• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.92-98
• /
• 2003

A wind turbine monitoring system is essential equipment fur the performance evaluation and mechanical load analysis of a wind turbine. A monitoring system using LabVIEW is developed in this study. This system monitors signals from a meteorological mast, wind turbine generator, and tower. The discrete signals which are sampled at t Hz are automatically saved on a data file in the unit of a day. Besides these basic functions, the developed monitoring system has the other several capabilities. One of them is the information access from a remote PC through the internet. A vision image of the test site area and data files that are produced by LabVIBW software can be uploaded to the main computer located in a remote site. An emergency backup system using UPS fur the power loss on the monitoring HW is also prepared, A detail explanation for the developed wind turbine monitoring system is presented in this study.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.67-70
• /
• 2006

KARI is developing Image Data Acquisition and Control System (IDACS) for pre-processing meteorological and ocean data acquired on geostationary orbit. This paper describes the functions and architecture of IDACS and gives its operation policy including backup operation to overcome limitation of single-configured antenna system. The COMS IDACS provides the capability to receive the raw sensor data and disseminate processed MI data to users via a satellite. From the processed image data, users can produce a set of meteorological and ocean products for a wide range of applications. Most of IDACS subsystems are being developed by Korean technologies and experience acquired from previous projects. In case of COMS geometric correction software module, as it is closely dependent on the characteristics of imagers and spacecraft bus system, it is being co-developed with overseas prime contractor who develops spacecraft bus system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.269-271
• /
• 2004

In this study, on-line measuring system were developed to verify performances and characteristics of electric braking system that is used in KTX(Korea Train eXpress) synthetically and efficiently Because KTX is commercial vehicle, effective measurement and evaluation of measuring signals were performed beyond the range of change for equipment components. KRRI(Korea Railroad Research Institute) described about running-braking measuring program, running-braking backup program and running-braking analysis program that were developed using a software called LabVIEW in this paper. Also, we analyzed the characteristics comparing experimental values with design values about braking distance, braking time, negative acceleration and braking effort in rheostatic braking and regenerative braking. In result, main performances and characteristics for electric braking system in KTX were verified.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.88-88
• /
• 2000

As more and more critical commercial applications move on the Internet, providing highly available servers becomes increasingly important. One of the advantages of a clustered system is that it has hardware and software redundancy. High availability can be provided by detecting node or daemon failure and reconfiguring the system appropriately so that the workload can be taken over bi the remaining nodes in the cluster. This paper presents how to provide the guaranteeing high availability of clustering web server. The load balancer becomes a single failure point of the whole system. In order to prevent the failure of the load balancer, we setup a backup server using heartbeat, fake, mon, and checkpointing fault-tolerance method. For high availability of file servers in the cluster, we setup coda file system. Coda is a advanced network fault-tolerance distributed file system.

• 전력전자학회논문지
• /
• 제21권1호
• /
• pp.72-79
• /
• 2016

Uninterruptible power supplies are extensively used as backup power in various applications such as telecommunication systems, Internet data centers, hospitals, and military technologies. Some of these applications require a considerable number of batteries, and the maintenance of such batteries is critical for the reliability of a system. However, batteries are chemical energy storage devices that deteriorate over time and frequently inspecting their performance and suitability is difficult. A real-time remote battery inspection system that applies electrochemical impedance spectroscopy is proposed and implemented in this study. The proposed system consists of a small inspection circuit and software for control. The former is developed to monitor the impedance variation of the battery and to diagnose its state. The validity and feasibility of the proposed system is proven by experimental results.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2002년도 추계학술발표논문집 (상)
• /
• pp.159-162
• /
• 2002

최근 SAN과 NAS와 같은 기술의 발전과 함께 대용량의 데이터를 효과적으로 백업하기 위한 요구들이 증가되고 있다. 본 논문에서는 백업을 위해 제안된 개방형 표준 프로토콜 NDMP를 이용하여 SAN 환경에 적합한 백업 소프트웨어를 설계하고 구현한다. 본 백업 소프트웨어는 일반 과일 시스템의 백업은 물론 데이터베이스, 원시 데이터의 백업이 가능하다. 또한 SAN 환경에 적합하도록 Lan-free 백업과 온라인 백업을 지원한다.

