• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.248-255
• /
• 2006

Among a variety of influencing components, time-variant seepage and long-term underground motion are important to understand the abnormal behavior of tunnels. Excessiveness of these two components could be the direct cause of severe damage on tunnels. however, it is not easy to quantify the effect of these on the behavior of tunnels. These parameters can be estimated by using inverse methods once the appropriate relationship between inputs and results are clarified. Various inverse methods or parameter estimation techniques such as artificial neural network and least square method can be used depending on the characteristics of given problems. Numerical analyses, experiments, or monitoring results are frequently used to prepare a set of inputs and results to establish the back analysis models. In this study, a back analysis method has been developed to estimate geotechnically hard-to-known parameters such as permeability of tunnel filter, underground water table, long-term rock mass load, size of damaged zone associated with seepage and long-term underground motion. The artificial neural network technique is adopted and the numerical models developed in the firstpart are used to prepare a set of data for learning process. Tunnel behavior especially the displacements of the lining has been exclusively investigated for the back analysis.

• 터널과지하공간
• /
• 제15권5호
• /
• pp.344-351
• /
• 2005

터널 시공 중 계측한 변위 등으로 터널의 안정성을 재평가하기 위해 심플렉스 이론을 기초로 직접법 역해석 소프트웨어를 개발하고 그 정확성을 12 가지 조건에서 검증하였다. 이 소프트웨어는 FLAC을 부프로그램(subroutine)으로 하고 그것에 내장된 전산언어를 이용한 것이다. 변위 수 3-240개로 구성된 여러 가지 변위조합에 대한 역해석 검증결과 터널 주변의 계측위치와 입력변위의 개수에 관계없이 암반의 탄성계수와 초기응력 비를 구할 수 있었고 반복계산을 위한 출발값의 탄성계수와 초기응력 비에 관계없이 정해에 안정적으로 수렴되는 것을 확인하였다.

• 소성∙가공
• /
• 제24권3호
• /
• pp.212-217
• /
• 2015

SmartCrown is a system to control the plate crown by shifting the sine-shaped work rolls in the axial direction. The control range of the plate crown depends on a depth of sine-shaped roll profile because the roll radius varies continuously along the axial direction. When the roll profile is changed to improve the control range, the contact stress between the work roll and the back-up roll also changes. In the current study, the contact stress for various profiles and rolling conditions were analyzed using the finite element method and compared with results from Hertzian contact theory. A submodel method is used to increase the accuracy of the finite element analysis. The analysis results showed that the maximum increase in the contact stress was only 53MPa, so it is anticipated that no back-up roll spalling will occur.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.8-19
• /
• 2014

In this paper, a robust design of the back-plate of the brake pad to decrease the uneven wear of the pad was studied. A finite element analysis was performed to analyze the pressure distributions on the contact surfaces. Optimized back-plate shape of the brake pad was determined using the Taguchi method. The effectiveness of the robust design was clarified by the wear tests with a dynamometer.

• 통합자연과학논문집
• /
• 제1권3호
• /
• pp.221-229
• /
• 2008

본 논문에서는 기존의 개인 식별 방법의 한계를 해결하는 대안으로 떠오르고 있는 생체인식 기술 중 인식률이 뛰어나고 신뢰성 있는 홍채인식 시스템을 구현하고자 한다. 구현을 위하여 신호처리 분야에서 주로 사용되는 wavelet변환으로 계수 특징 값 추출을 하였으며, 인식률을 알아보기 위하여 신경망 기법을 이용하고자 한다. 그러나 신경망 기법에서 주로 사용되는 비선형 최적화기법인 Scale Conjugate Gradient는 최적화 문제점을 해결하기에는 수렴속도가 느리기 때문에 적합하지 않다. 따라서 본 논문에서는 기존 Scale Conjugate Gradient를 보완한 Levenberg-Marquardt Back-Propagation을 홍채인식에 적용하여 구현함으로써 인식율을 높이고자 한다. 적용한 알고리즘 구현으로 해의 수렴정도, 변수 벡터의 변화정도에 따라 크기를 적절히 변화시킴으로써 수렴속도를 개선하고, 효율성과 안정성을 동시에 얻을 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.754-755
• /
• 2008

