• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.224-224
• /
• 2012

위성체가 작동하는 우주환경인 고진공상태에서는 위성체의 부품에서 발생 할 수 있는 outgassing으로 인해 위성체가 오염되어 위성체의 성능이 저하될 수 있으며, 특히 이차면경(second surface mirror) 및 광학렌즈 등을 오염시킴으로써 위성체 본연의 임무수행 실패라는 결과를 초래할 수도 있다. 따라서 지상에서 위성체의 부품에 대해 고온($85^{\circ}C$ 이상)과 고진공($5.0{\times}10-3Pa$ 이하)의 상태를 모사하여 오염물질을 제거함으로써 outgassing의 발생을 막고, 아울러 오염근원을 검출할 수 있는 vacuum bake-out 시험이 필수적이라 할 수 있다. 이를 위해서 한국항공우주연구원 위성시험동에는 전용 bake-out 챔버가 설치되어 있으며 저진공용 dry pump와 booster pump를 이용하여 5.0 Pa의 저진공을 형성하고, 2대의 cryopump를 이용하여 $5.0{\times}10-3Pa$ 이하의 고진공을 생성하게 되는데, Bake-out 챔버의 진공 배기시스템에 대하여 자세히 알아보고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1994.06a
• /
• pp.38-38
• /
• 1994

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.291-295
• /
• 2011

A bake-out process using auto switchgear for five days was performed to evaluate the reduction effect of the concentration of volatile organic compounds (VOCs) and formaldehyde in a newly-built elementary school gymnasium. Reduction rates of VOCs were observed as followings: 38.2, 64.2, 86.3, 80.2, and 71.5% for benzene, toluene, ethylbenzene, xylene, and styrene, respectively, which satisfies the indoor air quality standards of newly-built apartment houses in Korea. The reduction rate of total VOCs and formaldehyde were 67.0 and 24.7%, respectively. Those results proved that the bake-out process using auto switchgear was effective for reducing indoor air pollutants.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.702-707
• /
• 2008

Improving quality of life and wellbeing of the residential environment and increased interests and importance is growing confidentiality, insulation, high-rise due to a lack of ventilation and indoor air pollution. Several human diseases caused tremendously due to the indoor air which consists of formaldehyde, radon, pollutants such as volatile substances that is called the phenomenon of a new house syndrome. It has become a world-wide issue that the United States, Japan and several other countries of Europe are showing more interests. Furthermore, a lot of damages caused by the syndrome occurs in the new house should be resolved by somehow is urgent. Thus, this study would like to propose the measures based on the whether condition and the way of heating in korea against a new house syndrome via analysis of indoor contaminant Reduction comparison according to vary ventilation and humidity when operating bake-out on a new apartment.

• Transactions of Materials Processing
• /
• v.15 no.3 s.84
• /
• pp.241-246
• /
• 2006

The isotropic steel sheet was developed and started to apply on the auto-body outer panel, however the characteristics of application on auto-body were not well known. In this paper the FE analysis of outer panel of auto-body was carried out to investigate the characteristics of isotropic steel sheet. For the FE analysis of the roof panel of ULSAB body the isotropic steel sheet and the bake hardening steel sheet were used. The Isotropic steel sheet shows more deformation at punch bottom area of roof panel than the bake hardening steel sheet that is most required forming properties far outer panel to obtain the shape likability of forming parts. It is shown that the isotropic steel sheet has suitable material properties far outer panels of auto-body.