• 에너지공학
• /
• 제13권1호
• /
• pp.51-59
• /
• 2004

국내에 설치 운영중인 원전 훈련용 시뮬레이터의 핵 증기공급 계통 열수력 프로그램은 1980련 전후에 외국 벤더들이 개발하여 공급한 것으로 이들 열수력 프로그램은 핵 증기공급 계통 열수력 현상을 실시간으로 모의하기 위해 과도하게 단순화된 모델을 채택하고 있다. 그 결과 원자로 냉각계통에 복잡한 이상유동이 발생하는 사고를 모의하는 경우 정확도가 떨어질 수 있어 부정적인 훈련(Negative training)을 초래할 가능성이 있다. 이와같은 문제를 해결하기 위해 전력연구원에서는 RETRAN-3D코드를 기본으로 시뮬레이터용 핵 증기공급 계통 열수력 프로그램 ARTS코드를 개발하였다. RETRAN-3D코드를 기본으로 하는 ARTS코드는 거의 대부분의 사고를 실시간으로 모의할 수 있으며 계산의 건전성도 보장된다. 그러나, 대형냉각재 상실사고나 저압 저유속 상태의 장기 과도현상 등을 모의하는 경우에 발생하는 계산실패나 실시간 계산 지체등의 가능성이 있다. 이 경우 이를 자동으로 대체 보완할 수 있는 보조계산체계를 개발했다. 특히, ARTS코드의 실시간 계산 및 건전성 문제가 예상되는 대형냉각재 상실사고를 주모의 대상으로 간주했다. 계산 결과는 코드의 정확도, 실시간 계산능력, 건전성 및 운전원 교육등에서 최종안정성평가보고서 및 ANSI/ANS-3.5-1998$^{[1]}$ 시뮬레이터 소프트웨어 기준을 만족하는 것으로 평가되었다

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4529-4548
• /
• 2016

DDoS attacks have had a devastating effect on the Internet, which can cause millions of dollars of damage within hours or even minutes. In this paper we propose a practical dynamic defense approach that overcomes the shortage of static defense mechanisms. Our approach employs a group of SDN-based proxy switches to relay data flow between users and servers. By substituting backup proxy switches for attacked ones and reassigning suspect users onto the new proxy switches, innocent users are isolated and saved from malicious attackers through a sequence of remapping process. In order to improve the speed of attacker segregation, we have designed and implemented an efficient greedy algorithm which has been demonstrated to have little influence on legitimate traffic. Simulations, which were then performed with the open source controller Ryu, show that our approach is effective in alleviating DDoS attacks and quarantining the attackers by numerable remapping process. The simulations also demonstrate that our dynamic defense imposes little effect on legitimate users, and the overhead introduced by remapping procedure is acceptable.

• 디지털융복합연구
• /
• 제11권4호
• /
• pp.467-472
• /
• 2013

최근 ICT와 의료 기술 및 서비스의 융합 강도가 높아지면서 ICT 기반 의료기기 및 장비, 소프트웨어, 서비스 개발 등의 부가가치가 높아지고 있다. 본 논문에서는 의료분야 데이터 백업 이슈 등에 대한 시장 환경 분석을 통한 사업 타당성 검토와 클라우드 서비스 비즈니스 거래 유형 분석을 통해 의료 분야의 새로운 융합 비즈니스 모델을 도출하고, 향후 고객 확보 및 시장 확대, 경쟁력 강화 등을 위한 사업화 활용 모델의 개발 방향을 제안한다. 본 연구는 클라우드 서비스의 새로운 융합 비스니스 모델을 설계 할 때 산업의 핵심 역량 강화 전략 및 제휴 연계 전략을 수립하는데 가이드라인을 제공해 줄 것이다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권11호
• /
• pp.4720-4738
• /
• 2015

Proper management on user-driven virtual circuits (VCs) is essential for seamless operation of virtual networks. The Network Provisioning System (NPS) is useful software for creating user-driven VCs automatically and must take fault management into account for physical layer impairments on user-driven VCs. This paper addresses a user-driven and trusty protection management in an NPS with an open standard Network Service Interface (NSI), as a contribution to show how to implement the user-driven and trusty protection management required for user-driven VCs. In particular, it provides a RESTful web service Interface for Configuration and Event management (RICE) that enable management of a distinguished data and control plane VC status between Network Service Agents (NSAs) in the event of a node or link fault and repair in a domain. This capability represents a contribution to show how network and protection events in a domain can be monitored between NSAs (NPSs with the NSI) in multiple domains. The implemented NPS controls and manages both the primary and backup VC with disjoint path in a user-driven manner. A demonstration to verify RICE API's capability is addressed for the trusty protection in the dynamic VC network.