• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.224-224
• /
• 2012

위성체가 작동하는 우주환경인 고진공상태에서는 위성체의 부품에서 발생 할 수 있는 outgassing으로 인해 위성체가 오염되어 위성체의 성능이 저하될 수 있으며, 특히 이차면경(second surface mirror) 및 광학렌즈 등을 오염시킴으로써 위성체 본연의 임무수행 실패라는 결과를 초래할 수도 있다. 따라서 지상에서 위성체의 부품에 대해 고온($85^{\circ}C$ 이상)과 고진공($5.0{\times}10-3Pa$ 이하)의 상태를 모사하여 오염물질을 제거함으로써 outgassing의 발생을 막고, 아울러 오염근원을 검출할 수 있는 vacuum bake-out 시험이 필수적이라 할 수 있다. 이를 위해서 한국항공우주연구원 위성시험동에는 전용 bake-out 챔버가 설치되어 있으며 저진공용 dry pump와 booster pump를 이용하여 5.0 Pa의 저진공을 형성하고, 2대의 cryopump를 이용하여 $5.0{\times}10-3Pa$ 이하의 고진공을 생성하게 되는데, Bake-out 챔버의 진공 배기시스템에 대하여 자세히 알아보고자 한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1994년도 제7회 학술발표회 및 한·일 CVD 심포지움 논문개요집
• /
• pp.38-38
• /
• 1994

• 공업화학
• /
• 제22권3호
• /
• pp.291-295
• /
• 2011

초등학교의 신축된 실내체육관을 대상으로 자동 개폐장치를 이용하여 실내의 휘발성유기화합물 및 포름알데히드 농도 저감효과를 평가하기 위하여 5일간 베이크 아웃을 진행하였다. 베이크 아웃을 실시한 결과 베이크 아웃 실시 전의 농도에 비해 벤젠의 경우 38.2%, 톨루엔은 64.2%, 에틸벤젠은 86.3%, 자일렌은 80.2%, 스티렌은 71.5%의 저감률을 보였으며, 환경부의 신축공동주택의 실내공기질 기준치를 만족하는 것으로 나타났다. 총휘발성유기화합물의 저감률은 67.0%이었으며 포름알데히드의 경우 24.7%의 저감률을 보여 자동 개폐장치를 이용한 베이크 아웃이 실내오염물질을 제거하는 데 유용함을 확인하였으며, 자동 베이크 아웃 시스템을 이용할 경우 효과적인 베이크 아웃이 가능함을 확인하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.702-707
• /
• 2008

Improving quality of life and wellbeing of the residential environment and increased interests and importance is growing confidentiality, insulation, high-rise due to a lack of ventilation and indoor air pollution. Several human diseases caused tremendously due to the indoor air which consists of formaldehyde, radon, pollutants such as volatile substances that is called the phenomenon of a new house syndrome. It has become a world-wide issue that the United States, Japan and several other countries of Europe are showing more interests. Furthermore, a lot of damages caused by the syndrome occurs in the new house should be resolved by somehow is urgent. Thus, this study would like to propose the measures based on the whether condition and the way of heating in korea against a new house syndrome via analysis of indoor contaminant Reduction comparison according to vary ventilation and humidity when operating bake-out on a new apartment.

• 소성∙가공
• /
• 제15권3호
• /
• pp.241-246
• /
• 2006

The isotropic steel sheet was developed and started to apply on the auto-body outer panel, however the characteristics of application on auto-body were not well known. In this paper the FE analysis of outer panel of auto-body was carried out to investigate the characteristics of isotropic steel sheet. For the FE analysis of the roof panel of ULSAB body the isotropic steel sheet and the bake hardening steel sheet were used. The Isotropic steel sheet shows more deformation at punch bottom area of roof panel than the bake hardening steel sheet that is most required forming properties far outer panel to obtain the shape likability of forming parts. It is shown that the isotropic steel sheet has suitable material properties far outer panels of auto-body.

• 한국표면공학회지
• /
• 제26권6호
• /
• pp.307-315
• /
• 1993

A study on a new anti-finger printed EGI steel sheet with high corrosion resistance has been carried out to meet the recent requirement of high quality and performance of the pure zinc electrogalvanized steel sheet. The substrate was the pure zinc electrogalvanized sheet with the metallic coating of 20g/$\m^2$. The two differ-ent processes for inorganic(chromating) and organic(resin) coating were applied. One was a two coat/two bake type to separately treat chromating and resin coating which is now widely used. The other was a one coat/one bake type to simultaneously treat them which is newly developed in this study. The solution for the one coat/one bake type was an aqua-base coating agents which was composed of inorganic and organic components. The new anti-finger printed EGI steel sheet with the Cr and resin coating weight of 13mg/$\m^2$ and 800mg/$\m^2$, respectively shows the superior corrosion resistance besides the good paintability, formability fingerprint resistance and earth characteristics properties.

