• 한국지진공학회논문집
• /
• 제2권3호
• /
• pp.61-71
• /
• 1998

A performance-based seismic design method for reinforced concrete building structures being developed in Japan is outlined. Technical and scientific background of the performance-based design philosophy as well as recently developed seismic design guidelines are is presented, in which maximum displacement response to design earthquake motion is used as the limit-state design criteria. A method of estimating dynamic response displacement of the structures based on static nonlinear analysis is described. A theoretical estimation of nonlinear dynamic response considering the characteristics of energy input to the system is described in detail, which may be used as the standard method in the new performance-based code. A desing philosophy not only satisfying the criteria but also evaluating seismic capacity of the structures is also introduced.

• Wind and Structures
• /
• 제30권6호
• /
• pp.559-573
• /
• 2020

This paper presents a study on the effectiveness of the proper orthogonal decomposition (POD) technique for reconstruction of wind pressure field as applied to a cylindrical shell roof based on simultaneously measured wind pressure data. The influence of wind loading mode truncation on the statistics of dynamic pressures and wind load effects are investigated. The results showed that truncation of higher wind loading modes can have more noticeable influence on the maximum and minimum pressures that the standard derivation (STD) values. The truncation primarily affects the high-frequency content of the pressures. Estimation of background response using wind loading modes is more effective than the use of traditional structural modal analysis.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(3)
• /
• pp.181-184
• /
• 2000

This paper presents an experimental system, where an object extracted from an image sequence is embedded into the desired position in a scene. First, a moving object is detected and the 3-D structure is obtained by SFM analysis of comer trajectories. We constrained the motion to translational motion only. Extracted objects are classified by matching with 3-D models and then the structure of the occluded part is restored. Camera calibration is performed for the background scene which will embed the object. Finally, the object is embedded into the scene. In the experiments, we used synthetic image sequences generated with OpenGL library for easy evaluation of the 3-D structure estimation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1416-1423
• /
• 2007

Dynamic instability of the railway bridge can cause track irregularities and be directly connected with unstable passenger comfort and derailment of the train. Europe and Japan had studied on this problem for a long time since 1960's, Results of those studies are reflected in recent Eurocode and the bridge design code of Japanese railway bridges. However, even though some traffic safety requirements were applied in Kyoung-bu highspeed railway by French engineers, we experienced many difficulties from insufficient information of criteria background and application procedures. In this paper, a investigation of recent traffic safety requirements of Europe and Japan for railway bridges will be introduced and application procedures for the estimation of dynamic performance will be proposed.

• Nuclear Engineering and Technology
• /
• 제44권8호
• /
• pp.977-984
• /
• 2012

The cross-correlation technique has been widely used for leakage detection of buried pipes, and this technique can be successfully applied when the leakage signal has a high signal-to-noise ratio. In the case of a power plant, the measured leakage signals obtained from the sensors may contain background noise and mechanical noise generated by adjacent machinery. In such a case, the conventional method using the cross-correlation function may fail to estimate the leakage point. In order to enhance the leakage estimation capability of a buried pipe in a noisy environment, an improved cross-correlation technique is proposed. It uses a noise rejection technique in the frequency domain to effectively eliminate the tonal noise due to rotating machinery. Experiments were carried out to verify the validity of the proposed method. The results show that even in a tonal noisy environment, the proposed method can provide more reliable means for estimating the time delay of the leakage signals.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.587-593
• /
• 2000

The background noise and transmission loss of wall were measured on site for the multiplex cinema. The results from the simulation analysis was compared with the measurements from the site for different frequencies to review the acoustical parameters, and the analysis results in the relatively small error. Therefore, it is concluded that the reliable estimation can be made once accurate data such as sound source and sound absorption coefficient of interior material is utilized during the simulation process. However, the calibration is necessary for the test room with the small room volume.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.271-274
• /
• 2000

Despite the increasing necessity of accurate estimation of ring-stiffened cylinders' ultimate strength, the complex structural behavior of cylinders has made their design mainly depend on empirical formulas mostly based on insufficient test data rather than theoretical background. This paper has developed the imperfection method which enables the ultimate strength analysis of buckling sensitive structures by combining two general functions of common commercial finite element softwares, linear elastic buckling analysis and nonlinear stress analysis. Developed method was applied to two of the world most renowned commercial softwares, MSC/NASTRAN and ABAQUS, for the analysis of ring-stiffened cylinders and unexpectedly big difference in their analysis results was found. This tells that many widely used commercial softwares has their different strong points and week points and the choice of commercial software should be cautiously made after thorough inspection. This paper ends with some useful information about which of the aforementioned two softwares is more appropriate respectively for linear elastic buckling analysis and ultimate strength analysis of ring-stiffened cylinders.

• 한국음향학회지
• /
• 제6권2호
• /
• pp.54-61
• /
• 1987

실험실이 아닌 일반음장에서 음향인텐시티법을 이용하여 공조덕트 소기기의 감음성능 평가방법을 검토하였다. 음향인델시티법에 의한 감음량 측정치는 음압법에 의한 측정치보다 이논치와 비교적 잘 일치하였으며, 음향인텐시티법은 음압법에 비하여 음장조건에 따른 영향을 비교적 적게 받는 것으로 나타났다.

• 한국멀티미디어학회논문지
• /
• 제19권4호
• /
• pp.774-779
• /
• 2016

The conventional methods using color signal for tracking the movement of the object require a lot of calculation and the performance is not accurate. In this paper, we propose a method to effectively track the moving objects using the depth information from a depth camera. First, it separates the background and the objects based on the depth difference in the depth of the screen. When an object is moved, the depth value of the object becomes blurred because of the phenomenon of Motion Blur. In order to solve the Motion Blur, we observe the changes in the characteristics of the object (the area of the object, the border length, the roundness, the actual size) by its velocity. The proposed algorithm was implemented in the simulation that was applied directly to the tracking of a golf ball. We can see that the estimated value of the proposed method is accurate enough to be very close to the actual measurement.

• 한국멀티미디어학회논문지
• /
• 제21권9호
• /
• pp.1052-1061
• /
• 2018

In this paper, we propose a new algorithm that is robust against the effects of objects that are relatively unaffected by camera motion and can accurately detect camera motion even in high resolution images. First, for more accurate camera motion detection, a global motion filter based on entropy of a motion vector is used to distinguish the background and the object. A block matching algorithm is used to find exact motion vectors. In addition, a matched filter with the angle of the ideal motion vector of each block is used. Motion vectors including 4 kinds of diagonal direction, zoom in, and zoom out are added additionally. The experiment shows that the precision, recall, and accuracy of camera motion detection compared to the recent results is improved by 12.5%, 8.6% and 9.5%, respectively.