This paper presents a method for reducing the Total Harmonic Distortion(THD) of line-line back_EMF of the IPMSM with distributed winding under the no-load condition. Firstly, the specific harmonic components of line-line back EMF are reduced considering with winding factor. Secondly, THD of line-line back EMF is minimized according to change of pole angle using by Space harmonic Analysis. Finally, the optimal design for minimizing the THD is conducted using response surface methodology with finite element analysis. The validity of the design method dealt with in this paper is demonstrated by comparison between the THD of optimal model and initial model.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권1호
• /
• pp.40-47
• /
• 2014

Sinusoidal back-EMF waveform of vernier Permanent Magnet (PM) machines is analyzed in this paper. An analytical expression of Electromotive Force (EMF) of electric machines including vernier machines is developed to analyze EMF harmonics, and the effect of vernier PM machine pole ratio, the ratio of number of rotor poles to stator poles, on the EMF waveform. Moreover, this paper represents several Finite Element Analysis (FEA) models to verify the analysis based on the proposed expression, and the effect of tooth width ratio, which is the ratio of tooth width to tooth pitch, on back-EMF of vernier PM machines, and optimal tooth width ratio is obtained and verified by FEA. Finally, this paper makes comparisons between EMF waveform of vernier PM machines and that of traditional PM machines from the point of view of analytical EMF expression.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.199-215
• /
• 2003

The purpose of this study was to attempt new starting motion and supply present starting motion in the 500M short track speed skating according to the center of gravity position. The center of gravity position ratio was divided starting motion into five(type A : front 80%-back 20%, type B front 70%-back 30%, type C : front 50%-back 50%, type D : front 30%-back 70%, type E : front 20%-back 80%). The three dimension motion analysis with DLT(direct linear transformation) method was executed using two video cameras. The following conclusion was that It was appear that reaction and execution time in starting motion was the most short in type B. It was characteristic that step of skaters was shorten and center of gravity position ratio was not effect to change of the step in each event. It was appear that the displacement of type D and type E were longer than that type A and type B during the starting motion. It was appear that skill types of center of gravity position ratio to the front were lower than that to the back and contract a posture. Observing the above, it was conclusion that skill type B of center of gravity position ratio to the tent was more effect than that to the back. But it is important that these skill type was most used to the competition and estimate the result.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.30-34
• /
• 2013

Prevention of exhaust gas back flow becomes a great interest to shipyards and shipowners in large container carriers because exhaust gas pollutes cargoes, flows back into the deck house and the engine room area through fresh air intakes and fan rooms, gives harmful damages to the crew's health and also gives thermal damages to electric equipments on the navigation deck. The phenomena of exhaust gas back flow has been studied with the analysis of sea trial records and wind tunnel tests and the height of the exhaust gas pipe, the front area of the deck house, the inflow speed and the position of the radar mast platform has been confirmed as the principal factors of exhaust gas back flow phenomena. The simple empirical formula to estimate exhaust gas back flow phenomena and the design guidances of exhaust gas related structures on deck has been introduced. In future, parametric studies for the exhaust gas back flow factors will be carried out with the CFD analysis. The results of this study will be the guide for development of the prevention method of exhaust gas back flow phenomena for large container carriers.

• 한국지반공학회지:지반
• /
• 제12권3호
• /
• pp.83-98
• /
• 1996

이 논문에서는 역순법 원리를 이용한 역해석 결과를 제시하였다. 국내에서 건설된 두 곳의 지하비축기지 공사 중에 계측한 자료를 이용하여 비축기지 진입터널 주위 암반의 변형계수와 초기 지압을 계산하였다. 역해석에서 얻어진 결과를 입력자를로 하여 유한요소해석을 수행하였으며 그 결과를 계측치와 비교, 검토하였다.