• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.5
• /
• pp.382-388
• /
• 2016

When Flat Panel Display (FPD) is made with backlight module, such as LED TV, it inherently suffers from the non-uniform backlight luminance problem that results in un-even brightness distribution throughout the TV screen. If the luminance of each pixel location of a TV screen as a function of the driving voltage can be measured, it can be used to compensate the non-uniformity of the backlight module. We use a carefully calibrated imaging system to take pictures of a TV screen at different levels of brightness and generate the compensation functions for the driving circuitry to correct the luminance level at each pixel location. Making use of the fact that the luminance of the screen is normally brightest at around the center of the screen and gradually decreases toward the border of the screen, the luminance of the whole TV screen is approximated by a mathematical function of the pixel locations. The parameters of the function are computed in the least square sense by the values of both the pixel luminance sent from the driving circuit and the grayscale value measured from the image taken by the imaging system. To justify the correction system, a simple second order polynomial function is used to approximate the luminance across the screen. When the driving circuit voltage is corrected according to the measured function, the variance of the screen luminance is reduced to one tenth of the one measured from the un-corrected TV screen.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.113-118
• /
• 2022

Motivated by people highlighting important phrases while reading or taking notes we propose a neural network training method by highlighting defective pixel areas to classify effectively defect types of images with complex background textures. To verify our proposed method we apply it to the problem of classifying the defect types of tire band fabric images that are too difficult to classify. In addition we propose a backlight highlighting technique which is tailored to the tire band fabric images. Backlight highlighting images can be generated by using both the GradCAM and simple image processing. In our experiment we demonstrated that the proposed highlighting method outperforms the traditional method in the view points of both classification accuracy and training speed. It achieved up to 13.4% accuracy improvement compared to the conventional method. We also showed that the backlight highlighting technique tailored for highlighting tire band fabric images is superior to a contour highlighting technique in terms of accuracy.

• Journal of Information Display
• /
• v.11 no.1
• /
• pp.24-27
• /
• 2010

A novel stereo 3D LCD for passive interference filter glasses is presented. A demonstrator based on a standard 120Hz LCD was set up. Stereoscopic image separation was realized in a time-sequential mode using a LED-based scanning backlight with two complementary spectra. A stereo brightness of 3 cd/$m^2$ and a channel separation of 30:1 were achieved.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.347-348
• /
• 2007

Most of the power consumption of a LCD TV is form the back light unit. Therefore, technoledge for decreasing the power consumption of the backlight unit is crucial for LCD Tvs. This research suggests a method of decreasing the power comsumption of LCD TV by analyzing the image's RGB info to dimm partitioned backlights independently.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.6-7
• /
• 2009

We proposed the two-dimensional (2D) / three-dimensional (3D) convertible modified integral imaging system using functional polarizing film named $imazer^{TM}$, which transfer or scatter the incident light ray according to the polarizing direction of ray. When the incident light rays transfer to $imazer^{TM}$, the rays generate 3D image through the process of the modified integral imaging system. However, the scattered light rays generate 2D image through the simple backlight scheme when the incident rays are scattered by the film. The proposed method can be implemented the partial 3D display system without any mechanical movements. In this paper, we propose and verify our system using some basic experiments and its results.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.3
• /
• pp.261-268
• /
• 2014

Precision screws have a wide range of industrial applications such as electrical and automotive products. To produce screw threads with high precision, not only high precision manufacturing technology but also reliable measurement technology is required. Machine vision systems have been used in the automatic inspection of screw threads based on backlight illumination, which cannot detect defects on the thread surface. Recently, an omnidirectional inspection system for screw threads was developed to obtain $360^{\circ}$ images of screws, based on front light illumination. In this study, the illumination design for the omnidirectional inspection system was modified by adding a light shield to improve the image uniformity. Optical simulation for various shield designs was performed to analyze image uniformity of the obtained images. The simulation results were analyzed statistically using response surface method, from which optical performance of the omnidirectional inspection system could be optimized in terms of image quality and uniformity.

