impact test, morphology studies and flammability as LOI and UL94 vertical burning test and smoke density. The objective of this work is to obtain good mechanical properties from recycled PP composites with $Mg(OH)_{2}/PUB$ powder as fillers and optimum cost-performance balance, in addition to flame retardant characteristics.

Functional evaluation of orthopedic and orthodontic treatment in a patient with unilateral posterior crossbite and facial asymmetry

  • Kwak, Yoon-Young;Jang, Insan;Choi, Dong-Soon;Cha, Bong-Kuen
    • The korean journal of orthodontics
    • /
    • v.44 no.3
    • /
    • pp.143-153
    • /
    • 2014
  • An 8-years old boy with facial asymmetry and unilateral posterior crossbite on the left side received orthopedic and orthodontic treatment. During the first phase of treatment, the narrow maxillary arch was expanded using an acrylic plate. Then, the acrylic plate was used as a bite block with occlusal indentations from the construction bite that was obtained with the incisors in a coincident dental midline. After the position of the mandible was stabilized, the second phase of orthodontic treatment was initiated using fixed appliances for detailing of the occlusion. Skeletal symmetry, ideal occlusion, and coincident dental midlines were thus achieved. Functionally, occlusal force balance and masticatory muscle activity were improved, and the chewing patterns were normalized.

Transnational Identity and Regional Integration

  • Lamasheva, Yulia
    • Asia-Pacific Journal of Business
    • /
    • v.1 no.1
    • /
    • pp.73-95
    • /
    • 2010
  • European integration is characterized by the development of a transnational European identity, which is considered an integral part of the process. Northeast Asia has no similar projects to address the common identity issue, although cooperation is highly valued there as well. Identity and cooperation both require interdisciplinary approaches combining social psychology, international relations theory and international economics. This article considers the problems of applying existing studies on cooperation and identity as well as the European experience (with the Baltic Sea example) to the case of Northeast Asia. Transnational identities promote cooperation beyond the limits of rationalistic game theory, if countries of the region can define their identities and interests, commit to common goals, create shared discourses and reach a balance between nationalism and internationalism. In view of proposed negotiations on the free trade area between China, Korea and Japan and ongoing discussions about a possibility of introducing a common currency (ACU) it can be crucial to consider the importance of identity building as early as possible, before regional integration meets a stumbling block of egoistic rationality that is a problem in any model of cooperation.

  • PDF

A Comparative Study on the Nutritive Value of Festulolium braunii ( Fstuca pratensis Huds. $\times$ Lolium multiflorum Lam. ) (Festulolium braunii ( Fstuca pratensis Huds. $\times$ Lolium multiflorum Lam. ) 의 사료가치 비교 연구)

  • 이인덕;이형석
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.18 no.2
    • /
    • pp.151-156
    • /
    • 1998
  • This study was conducted to evaluate the forage yield and quality of Fesrulolium bmunii(Festuca prafensis Huds. x Lolium multiflomm Lam.) as a forage sources. The experiment was arranged in a randomized block design with four replications from Sep. 1995 to May 1998 at Chungnam University. Treatments consisted of two forage species, Festulolium bmunii(Pau1ita) and Dactylis glomerc;d4Potomac). The dry matter yields, nutritive value, N and energy balance were observed. The yields of DM, CPDM and DDM per area(ha) were higher for Potomac (P< 0.01) than for Paulita. The content of CP showed no difference between Potomac and Paulita, but NDF, ADF and lignin contents of Paulita were absolutly lower than those of Potomac (P<0.05). The retained N and energy were also high for Paulita compare to for Potomac. It could be suggested that Paulita has higher potential for improvement of the forage quality than Potomac and it have a potential to provide as a forage sources.

  • PDF

A Study on Appropriate Military Strength of Unified Korea (Focused on relative balance strategy and conflict scenario) (통일 한국의 적정 군사력에 관한 연구 - 분쟁 시나리오와 상대적 균형전략을 중심으로 -)

