• Korean Journal of Environmental Biology
• /
• v.31 no.2
• /
• pp.96-104
• /
• 2013

The objectives of this study were to analyze chemical the water quality related to the fish community and to evaluate the ecosystem health based on the faunal composition and guild structure in 2007 in Baekma River. Mean concentrations of biological oxygen demand (BOD) and chemical oxygen demand (COD) were 2.8 and $4.0mg\;L^{-1}$, respectively and total nitrogen (TN) and total phosphorus (TP) were $5.0mg\;L^{-1}$ and $158{\mu}g\;L^{-1}$, which is indicating that the river is in an eutrophic state. Especially, organic pollution and eutrophication occurred in the downstream reach of Baekma River. A total of 19 fish species were collected during the study and the most dominant species was Opsariichthys uncirostris amurensis accounted 48% of the total abundances. The proportion of sensitive species was low (2.3%), compared with that of tolerant species (71.8%). These results suggest that tolerant species and the biotic quality of the fish community was severely degraded. According to the multi-metric model, the Index of Biological Integrity (IBI), the mean model value of the fish community in Baekma River was estimated as 14.8 indicating a "poor" condition. The minimum values of the IBI were observed in the downstreams, and this was mainly attributed to chemical pollutions of nutrients (N, P) and organic matters.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1C
• /
• pp.11-17
• /
• 2011

This study was performed a series of the isotropic compression-expansion tests and the drained triaxial tests with various the relative densities 25%, 50%, 80% and 100% for Baekma river sand. Using the tests results the characteristic of the parameters of Lade's single hardening constitutive model were investigated. The soil parameters Kur and n representing elastic behavior are not much affected by the change of the relative density. The other parameters such as failure criterion (m, ${\eta}_1$), hardening function (C, p) and plastic potential (${\Psi}_2$, ${\mu}$) are in a positive linear relationship with the relative density. Since the soil parameters h and $\alpha$ representing yield function do not change much to the change of relative density and also closely related to failure criterion, they can be replaced by failure criterion ${\eta}_1$. We also observed that predicted values from the Lade's single hardening constitutive model were well consistent with the observed data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.177-189
• /
• 1992

This paper aims at developing a finite element program to predict undrained behavior of granular soil by using elasto-plastic constitutive model. A computer program developed by authors based on Christian's techniques for undrained behaviour of the soil has been employed coupled with Lade's single work-hardening model. Modification of the program for drained behaviour, considering restraint of volumetric strain, makes it possible to analize the underained behaviour. To validate the newly developed program, comparison of results was performed between numerical values and experimental data for Baekma river sand as well as Sacrmento river sand studied by Seed and Lee. The program is evaluated to have high accuracy.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.2
• /
• pp.133-144
• /
• 1996

To get accurate results, the realistic stress-strain relationships of soils are dependent on a number of factors such as soil types, density, stress levels and stress path. Such attempts are continuously being made by the developement of analytical models for soils incorporating all such factors. Isotropic compression-expansion test and a series of drained conventional triaxial tests with several stress path for Baekma river sand were performed to investigate parameters characteristics of Lade's single work hardening model dependant on the stress path. Using the computer program based on the regression analysis, the values of parameters for the model were determined. In conclusion, the parameters of Lade's model are little influenced by the stress paths. Though yield criterion parameters ( h, ${\alpha}$a) are much influenced by stress level and stress path, the parameters don't have influence on stress-strain behavior.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.2
• /
• pp.64-72
• /
• 1995

A series of cubical triaxial tests with three independent principal stresses was per- formed on Baekma river sand( # 40~100). It was found that the major principal strain at failure remained approximately constant for b values larger than about 0.3 for both the drained and undrained condition, and thereafter increased as b value decreased. The test results showed that the direction of the strain increment at failure form acute angles with the failure surfaces for both the drained and undrained condition. The results were thus not in agreement with the normality condition from classic plasticity theory. Howev- er, it was found that the projections of the plastic strain increment vectors on the octahe- dral plane were perpendicular to the failure surface in that plane. Failure strength in terms of effective stress anlaysis was greatly influenced by the variation of intermediate principal stress and so was failure criterion. The effective stress failure surfaces for both the drained and undrained condition were estimated quite well by use of Lade's failure criterion.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.1
• /
• pp.93-101
• /
• 2020

