• Journal of Oral Medicine and Pain
• /
• 제26권4호
• /
• pp.309-318
• /
• 2001

The purposes of the study were (1) to evaluate the olfactory identification ability in those who have bad breath, (2) to determine the olfactory detection threshold for methyl mercaptan in normal subjects and those who have bad breath, and (3) to evaluate the effect of oral hygiene care on the olfactory detection threshold for methyl mercaptan. Sixteen male subjects with bad breath (male odor group), 9 male subjects without bad breath (male non-odor group), and 10 female subjects without bad breath (female non-odor group) were included for the study. Olfactory identification ability was assessed by administrating the Cross-Cultural Smell Identification Test (CC-SIT), and the olfactory detection threshold for methyl mercaptan was measured by two-alternative forced-choice single-staircase detection threshold procedure in a double-blinded condition. The geometric mean of the last four staircase reversal points of a total of seven reversals is used as the threshold. For the male odor group, after 1 month of intensive oral hygiene care for reducing oral volatile sulfur compounds (VSC) concentration, the olfactory detection threshold for methyl mercaptan was measured again and compared to the initial value. The ANOVA was used to test the group difference of olfactory threshold and olfactory identification ability and the paired t-test was used to test the difference of olfactory threshold between before and after reduction of oral VSC in male odor group. The results were as follows : 1. There was no significant difference in olfactory identification ability among those who have bad breath and normal male or female subjects. 2. The olfactory detection threshold for methyl mercaptan was about 8.4 ppb in normal male and female. 3. There was a tendency that male subjects with bad breath showed a higher olfactory detection threshold for methyl mercaptan when compared to those of no bad breath. 4. The olfactory detection threshold for methyl mercaptan returned to a normal level after 1 month of intensive oral hygiene care for reducing oral VSC.

• 미생물학회지
• /
• 제51권3호
• /
• pp.199-208
• /
• 2015

소의 혈액, 세포, 조직, 기관 등이 생물의약품, 조직공학제제, 세포치료제, 의료기기의 원재료로 널리 사용되고 있다. 소유래 성분 원재료에 다양한 바이러스가 오염된 사례가 있기 때문에 소유래 물질을 원재료로 사용한 제제의 바이러스 안전성 검증이 필수적으로 요구된다. Bovine adenovirus type 1(BAdV-1)은 소에게 가장 흔하게 감염되는 바이러스 중의 하나이다. 소유래 물질을 원재료로 하는 생물의약품, 조직공학제제, 세포치료제, 의료기기 등에서 BAdV-1 안전성을 확보하기 위해, 세포주, 원재료, 제조공정, 완제품에서 BAdV-1을 정량적으로 검출하고, 제조공정에서 BAdV-1 제거 검증을 위한 시험법으로 활용이 가능한 TaqMan probe real-time PCR 시험법을 확립하였다. 세포배양법에 의한 감염역가와 비교한 결과, real-time PCR 검출한계는 $7.44{\times}10^1\;TCID_{50}/ml$이었다. 확립 된 시험법의 신뢰성(reliability)을 보증하기 위해 시험법 검증을 실시한 결과, 특이성(specificity)과 재현성(reproducibility), 완건성(robustness)이 우수함을 확인하였다. 확립된 real-time PCR을 생물의약품 제조공정 검증에 적용할 수 있는지 확인한 결과, 인위적으로 BAdV-1을 오염시킨 Chinese Hamster Ovary(CHO) 세포주에서 BAdV-1를 정량적으로 검출할 수 있었다. 확립된 시험법을 항체의약품 생산용 CHO 마스터 세포주와 소유래 type 1 collagen에서 BAdV-1 검출 시험에 산업적으로 적용하였다. 위와 같은 결과에서 확립된 BAdV-1 real-time PCR 시험법은 감염역가 시험법과 같은 생물학적 시험법을 대신할 수 있는 신속하고, 특이성과 민감성이 우수한 시험법임을 확인하였다.