  • Hong, Bong-Gi
    • Journal of National Security and Military Science
    • /
    • s.13
    • /
    • pp.687-738
    • /
    • 2016
  • To prepare for the complicated international relationship regarding Korean Peninsula after reunification, this thesis started off with the awareness that Unified Korea should build its international posture and national security at an early stage by determining its appropriate military strength for independent defense and military strategies that Unified Korea should aim. The main theme of this thesis is 'The research on appropriate military strength of the Unified Korean military'. To derive appropriate military strength of Unified Korea, this research focuses on conflict scenario and relative balance strategy based on potential threats posed by neighboring countries, and this is the part that differentiates this research from other researches. First of all, the main objective of the research is to decide appropriate military strength for Unified Korea to secure defense sufficiency. For this, this research will decide efficient military strategy that Unified Korea should aim. Than by presuming the most possible military conflict scenario, this research will judge the most appropriate military strength for Unified Korea to overcome the dispute. Second, after deciding appropriate military strength, this research will suggest how to operate presumed military strength in each armed force. The result of this thesis is as in the following. First, Unified Korea should aim 'relative balance strategy'. 'Relative balance strategy' is a military strategy which Unified Korea can independently secure defense sufficiency by maintaining relative balance when conflicts occur between neighboring countries. This strategy deters conflicts in advance by relative balance of power in certain time and place. Even if conflict occurs inevitably, this strategy secures initiative. Second, when analyzing neighboring countries interest and strategic environment after unification, the possibility of all-out war will be low in the Korean Peninsula because no other nation wants the Korean Peninsula to be subordinated to one single country. Therefore appropriate military strength of the Unified Korean military would be enough when Unified Korea can achieve relative balance in regional war or limited war. Third, Northeast Asia is a region where economic power and military strength is concentrated. Despite increasing mutual cooperation in the region, conflicts and competition to expand each countries influence is inherent. Japan is constantly enhancing their military strength as they aim for normal statehood. China is modernizing their military strength as they aspire to become global central nation. Russia is also enhancing their military strength in order to hold on to their past glory of Soviet Union as a world power. As a result, both in quality and quantity, the gap between military strength of Unified Korea and each neighboring countries is enlarged at an alarming rate. Especially in the field of air-sea power, arms race is occurring between each nation. Therefore Unified Korea should be equipped with appropriate military strength in order to achieve relative balance with each threats posed by neighboring countries. Fourth, the most possible conflicts between Unified Korea and neighboring countries could be summarized into four, which are Dokdo territorial dispute with Japan, Leodo jurisdictional dispute with China, territorial dispute concerning northern part of the Korea Peninsula with China and disputes regarding marine resources and sea routes with Russia. Based on those conflict scenarios, appropriate military strength for Unified Korea is as in the following. When conflict occurs with Japan regarding Dokdo, Japan is expected to put JMSDF Escort Flotilla 3, one out of four of its Japan Maritime Self-Defense Force Escort Fleet, which is based in Maizuru and JMSDF Maizuru District. To counterbalance this military strength, Unified Korea needs one task fleet, comprised with three task flotilla. In case of jurisdictional conflict with China concerning Leodo, China is expected to dispatch its North Sea fleet, one out of three of its naval fleet, which is in charge of the Yellow Sea. To response to this military action, Unified Korea needs one task fleet, comprised with three task flotilla. In case of territorial dispute concerning northern part of the Korean Peninsula with China, it is estimated that out of seven Military Region troops, China will dispatch two Military Region troops, including three Army Groups from Shenyang Military Region, where it faces boarder with the Korean Peninsula. To handle with this military strength, Unified Korea needs six corps size ground force strength, including three corps of ground forces, two operational reserve corps(maneuver corps), and one strategic reserve corps(maneuver corps). When conflict occurs with Russia regarding marine resources and sea routes, Russia is expected to send a warfare group of a size that includes two destroyers, which is part of the Pacific Fleet. In order to balance this strength, Unified Korea naval power requires one warfare group including two destroyers. Fifth, management direction for the Unified Korean military is as in the following. Regarding the ground force management, it would be most efficient to deploy troops in the border area with china for regional and counter-amphibious defense. For the defense except the border line with china, the most efficient form of force management would be maintaining strategic reserve corps. The naval force should achieve relative balance with neighboring countries when there is maritime dispute and build 'task fleet' which can independently handle long-range maritime mission. Of the three 'task fleet', one task fleet should be deployed at Jeju base to prepare for Dokdo territorial dispute and Leodo jurisdictional dispute. Also in case of regional conflict with china, one task fleet should be positioned at Yellow Sea and for regional conflict with Japan and Russia, one task fleet should be deployed at East Sea. Realistically, Unified Korea cannot possess an air force equal to neither Japan nor China in quantity. Therefore, although Unified Korea's air force might be inferior in quantity, they should possess the systematic level which Japan or China has. For this Unified Korea should build air base in island areas like Jeju Island or Ullenong Island to increase combat radius. Also to block off infiltration of enemy attack plane, air force needs to build and manage air bases near coastal areas. For landing operation forces, Marine Corps should be managed in the size of two divisions. For island defense force, which is in charge of Jeju Island, Ulleung Island, Dokdo Island and five northwestern boarder island defenses, it should be in the size of one brigade. Also for standing international peace keeping operation, it requires one brigade. Therefore Marine Corps should be organized into three divisions. The result of the research yields a few policy implications when building appropriate military strength for Unified Korea. First, Unified Korea requires lower number of ground troops compared to that of current ROK(Republic of Korea) force. Second, air-sea forces should be drastically reinforced. Third, appropriate military strength of the Unified Korean military should be based on current ROK military system. Forth, building appropriate military strength for Unified Korea should start from today, not after reunification. Because of this, South Korea should build a military power that can simultaneously prepare for current North Korea's provocations and future threats from neighboring countries after reunification. The core of this research is to decide appropriate military strength for Unified Korea to realize relative balance that will ensure defense sufficiency from neighboring countries threats. In other words, this research should precisely be aware of threats posed by neighboring countries and decide minimum level of military strength that could realize relative balance in conflict situation. Moreover this research will show the path for building appropriate military strength in each armed force.

  • PDF

A Case of Operational Efficiency Improvement in EPS Motor Manufacturing Process Using IE Technique (IE 기법을 활용한 EPS 모터 제조공정의 운영효율성 향상 사례)

  • Kim, Jung Suop;Lee, Ji Soo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.7
    • /
    • pp.63-72
    • /
    • 2017
  • This paper proposes a procedure to improve the operational efficiency of the automotive parts manufacturing process by applying classical IE techniques composed of process analysis, work method analysis, and motion analysis, and a specific application case is outlined. The proposed procedure was developed originally by the Task Force organized in L company's automotive parts manufacturing business unit. The balance efficiency and production capacity were used as measures of operational efficiency. The developed procedure follows the general procedure of analyzing the phenomenon at the manufacturing shop, deriving an improvement solution to solve the problem, evaluating each derived alternative, and implementing it to the field to achieve productivity improvement. Among the methods used in each phase of the procedure, function analysis used in the waste discovery phase and R&R evaluation method used in the alternative assessment phase are unique techniques developed by L company's TF. The R&R Evaluation method techniques are described in detail because this method is highly applicable and extensible. A case of applying developed procedures to improve the EPS motor manufacturing process is discussed. As a result, the line balance efficiency and production capacity were increased to a satisfactory level.