• Journal of the Korean institute of surface engineering
• /
• v.26 no.6
• /
• pp.307-315
• /
• 1993

A study on a new anti-finger printed EGI steel sheet with high corrosion resistance has been carried out to meet the recent requirement of high quality and performance of the pure zinc electrogalvanized steel sheet. The substrate was the pure zinc electrogalvanized sheet with the metallic coating of 20g/$\m^2$. The two differ-ent processes for inorganic(chromating) and organic(resin) coating were applied. One was a two coat/two bake type to separately treat chromating and resin coating which is now widely used. The other was a one coat/one bake type to simultaneously treat them which is newly developed in this study. The solution for the one coat/one bake type was an aqua-base coating agents which was composed of inorganic and organic components. The new anti-finger printed EGI steel sheet with the Cr and resin coating weight of 13mg/$\m^2$ and 800mg/$\m^2$, respectively shows the superior corrosion resistance besides the good paintability, formability fingerprint resistance and earth characteristics properties.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.12
• /
• pp.57-63
• /
• 2018

The purpose of this study was to confirm the effects of flush-out on the reduction of Volatile Organic Compounds(VOCs) concentration in newly built residential buildings. The field measurements were conducted in two complexes of multi-residential buildings which are located suburban areas of Seoul. About three samples of residential buildings were selected in the field measurements. Two samples, B and C, had been flush-out with outdoor air more than seven days. The sample A was maintained at same condition during the flush-out because of the comparison. The indoor concentrations of VOCs in the three samples were measured at three times, before, during, and after flush-out. From the field measurements, it was confirmed that two samples' indoor VOCs' concentrations were considerably decreased after the flush-out comapred with those of the sample A in which the flush-out was not conducted. The decreases of indoor VOCs concentrations were corresponding to about 50% ~ 92% of the concentrations of before. Through the reviews for the previous studies, it was also found that the reduction effects of the flush-out is similar with the those of the bake-out which were reported in the previous studies.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.30-37
• /
• 2006

The present study examined the formaldehyde (HCOH) emission characteristic of various wood-based panel used in interior design, and measured changes in formaldehyde emission when a number of VOC reduction methods were applied. Formaldehyde emission showed a clear tendency of increase with the rise of temperature, and the concentration of formaldehyde emitted changed according to the preprocessing condition before measuring. Formaldehyde emission from wood board after bake out treatment was lower than that of the control group. When specimens were coated with urethane, cashew, water, oil stain, they generally showed the decrease of formaldehyde emission, although varying according to finishing material, and when edge sealing was applied the decrease became significant. $TiO_2$ coating was more effective in decreasing formaldehyde under ultraviolet lamps than under ordinary lamps. When the irradiation of ultraviolet lamps gets longer, formaldehyde emission decreased.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.201-206
• /
• 2003

A residual gas analyzer was used to study the outgassing behavior of stainless steel 304 chamber as a function of bake-out temperature up to $235 ^{\circ}C$ and to identify the gas species evolved during turn on and degassing of the three different types of hot cathode ionization gauges. It was found that $H_2O$, CO, and $H_2O$ were the dominent outgassing species in the vacuum chamber during bake-out but finally $H_2$ and CO(mass 28) persisted at room temperature. Dominant outgassing species were also $H_2$ and $H_2O$ while fuming on the ionizations and then $H_2$,$H_2O$ and CO were found to be the main species degassed gauges. It was appeared that the outgassing species and quantity were not agreed to the three different types of hot cathode ionization gauges.

• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.4
• /
• pp.161-172
• /
• 2020

The tensile property of A5082 and A6060 aluminium wrought alloys was investigated, in terms of the strain rate sensitivity on alloy conditions by heat treatment and bake hardenability on pre-strain prior to strain ageing. The tensile test was carried out in a range of strain rate of 4.17 × 10^-5 s^-1 ~ 4.17 × 10^-5 s^-1 in room temperature and the nominal range of pre-strain was 3.0 ~ 10.5%. The tensile deformation of A5082 alloys is characterized as typical case of dynamic strain ageing with negative strain rate sensitivity for all conditions, and the tensile strength indicates a similar level regardless of alloy conditions, except only in full annealed condition. The stress-relief annealing on A6060 alloys can induce practical decrease in strength level of over approximately 100 MPa without any ductility loss, compared to as-rolled condition, while a full annealed and aged condition leads remarkable strengthening effect with the decrease of tensile elongation. Additionally, the bake hardenability of A5082 alloy by strain ageing indicates a negative dependence upon the increase of pre-strain, while A6060 alloy exhibits a positive sign even in low level relatively compared with conventional SPCC.