• 대한예방의학회:학술대회논문집
• /
• 1997.10b
• /
• pp.251-252
• /
• 1997

• Proceedings of the Korean Society of Veterinary Clinics Conference
• /
• 2006.05a
• /
• pp.119-119
• /
• 2006

• 한국가스학회:학술대회논문집
• /
• 2001.10a
• /
• pp.231-239
• /
• 2001

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.125-126
• /
• 2015

본 논문에서는 전류형 HVDC Thyristor Valve 의 연속운전 시험을 위한 개선된 방식의 합성시험회로를 제안한다. 제안하는 방식은 기존의 저전압 대전류원 회로에 단상 풀-브리지 인버터를 적용하여 회로를 간소화 하였고, 이전보다 간단한 방법으로 보조 사이리스터 밸브를 턴-오프 한다. 제안하는 방식에 대한 구간별 동작 원리를 설명하고, 타당성을 검증하기 위해 시뮬레이션 분석과 축소모형 실험을 실시하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.332-335
• /
• 2006

전극 전해질 복합체가 하나로 구성된 단위전지는 전기출력이 낮아 원하는 전기출력을 얻기 위하여 단위전지를 여러 장 직렬로 쌓아 스택을 구성하여야 한다. 본 연구에서는 400W급 직접메탄을 연료전지 스택을 제조하여, 운전 조건의 최적화를 위한 실험을 수행하였고, 한국형 휴머노이드 로봇인 Hubo에 적용하여 그 동특성을 평가하였다. 0.8M 메탄을 용액은 260 ml/min의 유량을, 공기는 42LPM을 스택에 주입하여 400W의 성능을 나타내었다. 연료전지 스택의 온도와 전압의 편차는 작았으며 정상 운전시스템의 온도는 약 $70^{\circ}C$를 유지하였다. 로봇의 필요 전력이 높을 경우, 배터리와 연료전지가 동시에 부하 변동에 대응하였다 방전된 배터리는 로봇의 필요 전력이 낮아질 경우, 충전되어 이후의 방전 상황에 대비하였다. 연료전지 시스템 적용 결과 로봇의 성공적인 운전을 확인할 수 있었다.

• 한국가스학회:학술대회논문집
• /
• 2005.10a
• /
• pp.111-116
• /
• 2005

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.185-186
• /
• 2010

For Mega foundation, concrete must have high strength and high flowability. Especially in marine environment, concrete durability becomes a significant property. In this study, high durable concrete, under marine environment, was developed. And to estimate its performance, the world's biggest Mock Up test, $4m{\times}4m{\times}4m$ size, was performed.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.198-201
• /
• 2012

The electrolytes in thermal batteries are nonconductive solids at ambient temperature, which prevent the self-discharge and corrosion. To meet severe environmental requirements and guarantee acceptable handling yields, all the pellets in cells should have adequate strength, especially for the cathodes due to their poor binding properties among FeS2 particles. By modifying the surface microstructure of FeS2 through molten-salt heat treatment, the inter-particle binding strength is greatly increased, resulting in the enhanced pellet strength and yield. The addition of Li2O also promoted the soft salt coating coverage of hard FeS2 particles, which can be explained by the enhanced wettability of the molten salt.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.677-682
• /
• 2001

Catalytic combustion is the environmental-friendly technology, which has been applied to a variety of areas for industrial and domestic use in recent years. Accordingly, this study performed the development of the catalytic manufacturing technology for the high temperature and of the catalytic combustor in priority, which were aimed to be applied to a commercialized boiler. Paliadium(Pd) of a noble metal was used as a catalyst for the high temperature and supported on alumina($Al_[2}O_{3}$) and zirconia($ZrO_{2}$) in constant weight ratio. Activity of Pd catalysts is compared and analyzed in the catalytic combustion of natural gas. The ratio of $Pd/Al_{2}O_{3}=4$ was found to be better than any other weight ratios in activity and durability. The performance examination of catalysts and of combustion through the plate-type combustor made it possible to be developed the cylindrical-type combustor which has increased combustion area. Catalytic combustion boiler of 25,000 kcal/hr class was also developed, which had the optimum combustion condition at the nozzle of 5.95mm and the orifice of 21mm. This condition was determined through the performance experiments of catalytic combustion boiler to which the cylindrical-type catalytic combustor was applied.

• Journal of Environmental Science International
• /
• v.17 no.3
• /
• pp.325-334
• /
• 2008

The feasibility of the automation of upper-air sounding is examined by using recent 3-year$(2002\sim2004)$ observation data from Autosonde at Haenam, Korea. The Autosonde has been successfully operated since 2002 in order to produce an intensive observation data at high-impact weather events for research purpose. It is found from the analysis of recent 3 years' operation data of the system that the system could be capable of making a stable observation when strong wind greater than 20 m/s was recorded under the influence of typhoons Rusa in 2002 and Maemi in 2003. It might be concluded that there is some possibility in automating upper-air sounding for operational purpose through the reduction of operator's payment and operating cost for upper-air sounding.