• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.6
• /
• pp.841-847
• /
• 1993

The evaluation methods of the splicing loss in attenuation characteristics of optical fiber were measured and analyzed presently, the splicing loss of single mode optical fiber is measured by the cut-back technique and the backscattering technique. Comparing the splicing loss measured by above two technique, evaluation method of splicing loss measured by backscattering technique (OTDR) shall be calculated by the splicing loss is occurred due to difference of the backscattering coefficient in the spliced fibers. Thus. this analysis of the splicing loss is certainly applied in installation of the optical fiber cables for management of the data.

• Korean Journal of Remote Sensing
• /
• v.26 no.1
• /
• pp.21-27
• /
• 2010

This paper presents a numerical simulation of the radar backscattering from oil spills on ocean surface. At first, a one-dimensionally rough sea surface is numerically generated for a given wind speed at HEBEI SPIRIT accident. Then, an oil-spilled sea surface is represented with a two-layered medium, which is generated by adding a thin low-dielectric oil layer on the randomly-rough highdielectric sea surface. The backscattering coefficients of various oil-spilled sea surfaces are obtained using the Method of Moments and Monte Carlo technique for various surface roughness, oil-layer thicknesses, frequencies, polarizations and incidence angles. The numerical method is verified with theoretical models for simple structures. The reduction of the backscattering coefficients due to the lowdielectric oil-layers on sea surfaces has been analyzed. These numerical results will help to detect any oil spills on sea surfaces, and consequently, to classify SAR images.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.9 s.112
• /
• pp.804-810
• /
• 2006

In this paper, we describe a measurement technique for the backscattering coefficient and ground truth of a vegetation canopy in detail. A simple microwave backscattering model for vegetation canopies is verified by being compared with this measurement. An R-band$(1.7\sim2.0GHz)$ scatterometer system is used to measure the backscattering coefficient of a vegetated area in the Han-river park for various incidence angles and a wide range of the soil moisture contents. It is found that the model agrees quite well with the measurements for co-polarized radar backscatter, and needs a correction for cross polarized radar backscatter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.476-482
• /
• 2014

In this study, we analyzed the effect of corn growth on the radar backscattering coefficient. At first, we measured the backscattering coefficients of various corn fields using a polarimetric scatterometer system. The backscattering coefficients of the corn fields were also computed using the 1st-order VRT(Vector Radiative Transfer) model with field-measured input parameters. Then, we analyzed the experimental and numerical backscattering coefficients of corn fields. As a result, we found that the backscatter from an underlying soil layer is dominant for early growing stage. On the other hand, for vegetative stage with a higher LAI(Leaf-Area-Index), the backscatter from vegetation canopy becomes dominant, and its backscattering coefficients increase as incidence angle increases because of the effect of leaf angle distribution. It was also found that the estimated backscattering coefficients agree quite well with the field-measured radar backscattering coefficients with an RMSE(Root Mean Square Error) of 1.32 dB for VV-polarization and 0.99 dB for HH-polarization. Finally, we compared the backscattering characteristics of vegetation and soil layers with various LAI values.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1196-1203
• /
• 2012

This paper presents a study on the calibration of a C-band HPS(Hongik Polarimetric Scatterometer) system using the DMMCT(Differential Mueller Matrix Calibration Technique). For calibration of the polarimetric scatterometer system, a fully-polarimetric antenna pattern(magnitudes and phase-differences) of the antenna main-beam is measured using a conducting sphere at anechoic chamber. The polarimetric scatterometer system could be accurately calibrated after retrieving its distortions using the DMMCT. Unlike a single-polarimetric system, in a fully-polarimetric system, not only backscattering coefficients but also phase differences are important parameters. This calibrated HPS system can be used to measure accurate Mueller matrices of bare soil surfaces, rice paddies, and vegetation fields. The phase-difference parameters as well as the backscattering coefficients for co- and cross-polarizations can then be obtained. The accuracy of calibration was verified by comparing the measured backscattering coefficients with a scattering model. The measured polarization response of a plowed bare field was also compared with the polarization response which was synthesized using a polarimetric scattering model for verifying the calibration technique.