• The Journal of Economics, Marketing and Management
• /
• v.8 no.2
• /
• pp.13-17
• /
• 2020

Purpose: In modern corporate management, the establishment of a crisis management system that minimizes damage through measures used to respond to corporate crises is no longer an option. The importance of corporate reputation and brand asset management in modern enterprise management cannot be overemphasized and negative events that might arise from a number of different causes can cause brand crises. Research design, data and methodology: More than half of the questionnaire respondents were female (252 or 53%). More than a fourth of the respondents were aged 20 (122 or 26%) and the number of married participants was 196 (41%). Of the participants, 32% (153) had graduated from college. Only 18% (87) were employees and the monthly household income was 121. In this study, we conducted factor analysis in order to extract the variables that may enhance the explanation capability of each variable. For the method of factor extraction, an Eigen value of at least 1 was used as was factor loading. An analysis was performed using the Cronbach's alpha coefficient to verify the reliability of the measurement scale. Results: First, the analysis of the impact of the social responsibility activities on brand image revealed that the social, economic, philanthropic, ethical, and environmental responsibility activities significantly affected brand image, but legal responsibility activities were not statistically significant. Second, the analysis of the impact of brand image on loyalty showed that brand image had a significant impact on loyalty. Third, the analysis of the impact of social responsibility activities on loyalty showed that they had a significant impact on loyalty. Conclusions: The pro-social enterprise image is not only a brand asset that can be shared, but also a heavy proposition followed by a corresponding social responsibility, it will have to practice transparent corporate management based on clear principles through the establishment of various systems and the implementation of a strict code of conduct within the enterprise.

• Annual Conference of KIPS
• /
• 2016.10a
• /
• pp.655-657
• /
• 2016

우리는 빛의 정도에 따라 사진의 밝기와 채도, 대비를 보정하고 더 나아가 역광을 보정하는 기술을 구현하였다. 색감과 질감의 경우, 기존과는 다른 방법으로 질감과 색감을 추출했다. 역광보정은 자동이나 수동으로 할 수 있는데, 수동으로 역광보정을 적용하기 위해서는 먼저 관심영역을 지정해 주어야한다. 관심영역은 사진 속 원하는 부분의 윤곽선을 이어줌으로써 선택한다. 우리는 자석 올가미를 통하여 섬세한 선택을 가능하게 하였다. 기존 올가미 기능은 시작점과 끝점을 일치시켜 주어야 하는 단점이 있었으나 제안하는 올가미 기능은 시작점과 끝점을 일치시키지 않아도 관심영역을 선택할 수 있는 장점이 있다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.12
• /
• pp.1002-1010
• /
• 2016

This paper describes the design of a cellphone curved glass measuring device using by camera. The measuring device was composed of two camera, two backlight system, a body and so on, and the program was made for a camera calibration and noise removal, and also the program was made for height measurement of a cellphone curved glass using by subpixel algorism. And then a new technique for measuring the height of the cell phone curved glass was proposed. The characteristics test of height measurement of gage blocks and cell phone curved glasses was carried out, the error of the height measurement of gage block is less than ${\pm}0.005$ and the error of the height measurement of the cell phone curved glasses is less than ${\pm}0.005$. Thus it thought that the designed cellphone curved glass measuring device and the new technique for measuring the height was used to measure the height of the cellphone curved glass.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.3
• /
• pp.271-278
• /
• 2014

In spite of that stop line and crosswalk should be aware of the most basic objects in transportation system, its features extracted are very limited. In addition to image-based recognition technology, laser and RF, GPS/INS recognition technology, it is difficult to recognize. For this reason, the limited research in this area has been done. In this paper, the algorithm to recognize the stop line and crosswalk is designed and implemented using image-based recognition technology with the images input through a vision sensor. This algorithm consists of three functions.; One is to select the area, in advance, needed for feature extraction in order to speed up the data processing, 'Region of Interest', another is to process the images only that white color is detected more than a certain proportion in order to remove the unnecessary operation, 'Color Pattern Inspection', the other is 'Feature Extraction and Recognition', which is to extract the edge features and compare this to the previously-modeled one to identify the stop line and crosswalk. For this, especially by using case based feature comparison algorithm, it can identify either both stop line and crosswalk exist or just one exists. Also the proposed algorithm is to develop existing researches by comparing and analysing effect of in-vehicle camera installation and changes in recognition rate of distance estimation and various constraints such as backlight and shadow.