• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1450-1452
• /
• 2009

In this work, a plastic diffuser which has a surface similar to Sinusoidal wave profile for application of LC D backlighting is proposed. This new pattern diffuser is achieved the values of the transmission efficiency an d diffusion efficiency all over 70%, and it also has the value about gain over 1.1. Additionally, this new patter n diffuser has high uniformity when we put it in the LCD backlight module and its thickness is only 2mm. With these foregoing properties, this diffuser film can widely applied to LCD displays systems etc.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1316-1318
• /
• 2009

Nonideality of LED lens and diffuser as well as crosstalk between backlights should be compensated because they have large effects on image qualities. The computation complexities of conventional compensations are greatly increased as resolution becomes higher. The block based compensation is proposed to alleviate the computation complexity considering backlight profiles and image pixel characteristics.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.95-98
• /
• 2009

This paper dealt with the design guide of the conventional edge-lit backlight optic with which the on-axis luminance could be increased by trying to improve the light condensing efficiency of a bright enhancement film (BEF). First, the general design guide concerned with the backlight optic was proposed, and then its validness was experimentally proved by conducting design examples with haze controls of both diffuse film and microdot material printed on the backside of the light guide plate. Experimental results showed that the variation range of the on-axis luminance by the present approach was about $5{\sim}9%$, which would be by no means negligible in the practical application.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.173-176
• /
• 2000

we analyzed multiple ray tracing in the highly scattering optical transmission(HSOT) polymer plate by means of the Monte carlo simulation. Light transmission behavior in the light guide was simulated by a 3-dimensional ray tracing program considering scattering angle given by the Mie theory and mean free path. To improve the uniformity of the conventional HSOT backlight unit, We employed additionally dot patterns. For the proposed structure, we calculated the light transmission behavior and obtained a bright and uniform backlight unit for a large size LCD panel of more than 12 inch.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04a
• /
• pp.70-71
• /
• 2009

Photoelectric characteristics of a hydrogenated amorphous silicon thin film transistor(a-Si:H TFT) were obtained for the illumination from various backlight sources and the results were compared and analyzed in terms of the photon energy spectral characteristics of the backlights obtained from the integration of the multiplication of the photon energy and the spectral intensity at etch wavelength. It was possible to conclude that the absorption of illuminated backlight to a-Si:H layer and the generation of electrons and holes are mainly carried out at the wavelength less than 500nm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1586-1589
• /
• 2007

The influence of optical components constituting the backlight of TV on the luminance property of backlight was analyzed. The variation of luminance when the light emitted from light source passes each optical part was evaluated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.827-830
• /
• 2008

We proposed a new Mercury-free flat fluorescent lamp (MFFL) for LCD backlight which has the scanning ability to reduce the blurring edges of moving images. We expanded the single cell MFFL with 2.2 inch diagonal size into the multi-cell MFFL for the 32-inch LCD-TV backlight application, and examined its response characteristics and proposed a driving scheme for scanning.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1135-1138
• /
• 2003

A direct light type backlight for large-area LCD-TVs using External Electrode Fluorescent Lamps (EEFLs) has been developed. The brightness was $450cd/m^{2}$(nit) and the luminous uniformity (max/min) was 1.3. The mechanical design of backlight was optimized and the reliability of lamps was secured. As a result, the possibility of backlight with EEFLs for large area LCD-TVs was sufficiently proved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.644-647
• /
• 2003

In this paper, Small scaled multilayered piezoelectric transformer of Rosen type has been fabricated and tested for the purpose of PDA backlight. Turn on characteristics of PDA backlight has been traced with different voltages. $22{\times}4.5{\times}1.1[mm^3]$ multilayered transformer shows full turn-on behavior starting from 4.3[V].

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.2
• /
• pp.310-314
• /
• 2015

To improve the optical performance of the backlight unit with light guide plate(LGP), we investigated the effects of LGP patterns on the brightness and viewing angles properties of the backlight unit. We designed several patterns of LGP and calculated their optical properties by the optical simulation. The results reveal that the highest brightness and wide viewing angle was achieved with the extended-closed-polygon diffusion pattern and upper triangle prism pattern of the LGP.