• Macromolecular Research
• /
• v.17 no.7
• /
• pp.516-521
• /
• 2009

Techflex$^{(R)}$, a polypropylene-lined, multilayer infusion bag, was studied for its compatibility with diazepam, in comparison to the conventional infusion bag, Safeflex$^{(R)}$, which is comprised of poly(vinyl chloride) (PVC). Diazepam was diluted in 0.9% sodium chloride isotonic solution and stored in the infusion bags for 24 h. To evaluate the sorption of diazepam into the infusion bags during storage, the concentration of the drug remaining in the bag was measured using gas chromatography-mass spectroscopy. The PVC bags exhibited a marked sorption of diazepam, with a drug loss reaching up to 90% of the initial concentration after 24 h of contact, whereas Techflex$^{(R)}$ inhibited the drug sorption, showing approximately 10%, under the same conditions. The differences in the sorption behaviors of the bags are discussed in terms of solubility parameters and crystallinities of the polymers.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.01a
• /
• pp.41-43
• /
• 2012

Today many people are greatly interested in the environment. Especially increasing affluent of food causes a great amount of food waste. To handle this effectively, we now have a lot of problems of disposing garbage all over the world. In Korea, in order to reduce this garbage, we should use a standard plastic garbage bag in which we have to throw away our garbage. So it has an effect on significantly reducing the waste amount every year. Now, there are a lot of cases that residents again use a standard plastic garbage bag. The purpose of this study is to propose algorithm preventing the re-cycling of a standard plastic garbage bag.

• The Korean Journal of Ecology
• /
• v.26 no.4
• /
• pp.203-208
• /
• 2003

Losses in the dry weight of leaf litter from six tree species were studied during 16 months on the forest floor in temperate deciduous forest of Mt. Cheonma in the vicinity of Seoul in Korea by using litter bag method. The decomposition rate of each leaf litter varies with each species. After 16 months elapsed, the leaf litter of Acer pseudo-sieboidianum showed the highest decomposition constant (0.82) as Olson´s decomposition constant, while that of Pinus densiflora showed the lowest decomposition constant (0.33). The decomposition constant of Quercus mongolica, Q. serrata, Betula ermani and Carpinus laxiflora showed 0.43, 0.37, 0.66 and 0.75, respectively. The decomposition constant of leaf litter was considered with temperature and precipitation which accumulated daily during each term of litter bag collection. The decomposition constant of leaf litter showed closely positive correlation with daily accumulative temperature and precipitation. The relationships between decomposition constant and the daily accumulative temperature and precipitation at each period of litter bag collection were analyzed through multi-regression analysis. The correlation coefficients as a result of multi-regression analysis in Q. mongolica, Q. serrata, P densiflora, B. ermani, C. laxiflorais and A. pseudo-sieboldianum were 0.83, 0.81, 0.69, 0.77, 0.77 and 0.62, respectively. The precipitation showed higher effect, about 10 times, on the leaf litter decomposition than the daily accumulative temperature.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.105-110
• /
• 2020

In this study, two hats and a laptop bag were developed and produced as cultural products by using Hanji-fabrics dyed with various natural dyeing materials. First of all, for the cultural product development, I selected Hanji-fabric which made with traditional Korean paper with excellent durability and functionality. Secondly, it was dyed blue with indigo, brown with green persimmon juice, red by safflower, yellow by amur cork and purple by gromwell root. Third, two hats and a laptop bag were designed. Fourth, according to the designs, patterns of two hats and a laptop bag were made. And then two hats and a laptop bag were finished by cutting and sewing Hanji-fabrics dyed in various colors.

• Journal of Environmental Science International
• /
• v.29 no.5
• /
• pp.457-468
• /
• 2020

With continuous industrial development, the types, and amount of particulate matter (PM) have been increasing. Since 2018, environmental standards regarding PM have become more stringent. Pulse air jet bag filters are suitable for PM under the 20 ㎛ and, can function regardless of size, concentration and type. Filtration velocity and shape are important factors in the operation and design of the pulse air jet bag filters however, few established studies support this theory. In this research, numerical simulations were conducted based on experimental values and, several methods were employed for minimizing the pressure drop. In the pilot system, as the inlet duct velocity was faster than 19 m/sec, flow was not distributed equally and, re-entrainment occurred due to the hopper directional vortex. The multi-inlet system decelerated the hopper directional vortex by 25 ~ 30%, thereby decreasing total pressure drop by 6.6 ~ 14.7%. The guide vane system blocked the hopper directional vortex, which resulted optimal vane angle of 53°. The total pressure of the guide vane system increased by 0.5 ~ 3% at 1.5 m/min conditions. However, the filtration pressure drop decreased by 4.8 ~ 12.3% in all conditions, thereby reducing the operating cost of filter bags.