• 대한전기학회논문지
• /
• 제35권7호
• /
• pp.261-271
• /
• 1986

This paper describes a method for the state estimation considering current measurement component and detection of the bad data. The state values are estimated by weighted least square method in which measurement vector included bus injection current and line current. The bad data are detected using standardized variable of normal distribution and identified using sensitivity coefficients. When the bad data were occured by the bad measurement values. The results of the application to the model power system reveal the effectiveness of the presented algorithms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.239-243
• /
• 1990

This paper presents a algorithm to improve accuracy and reliability in state estimation of contaminated bad data. The conventional algorithms for detection of bad data confront the problems of excessive memory requirements and long computation time. In order to overcome measurement compensation approach is proposed to reduce computation time and partitioned measurement error model has the advantage of remarkable reduction in computation time and memory requirements in estimated error computation. The proposed algorithm has been tested for IEEE sample systems, which shows its applicability to on-line power systems.

• 대한전기학회논문지
• /
• 제40권2호
• /
• pp.144-153
• /
• 1991

This paper presents an algorithm to improve accuracy and reliability in the state estimation of contaminated bad data. The conventional algorithms for detection of bad data have the problems of excessive memory requirements and long computation time. In order to overcome these problems, a measurement compensation approach is proposed to reduce computation time, and the partitioned measurement error model has the advantage of remarkable reduction in computation time and memory requirements in estimated error computation. The proposed algorithm has been tested for IEEE sample systems, which shows its applicability to on-line power systems.

• 대한전기학회논문지
• /
• 제43권6호
• /
• pp.877-884
• /
• 1994

In the power system state estimation, the J(x)-index test and normalized residuals ${\gamma}$S1NT have been the presence of bad measurements and identify their location. But, these methods require the complete re-estimation of system states whenever bad data is identified. This paper presents back-propagation neural network medel using autoregressive filter for identification of bad measurements. The performances of neural network method are compared with those of conventional mehtods and simulation results show the geed performance in the bad data identification based on the neural network under sample power system.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2016년도 제54차 하계학술대회논문집 24권2호
• /
• pp.93-94
• /
• 2016

사용자가 편리하게 사용하는 USB 인터페이스를 지원하는 컨트롤러 내부에 저장된 펌웨어를 조작하여 악의적인 행위를 수행하는 BAD USB가 출현하였다. BAD USB의 경우에는 악의적인 코드가 호스트에 존재하는 것이 아니라 장치 내부의 펌웨어에 존재하기 때문에 현재의 안티 바이러스 제품이 탐지하지 못하므로 그 대응방안이 시급하다. 이에 BAD USB를 탐지하고 대응하기 위한 연구가 활발히 진행되는 추세이지만, 아직 해결책으로는 미비한 실정이다. 따라서 본 논문에서는 사용자 인지를 기반으로 BAD USB를 탐지하는 방안을 제안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.270_271
• /
• 2009

The identification of multiple bad data, especially when mutually interacting, may be difficult to handle, since the well known procedures based on the normalized or weighted residuals may become faulty. In such a case, successive elimination of the measurement with the largest normalized residual may result in the suppression of correct measurements instead of the bad data. Then the problem of identifying bad data is considered as a combinatorial decision procedure. In this paper, binary PSO is used for the identification of multiple bad data in the power system state estimation. The proposed binary PSO based procedures behave satisfactorily in the identifying multiple bad data. The test is carried out with reference to the IEEE-14 bus system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.665-668
• /
• 2000

This paper presents development of a different substance monitoring system base reliable detection between the conveyer belt and hopper used lot materials transport line of steel company. Conventional detection method of a piece of iron separation system is losed the confidence, because of the place with bad surroundings of measurement so much that materials Production line are completely exposed to dust, moisture and vibration. For the solution of this problem, we developed a different substance detection system using the acoustic emittion sensor and one chip microprocessor which is available for bad surroundings and inexpensive. The reliability of the system was estimated by experiment.

• 한국정보통신학회논문지
• /
• 제4권4호
• /
• pp.803-808
• /
• 2000

This paper presents development of a different substance monitoring system base reliable detection between the conveyer belt and hopper used for materials transport line of steel company. Conventional detection method of a piece of iron separation system is losed the confidence, because of the place with bad surroundings of measurement so much that materials production line are completely exposed to dust, moisture and vibration. For the solution of this problem, we developed a different substance detection system using the acoustic emittion sensor and one chip microprocessor which is available for bad surroundings and inexpensive. The reliability of the system was estimated by experiment.