• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.198-207
• /
• 1996

Electro sensitive traffic system can't consider passenger car unit, so, it causes start up delay time and passenger waiting time. In this paper, it antecedently creates optimal traffic cycle of passenger car unit at the bottom traffic intersection. But, sometimes it can make mistakes due to changes in car weight, car speed, and control of feed-back data. Moreover, to prevent spillback, it can adapt control even though upper traffic intersection has a different saturation rate, road length, road slope and road width.

• Journal of Families and Better Life
• /
• v.27 no.4
• /
• pp.117-126
• /
• 2009

The purpose of this study was to analyze the difference of working mothers' work-child rearing strain and their demand on special care services according to each mother's work conditions and childcare situation. 477 working mothers who have only one child each were gathered by the use of the purposive quota sampling method and analyzed with t-test, F-test, correlation, and multiple regression. The main results showed that working mothers had high work-child rearing strain and demand on special care services when their working conditions were inflexible and they were not satisfied with the care services for their child. The major variable which explained working mothers' demand on special care services was e their work-child rearing strain.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.221-224
• /
• 2001

The dynamic characteristics of a hydraulic press for micro-stamping are investigated by Finite Element Analysis. This machine requires high precision in producing milli-structure of electric products such as TFT-LCD back-up light reflector. First, the modal analysis of the parts and the assembly of the hydraulic press is performed. Then, the sensitivity analysis is carried out. The results show that the bearing stiffness and the base mounting stiffness affect the specific mode shapes.

• Journal of Korean Neurosurgical Society
• /
• v.54 no.1
• /
• pp.50-53
• /
• 2013

Spinal subarachnoid hemorrhage (SAH) due to solitary spinal aneurysm is extremely rare. A 45-year-old female patient visited the emergency department with severe headache and back pain. Imaging studies showed cerebral SAH in parietal lobe and spinal SAH in thoracolumbar level. Spinal angiography revealed a small pearl and string-like aneurysm of the Adamkiewicz artery at the T12 level. One month after onset, her back pain aggravated, and follow-up imaging study showed arachnoiditis. Two months after onset, her symptoms improved, and follow-up imaging study showed resolution of SAH. The present case of spinal SAH due to rupture of dissecting aneurysm of the Adamkiewicz artery underwent subsequent spontaneous resolution, indicating that the wait-and-see strategy may provide adequate treatment option.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.964-968
• /
• 1996

The demands of size and quality of large steel shaft forgings for ship building, power plant, steel plant, etc. are rapidly increasing, and some of these productions are manufactured from ingot weighing more than 300 tons. For use as rotating components. shafts require toughness, strength and homogeneity, and therefore are produced through a variety of heat treatments. According to the increase of ingot size, micro- and macrosegregation and also mass effect of the product increase. Thus, special care should be paid to the heat treatment of such large shaft forgings. In this paper, the heat treatment of large shaft forgings such as rotor and back-up roll is calculated using the commercial finite element code SYSWELD. Calculated distributions of temperature and phase are compared with experimental data. The continuous cooling transformation diagram, thermal and mechanical properites of each phase are used. The phase proportion, hardness and residual stress during water quenching are discussed.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.1
• /
• pp.58-67
• /
• 1987

By use of the real recorded data obtained from a power plant, nonlinear low-order state space models are developed for an once-through type power plant boiler. In order to understand the boiler dynamics and to use for the back-up controller design, the unknown model parameters have been estimated using the nonlinear estimation technique, i.e. Extended Kalman Filter method. It is shown that the simulation results coincide with the measurement data within 5% relative error range, which are acceptable from a back-up controller design point of view.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.305-309
• /
• 2003

In recent large power plants, the excitation system has the static type, which is characterized by the fast response to increase the transient stability. The high capacity excitation systems developed in KEPRI is either a hot back-up, hybrid hot back-up (analog + digital) or triple modular redundant digital type, both well proven by actual tests and applied in commercial operation. The large excitation systems have been developed taking into consideration the parameters of large scale power plants, resulting in high costs and subsequently are supplied at higher prices. When used at small sized power plants, the cost impact is relatively high. As a countermeasure to such a situation, KEPRI has recently developed a reliable, miniature digital excitation system, which is one-board type, convenient and adequate for low-price, small-sized (0.5MW∼200MW) power plants.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.28-34
• /
• 1987

As a means of improving the reliability of a process control system, a FTCS(Fault Tolerant Control System) is designed and applied to the boiler controller of a thermal power plant. The proposed FTCS has capabilities of fault detection and diagnosis as well as back-up control and bumpless switching. A prototype of FTCS is implemented on an IBM PC as an add-on system and it is experimentally verified by using a boiler process simulator together with simplified analog controllers and a switching unit that an one-fold fault is detected in real time and back-up controller takes over the role of the original controller, controlling the faulty loop.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.6
• /
• pp.734-742
• /
• 2001

Objective : To evaluate the role of anterior lumbar interbody fusion in treatment of failed back surgery syndrome, the authors retrospectively analyzed the result of anterior lumbar interbody fusion performed in our institute. Methods : Fifteen FBSS patients due to variable causes have been treated with anterior lumbar interbody fusion in our institute from April 1994 to June 1999. We analyzed clinical changes in 15 patients who were followed up for an average of 23 months. Results : The etiologies of FBSS were post operative discitis(6 cases), post operative instability(3 cases), post operative adhesion(5 cases), and recurrence(1 case). These fifteen FBSS patients were treated with anterior lumbar interbody fusion. The overall treatment outcome was satisfactory(excellent and good) in 11 cases. Three patients were slightly improved, but post operative low back pain was remained. One patient who had underwent nerve root injury due to pedicle screw insertion showed no improvement. Conclusion : We conclude that the anterior lumbar interbody fusion for FBSS seems to be safe and favorable treatment in selective patients, because low incidence of nerve injury risk and post-operative infection.

• The Research Journal of the Costume Culture
• /
• v.19 no.5
• /
• pp.1049-1060
• /
• 2011

The purpose of this study was to develop a shirt pattern that enhances the functionality of golf swing motions. The pattern was made with 3D body surface shape data that changed according to dynamic golf postures. The data were collected from the golf swing motions. The 3D body surface data in golf swing postures piled up on the 3D surface data in a static posture. The results showed that the surface shape data changed more in the address, back swing, and finish postures than the other swing postures. The experimental pattern was developed with 3D surface scan data in those three golf swing motions. The pattern had raglan sleeves and the front-bodied piece was divided into two pieces with a princess line, which comes from armscye line of the address posture. The back bodice piece was divided into three pieces with a yoke line and a back princess line. The yoke line was made by back shoulder shape in the back swing posture. The level of comfort of the experimental garment and commercial golf shirts was evaluated by 38 women golfers. The experimental garment pattern was evaluated to be more comfortable in golf swing postures than commercial golf shirts.