• Journal of Sensor Science and Technology
• /
• v.19 no.4
• /
• pp.271-277
• /
• 2010

Intravenous(IV) drip therapy is extensively used for all kinds of treatments. It works by delivering medicine directly into the vein. When the medicine has been fully dispensed, a dangerous situation occurs since air in the IV drip bag could enter the patient's vein, which is hazardous to the patient’s safety. In this paper, using capacitive sensors to detect the residual quantity of a plastic IV drip pack is proposed. A simulation model of this technology was shown by a finite elements analysis(FEA) program to find out its feasibility and analyze the proper geometrical dimension of a capacitive sensor. According to the FEA simulation, 3 kinds of capacitive sensors were attached to the bottom surface of the plastic IV drip bag to detect the residual quantity in the experiment. Experimental data showed an agreement with the FEA simulation model estimation and confirmed that the sensor works.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.2
• /
• pp.133-138
• /
• 1991

Several quality indices of Shiitake mushroom (Lentinus edodes) were measured during storage at modified atmosphere (MA) conditions made by plyethylene film bag with different thicknes. IN the mushrooms kept in the thicker film bag, larger amounts of ethyl alcohol and acetaldehyde were produced during storage. The lowest weight loss was marked by the mushrooms kept in 0.06mm thick film bag. Protein content of the mushrooms was increased with the storage period without any storage period without any significant trend depended on the storage treatments and electrophoresis pattern of protein was changed little in the mushrooms kept in 0.04mm thick P.E. film bag during storage.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.51-61
• /
• 1993

The hydrodynamic problem when the pressurized bag submerges partially into water and oscillates was formulated by Lee(1992), and the solution method was given. In his formulation, however, the compressibility of air was neglected and the pressure inside the bag was assumed to be constant. In this paper, the formulation was done including the air compressibility and the wall to block fling around phenomenon. The compression process was assumed to be a isothermal process for a static problem, isentropic process for a dynamic problem. And the stability was analyzed for the static problem. Through the various numerical calculations, the forces and the shape of the bag were compared with those of a rigid body case, constant pressure case, and variable pressure case.

• Journal of Mushroom
• /
• v.14 no.2
• /
• pp.34-38
• /
• 2016

This study was performed to determine most appropriate mixed ratio of brewers dried grain to wheat bran as a nutrient supplement in the plastic vinyl bag cultivation of Grifola frondosa. In the examination of an appropriate nutrient source, the IV substrate formulation (80 : 10 : 10, oak sawdust : wheat bran : brewers dried grain) resulted in 71.6 days to harvest and the highest yield of 142.6 g/bag. On the other hand, the investigation of the optimal mixing ratio of beer waste to wheat bran showed that the III substrate formulation (80 : 5 : 15, oak sawdust : wheat bran : brewers dried grain) resulted in the least days to harvest (61.8 days), with the highest yield of 140.8 g/bag.

• Current Research on Agriculture and Life Sciences
• /
• v.33 no.2
• /
• pp.37-40
• /
• 2015

Poria cocos is an edible and pharmaceutical mushroom with a long history of medicinal use in Korea. For the last 30 years, the domestic cultivated supply of Poria cocos has been unable to meet consumer demand, so Poria cocos is collected in mountainous areas and also imported from China. Thus, to increase the supply of Poria cocos, many artificial cultivation methods have been studied. In this study, Poria cocos is cultivated under different environmental conditions using plastic bags and the results compared. When cultivating Poria cocos at different temperatures (20, 25, 30 and $35^{\circ}C$) and using different numbers of plastic bag layers (1, 2), the most efficient cultivation conditions were a temperature of $25-30^{\circ}C$ and 2 plastic bag layers. The fastest growth was at $25-30^{\circ}C$, and the Poria cocos exhibited no weight change when cultivated using layers of plastic bags (1, 2).