In order to predict the nonlinear behaviour of the soil, the elasto-plastic hyperbolic model was selected, which was considered to be relatively simple and highly predictable. The soil parameter determination and the behavior analysis program were developed by formalizing the functions related to the constitutive model. Each soil parameter was determined from the results of the drained triaxial compression tests of Baekma river sand with the change of relative density. The stress-strain behavior was predicted using the soil parameters determined under each condition. As a result, the deviator stress for the axial strain is verified to have a good match between the measured value and predicted value at each relative density. In the relationship between the volumetric stain and the axial strain, when the relative density is loose, the measured value and predicted value tend to match, and when relative density is dense, the predicted value of the volumetric strain appears somewhat smaller than the measured value due to the limitation of the constitutive model.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.3
• /
• pp.70-81
• /
• 1996

Solutions of geotechnical engineering problems require predictions of deformation and stresses during various stages of loading. Powerful numerical methods are available to make such predictions even for complicated problems. To get accurate results, realistic stress-strain relationships of soils are dependent on a number of factors such as soil type, density, stress level and stress path. Attempts are continuously being made to develope analytical models for soils incorporating all such factors. Isotropic compression-expansion test and a series of drained conventional triaxial tests with several stress path for Baekma river sand were performed to investigate stress-strain and volume change characteristics of Lade's single work hardening model dependant on the stress path. In order to predicted of stress-strain and volumetric strain behavior were determined the values of parameters for the mode by the computer program based on the regression analysis. Predicted stress-strain behavior of triaxial compression tests and optional stress path tests for increasing confining pressure with parameters obtained conventional triaxial compression tests agreed with several test results but the prediction results for decreasing confining pressure reduced triaxial compression tests make a little difference with test results.

• Geotechnical Engineering
• /
• v.8 no.2
• /
• pp.81-96
• /
• 1992

This paper dealt with the influence of experimental error generated inevitably during performing experiments on the granular soil behaviour analysis selecting Lade's Single Work-Hardening constitutive model. Several isotropic compression-expansion tests and a series of drained conventional triaxial tests with various confining pressures for Baekma river sands were performed and the values of parameters for the above model were determined using computer program developed for this study based on regression analysis. By finding the range of the upper and lower bound for deviator stress and volumetric strain versus axial strain dependant on the increase and decrease of the standard deviation from mean value of parameters, sensitivities of all the parameters were examined. Practical use of program to determine the parameters and capability to predict the behaviour of granular soil by Lade's Single Work -Hardening model verified.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.395-400
• /
• 2012

The stress-strain relationship of soil is dependent on a number of factors such as soil type, density, stress level and stress path. Th accurate stress-stain relationship can be predict using a constitutive model incorporated all influencing factors. In this study, an isotropic compression-expansion test and a series of drained conventional triaxial tests with several stress paths were performed on Baekma river sand to investigate parameters characteristics of Lade's single work hardening model depending on the stress path.. Based on test results, the parameters of yield function (h, ${\alpha}$) are not much influenced by stress level and stress path, the these parameters do affect a little bit of stress-strain behavior. The parameters h and ${\alpha}$ are closely related to failure criterion ${\eta}_1$, they can be replaced by failure criterion parament. We also observed that predicted values from the Lade's single hardening constitutive model are well matched with the observed data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.253-265
• /
• 1993

This paper presents a numerical method for implementing a nonlinear constitutive material model developed by Lade, into a finite element computer program. The techniques used are based on the displacement method for the solution of axial symmetric and plane strain nonlinear boundary value problems. Laboratory behaviour of Baekma river sand(#40-60) is used to illustrate the determination of the parameters and verification of the model. Computer procedure is developed to determine the material parameters for the nonlinear model from the raw laboratory test data. The model is verified by comparing its predictions with observed data used for the determination of the parameters and then with observed data not used for the determination. Three categories of tests are carried out in the back-prediction exercise; (1) A hydrostatic test including loading and unloading response, (2) Conventional triaxial drained compression tests at three different confining pressure and (3) A model strip footing test not including in the evaluation of material parameters. Pertinent observations are discussed based on the comparison of predicted response and experimental data.