• Korean Journal of Remote Sensing
• /
• v.23 no.2
• /
• pp.145-152
• /
• 2007

The polarimetric backscattering coefficients of a wet-land rice field which is an experimental plot belong to National Institute of Agricultural Science and Technology in Suwon are measured using ground-based polarimetric scatterometers at 1.8 and 5.3 GHz throughout a growth year from transplanting period to harvest period (May to October in 2006). The polarimetric scatterometers consist of a vector network analyzer with time-gating function and polarimetric antenna set, and are well calibrated to get VV-, HV-, VH-, HH-polarized backscattering coefficients from the measurements, based on single target calibration technique using a trihedral corner reflector. The polarimetric backscattering coefficients are measured at $30^{\circ},\;40^{\circ},\;50^{\circ}\;and\;60^{\circ}$ with 30 independent samples for each incidence angle at each frequency. In the measurement periods the ground truth data including fresh and dry biomass, plant height, stem density, leaf area, specific leaf area, and moisture contents are also collected for each measurement. The temporal variations of the measured backscattering coefficients as well as the measured plant height, LAI (leaf area index) and biomass are analyzed. Then, the measured polarimetric backscattering coefficients are compared with the rice growth parameters. The measured plant height increases monotonically while the measured LAI increases only till the ripening period and decreases after the ripening period. The measured backscattering coefficientsare fitted with polynomial expressions as functions of growth age, plant LAI and plant height for each polarization, frequency, and incidence angle. As the incidence angle is bigger, correlations of L band signature to the rice growth was higher than that of C band signatures. It is found that the HH-polarized backscattering coefficients are more sensitive than the VV-polarized backscattering coefficients to growth age and other input parameters. It is necessary to divide the data according to the growth period which shows the qualitative changes of growth such as panicale initiation, flowering or heading to derive functions to estimate rice growth.

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1571-1574
• /
• 2017

In the present work, the gamma ray backscattering technique was used to determine the effective atomic numbers for certain binary alloys. With the help of a muffle furnace, the binary alloys were synthesized using the melt quenching technique with different compositions of $_{82}Pb$, $_{50}Sn$, and $_{30}Zn$. The intensity distribution of backscattered photons from radioactive isotope $^{22}Na$ (511 keV) was recorded with the help of GAMMARAD5 [$76mm{\times}76mm$ NaI(Tl) scintillator detector] and analyzed as a function of both atomic number and thickness of the target material. The effective atomic numbers for the same binary alloys were also computed theoretically using the atomic to electronic cross-section method with the help of the mass attenuation coefficient database of WinXCom (2001). Good agreement was observed between theoretical and experimental results for the effective atomic numbers of all the selected alloys.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.183-187
• /
• 2007

적조원격탐사의 기초연구로서 적조생물의 광학적 특성을 조사하였다. 연구에 사용된 적조생물 종은 와편모조류에 속하는 종으로 Scrippsiella trochoidea이다. 광학적 특성 조사를 위해 순수 배양된 생물종을 미세조류은행(KMCC)에서 구입하여 배양하였다. 배양된 샘플로 chlorophyll 농도, 홉광계수(absorption coefficient, a), 소산계수 (attenuation coefficient, c), 역산란계수(backscattering coefficient, $b_b$), 입자크기분포(size distribution, Fd)를 측정하였다. 본 연구의 결과는 2000년 적조 생물종 원격탐사 기술개발 보고서의 결과와 비교해 보았으며, 홉광계수 측정방법에 있어서 filter technique과 부유상태에서 측정한 결과를 비교하였다. 홉광계수에 있어서 기존연구와 본연구의 결과는 매우 유사한 홉광 스펙트럼올 나타내었으며，filter technique와 부유상태에서 측정한 홉광도는 filter technique를 이용한 것이 높은 값을 나타내었다. 이는 multiple absorption, 즉 ${\beta}-effect$에의한 것으로 보인다. 역산란 스펙트럼은 노이즈가 많이 나타났는데 이것은 농도가 충분하지 않아서 나타난 것으로 추정된다. 적조생물의 고유광특성이 해색에 영향을 미칠것이라고 보고 이들 결과는 해색을 재현하기 위한 해색모텔의 입력변수로 활용될 수 있다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.5
• /
• pp.541-548
• /
• 2003

Species identification in hydroacoustic survey is one of the key requirements to estimate biomass of organism and to understand the structure of zooplankton community. Feasibility of species identification using two frequencies (38 and 120 kHz) was investigated on the basis of mean volume backscattering strength difference (MVBS). Virtual echogram technique was applied to two frequencies data sets that obtained from surveys in the Antarctic Ocean and Yellow Sea. Virtual echogram method using MVBS revealed the possibility of species identification, which species identification relying on visual scrutiny of single frequency acoustic data resulted in significant errors in biomass estimation. Through noise cancellation using MVBS, much of the acoustic noise caused by acoustic instruments could be removed in new virtual echogram, and the biomass estimation and data quality was improved.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.889-899
• /
• 1999

A technique to obtain an exact frequency characteristics of desired targets in radar measurements is presented. The pulsing network composed of two RF switches was installed between the Network Analyzer and the antenna, and the backscattering from a metal sphere was measured at X-band. It is shown that the pulsing effectively eliminated undesired returns from antenna and other circuitry of the systems. The antenna return was suppressed by more than 60 dB, and the signal-to-noise ratio was improved drastically. The pulsed frequency data were processed to extract the responses of the desired target. The result agrees well with the theoretical backscattering characteristics of the sphere. The methods presented here are applicable to RCS measurements in compact ranges, and also to the backscattering measurements of distributed targets outdoors.