• 대한건축학회논문집:구조계
• /
• 제34권12호
• /
• pp.57-63
• /
• 2018

The purpose of this study was to confirm the effects of flush-out on the reduction of Volatile Organic Compounds(VOCs) concentration in newly built residential buildings. The field measurements were conducted in two complexes of multi-residential buildings which are located suburban areas of Seoul. About three samples of residential buildings were selected in the field measurements. Two samples, B and C, had been flush-out with outdoor air more than seven days. The sample A was maintained at same condition during the flush-out because of the comparison. The indoor concentrations of VOCs in the three samples were measured at three times, before, during, and after flush-out. From the field measurements, it was confirmed that two samples' indoor VOCs' concentrations were considerably decreased after the flush-out comapred with those of the sample A in which the flush-out was not conducted. The decreases of indoor VOCs concentrations were corresponding to about 50% ~ 92% of the concentrations of before. Through the reviews for the previous studies, it was also found that the reduction effects of the flush-out is similar with the those of the bake-out which were reported in the previous studies.

• Journal of the Korean Wood Science and Technology
• /
• 제34권3호
• /
• pp.30-37
• /
• 2006

본 연구는 각종 실내디자인에 이용되는 목질보드의 포름알데히드(HCOH) 방산 특성과 몇 가지 VOC 저감 방법에 대한 포름알데히드의 방산량 변화를 측정하였다. 포름알데히드 방산량은 온도가 증가함에 따라 뚜렷이 증가하는 경향을 보였고, 측정 전 처리조건에 따라 포름알데히드 방산량의 현저한 변화가 나타났다. bake-out 처리후의 목질보드의 포름알데히드 방산량은 대조구와 비교하여 감소함을 나타냈다. 시편에 urethane, cashew, water stain, oil stain coating을 했을 때 각 마감재료에 따라 포름알데히드 방산량의 차이가 확인되었으며, edge sealing 처리 후 두드러진 감소경향이 나타났다. $TiO_2$ coating은 일반광보다는 자외선 램프의 포름알데히드 저감효율이 좋았고, 자외선 램프의 조사시간이 길어지면 포름알데히드의 감소량도 증가하였다.

• 한국진공학회지
• /
• 제12권4호
• /
• pp.201-206
• /
• 2003

스테인레스 스틸 304 재료로 가공된 진공용기의 온도를 $235 ^{\circ}C$까지 올린 후 다시 상온까지 내리는 굽기 과정에서와 세 개의 열음극 전리 진공게이지를 켜거나 탈기체 시켰을 때 이탈하는 기체의 양과 조성을 잔류기체분석기로 측정하여 분석하였다. 굽기 과정에서 이탈된 기체는 주로 $H_2,\; CO,\; H_2O$ 등이었으나 상온에서의 잔류기체는 $H_2$와 CO가 대부분이었다. 게이지를 켜거나 탈가스 시킨 후 용기내의 잔류가스는 $H_2$와 $H_2O$가 대부분이었고 이탈된 기체의 양과 종류는 게이지마다 조금씩 차이가 있음을 알 수 있었다.

• 열처리공학회지
• /
• 제33권4호
• /
• pp.161-172
• /
• 2020

The tensile property of A5082 and A6060 aluminium wrought alloys was investigated, in terms of the strain rate sensitivity on alloy conditions by heat treatment and bake hardenability on pre-strain prior to strain ageing. The tensile test was carried out in a range of strain rate of 4.17 × 10^-5 s^-1 ~ 4.17 × 10^-5 s^-1 in room temperature and the nominal range of pre-strain was 3.0 ~ 10.5%. The tensile deformation of A5082 alloys is characterized as typical case of dynamic strain ageing with negative strain rate sensitivity for all conditions, and the tensile strength indicates a similar level regardless of alloy conditions, except only in full annealed condition. The stress-relief annealing on A6060 alloys can induce practical decrease in strength level of over approximately 100 MPa without any ductility loss, compared to as-rolled condition, while a full annealed and aged condition leads remarkable strengthening effect with the decrease of tensile elongation. Additionally, the bake hardenability of A5082 alloy by strain ageing indicates a negative dependence upon the increase of pre-strain, while A6060 alloy exhibits a positive sign even in low level relatively compared with conventional SPCC.