• 한국정보처리학회논문지
• /
• 제7권4호
• /
• pp.1246-1264
• /
• 2000

An input-output buffering switch operates in either of tow different cell loss modes; Backpressure mode and Queueloss mode. In the previous studies, the Backpressrue mode is more effective at low traffic loads, and the Queueloss mode performs better at high traffic. We propose a new operation mode, called Hybrid mode, which adopts the advantages of he Backpressure and the Queueloss mode. Backpressure and Queueloss modes are distinguished from whether a cell loss occurs at the output buffer or not when output buffer overflows, irrespective of input buffer status. In order to simply combine Backpressure and Queueloss mode, the change of input traffic load must be measured. However, in the Hybrid mode, simply both of the input and output buffer overflow and checked out to determine the cell discard. The performance of the Hybrid mode is compared with those of the Backpressure and the Queueloss mode under random and bursty traffic. This paper show that the Hybrid mode always gives the best performance results for most ranges of load values.

• 정보처리학회논문지C
• /
• 제9C권4호
• /
• pp.531-542
• /
• 2002

입력과 출력에 버퍼를 갖는 ATM 교환기의 셀 폐기 방법은 기존의 귀환(Backpressure)모드와 손실(Queueloss)모드가 있으며, 최근에는 두 모드의 단점을 보완한 하이브리드(Hybrid)모드가 제안되었다. 하이브리드모드는 목적하는 출력 버퍼와 입력 버퍼가 모두 포화일 경우에만 셀을 폐기하는 방식이다. 본 논문에서는 유니폼 트래픽하에서 Output-port expansion 기법을 사용한 귀환 손실 모드 및 하이브리드모드 하에서의 셀 손실률과 셀 지연을 성능 비교 분석한다 Output-port expansion 기법은, 한 타임 슬롯동안에 입력포트 당 하나의 셀만 교환되며, 만약 하나 이상의 셀들이 같은 출력포트로 향하고자 하면, 최대 교환되는 셀 수를 K(Output-port expansion ratio)개로 제한하는 방식이다. 셀 손실률을 비교 분석한 결과, 이전의 연구에서와는 달리 로드 0.9를 기점으로. 0.9이하의 로드에서는 하이브리드 모드가, 0.9 이상의 로드에서는 손실모드가 가장 낮은 셀 손실률을 보인다. 셀 지연을 비교 분석한 결과, 한 개의 교환기 성능 분석에서는 셀 손실로 인한 재전송(retransmission)을 고려하지 않는 관계로, 예상한 바와 같이, 로드가 많아질수록 셀 손실률이 높은 귀환모드가 K를 높일수록 다른 모드에 비해 낮은 셀 지연을 보였다.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1371-1378
• /
• 2000

To reduce backpressure for improving engine power in exhaust system, a large difference of pressure is required, but this is in conflict with the requirement for reducing exhaust noise that needs a small pressure difference. In this paper, the controllable muffler designed by simplifying the structure of the exhaust system has a low backpressure and a proper sound specification to the rotation of engine. The exhaust system in conventional studies has been designed to have maximum noise reduction over the whole driving domain, but due to its complex structure this led to increased backpressure. If the muffler is designed according to the driving frequency, which is a dominant noise component in stationary driving speed, the backpressure is reduced due to the simplified structure of the muffler. Furthermore, a multi-mode muffler able to change structure with varied driving speed was designed.

• 한국수소및신에너지학회논문집
• /
• 제20권4호
• /
• pp.283-290
• /
• 2009

This study focuses on the performance characteristics of polymer electrolyte membrane fuel cell (PEMFC) using the AC impedance technique. The experiment was carried out to investigate the optimal operating conditions of PEMFC such as cell temperature, flow rate, humidified temperature and back-pressure. The fuel cell performance was analyzed by DC electronic-loader with constant voltage mode and expressed by voltage-current density. Additionally, AC impedance was measured to analysis of ohmic and activation loss and expressed by Nyquist plot. The results showed that the cell performance increased with increase of cell temperature, air flow rate, humidified temperature and backpressure. Also, the activation loss decreased as the increase of cell temperature, air flow rate, humidified temperature and backpressure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.46-50
• /
• 1997

Acoustic signals from the vehicle muffler has various kinds of noises. For control of noise from the vehicle muffler, the major part of noise to be contorted is that correlated with the revolution of the vehicle engine. For this reason the most efficient method for noise control is to use the extracted acoustic signals correlated with revolution as a controlled factor. Therebefore in this paper we developed and proofed an algorithm for efficient amplitude detection and phase detection related to the engine operating revolution from the vehicle muffler noise by orthogonality.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.142-147
• /
• 1996

For prediction and control of sound, acoustic systems must be modeled. Because sound systems like exhaust systems are very difficult to calculate mathematically, this study presents a method to determine experimentally the order of poles by transfer function. When designing a control system by traditional methods the exact model order and coefficient of the system to be controlled must be determined. But in acoustic systems, where systems to be controlled are very complex, mathematical interpretation is almost always impossible. Therefore transversal filters using trial and error methods to determine model order of a system are used to design a system. Compared to mathematical models with poles, transversal filters, in which the model order becomes relatively large, have the disadvantage of prolonged processing time and marked time delay. This study presents a method to determine experimentally the order of poles in a system model with poles and zeroes. Also, the validity of this method was verified mathematically and confirmed by application in general simple models and acoustic tube simulators.