• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.51-58
• /
• 2011

In this paper, a function model of back-to-back PWM converters, based on the switching function, is developed for simplified simulation of power electronic application systems. For the function model, the PWM power switches are represented by dependent power sources. By using the proposed function model, the computer memory and the run time required for the simulation of power circuits can be significantly reduced. It is shown that the simulation results generated from the function models are almost the same as the ones obtained by using the switching power device model.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제15권3호
• /
• pp.200-207
• /
• 2015

This paper proposes an active damping control method for a grid-side converter that has an LCL grid filter in the back-to-back converter. To remove the resonant frequency components produced by the LCL filter, it is necessary to measure the grid current. To do this, sensors must be added. However, it is not necessary to add sensors because the grid current is estimated by designing a suboptimal observer. In order to remove the nonlinearity and to gain fast response of control, both feedback linearization and sliding mode control are applied. The proposed method is verified through a simulation.

• 제어로봇시스템학회논문지
• /
• 제18권4호
• /
• pp.371-374
• /
• 2012

DC/DC switching power converters produce DC output voltages from different stable DC input sources regulated by a bi-polar transistor. The converters can be used in regenerative braking of DC motors to return energy back in the supply, resulting in energy savings for the systems containing frequent stops. The voltage mode DC/DC converter is composed of a PWM (Pulse Width Modulation) controller, a MOSFET (Metal Oxide Semiconductor Field Effect Transistor), an inductor, and capacitors, etc. PWM is applied to control and regulate the total output voltage. It is shown that the output of DC/DC converter depends on the variation of threshold voltage at MOSFET and the variation of pulse width. In the PWM operation, the missing pulses, the changes in pulse width, and a change in the period of the output waveform are studied by SPICE (Simulation Program with Integrated Circuit Emphasis) and experiments.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.685-692
• /
• 2011

DC/DC switching power converters produce DC output voltages from different DC input sources. The converters can be used in regenerative braking of DC motors to return energy back in the supply, resulting in energy savings for the systems containing frequent stops. The current mode DC/DC converter is composed of a PWM (pulse width modulation) controller, a MOSFET, and inductor, etc. Pulse width modulation is applied to control and regulate the total output voltage. It is shown that the variation of threshold voltage at MOSFET and the offset voltage increase caused by radiation effects make the PWM pulse unstable. In the PWM operation, the missing pulses, the changes in pulse width, and a change in the period of the output waveform are studied by simulation program with integrated circuit emphasis (SPICE) and experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.143-145
• /
• 2006

This paper presents an overall control algorithm for a grid-connected wind-power generation system using a DFIG(doubly-fed induction generator) fed by back-to-back PWM converters. The control of DFIG is based on a stator-flux oriented vector control. The system enables not only fast and smooth synchronization but also high performance regulation of active and reactive power. Experimental results shows The feasibility of the control algorithm.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.756-759
• /
• 2014

DC/DC converters are commonly used to generate regulated DC output voltages with high-power efficiencies from different DC input sources. The converters can be applied in the regenerative braking of DC motors to return energy back to the supply, resulting in energy savings for the systems at periodic intervals. The fundamental converter studied here consists of an IGBT (Insulated Gate Bipolar mode Transistor), an inductor, a capacitor, a diode, a PWM-IC (Pulse Width Modulation Integrated Circuit) controller with oscillator, amplifier, and comparator. The PWM-IC is a core element and delivers the switching waveform to the gate of the IGBT in a stable manner. Display of the DC/DC converter output depends on the IGBT's changes in the threshold voltage and PWM-IC's pulse width. The simulation was conducted by PSIM software, and the hardware of the DC/DC converter was also implemented. It is necessary to study the fact that the output voltage depends on the duty rate of D, and to compare the output of experimental result with the theory and the simulation.

• 한국철도학회논문집
• /
• 제15권2호
• /
• pp.116-121
• /
• 2012

DC/DC스위칭 전력 컨버터는 임의의 직류전원을 부하가 요구하는 형태의 직류전원으로 변환시킨다. DC/DC 컨버터는 PWM-IC를 이용하여 주기적으로 입력측에서 출력측으로 전달되는 에너지를 제어하는 기능을 수행하는데, PWM-IC(펄스폭 변조-집적회로), MOSFET(산화물-반도체 전계 효과 트랜지스터), 인덕터, 콘덴서, 저항 등으로 구성되어 있다. 방사선의 영향으로 DC/DC 컨버터의 PWM-IC 를 구성하는 비교기(comparator)와 연산증폭기(OP-Amp.) 등 전자소자의 열화 효과(radiation effects)가 발생되는데, PWM-IC 동작에서 SPICE 시뮬레이션과 실험을 통해 펄스의 상실, 펄스폭의 변화, 그리고 출력파형의 변화를 연구하는데 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.494_495
• /
• 2009

This paper presents a study of DFIG wind power generation system for real-time simulation. For real-time simulation, the real-time digital simulator (RTDS) and its user friendly interface simulation software (RSCAD) are used. 2.2MW grid-connected variable speed DFIG wind power generation system is modeled and analyzed in this study. Stator-flux oriented vector control scheme is applied to stator, rotor side converter control, and back-to-back PWM converters are implemented for the decoupled control. The real-wind speed signal extracted by an anemometer is used for realistic and accurate simulation analysis. Block diagrams for DFIG and control scheme of stator, rotor-side are introduced. Real-time simulation cases are carried out and analyzed for the validity of this work.

• Journal of Electrical Engineering and Technology
• /
• 제5권1호
• /
• pp.61-69
• /
• 2010

This paper presents a study of a DFIG wind power generation system for real-time simulations. For real-time simulations, the Real-Time Digital Simulator (RTDS) and its user friendly interface simulation software RSCAD are used. A 2.2MW grid-connected variable speed DFIG wind power generation system is modeled and analyzed in this study. The stator-flux oriented vector control scheme is applied to the stator/rotor side converter control, and the back-to-back PWM converters are implemented for the decoupled control. The real-wind speed signal extracted by an anemometer is used for a realistic, reliable and accurate simulation analysis. Block diagrams, a mathematical presentation of the DFIG and a control scheme of the stator/rotor-side are introduced. Real-time simulation cases are carried out and analyzed for the validity of this work.

• 조명전기설비학회논문지
• /
• 제21권3호
• /
• pp.44-49
• /
• 2007

본 논문은 기존 컨버터에 보조 스위치와 공진 인덕터, 공진 커패시터, 두개의 다이오드를 추가하여 새로운 소프트 스위칭 액티브 스너버회로가 부가된 컨버터를 제안하였다. 제안한 컨버터는 공진 에너지 회생율을 최대화함으로써 전체적인 효율을 증가시켰으며, 모든 스위칭 소자들이 소프트 스위칭 조건에서 턴-온/턴-오프하여 스위칭 손실을 최소화하였다. 그리고 공진 에너지를 완전히 입력으로 회생시켜 전도손실을 저감시켰다. 이러한 결과는 시뮬레이션과 실험을 통하여 증명하였다.