• 제목/요약/키워드: Back treatment

검색결과 1,961건 처리시간 0.033초

한우 등심의 지방산 유전특성 분석을 위한 유전모수 추정 (Estimation of Genetic Parameters for Characterization of Carcass Traits and Fatty Acid in Hanwoo)

  • 김현권;선두원;주선태;이정규
    • 농업생명과학연구
    • /
    • 제53권4호
    • /
    • pp.55-59
    • /
    • 2019
  • 한우는 도체형질의 개량으로 높은 개량의 효과를 보이고 있다. 특히 한우의 육질은 등급이 높을수록 식감과 맛이 좋다고 알려져 있기 때문에 가격을 결정하는 핵심적인 요소이다. 식육에서 맛을 결정하는 여러 가지 요인 중 크게 작용하는 부분 중 하나가 풍미이다. 식육의 풍미는 열처리를 통해 발현되고 풍미에 중요하게 영향을 미치는 성분은 지방, 탄수화물 및 수용성 비단백질 물질들이다. 이에 본 연구는 풍미에 영향을 미치는 지방산의 특성을 알아보고 높은 가치의 식육 생산을 위한 개량방향을 제시하기 위해 한우 후대검정우 373두의 등심을 채취하여 지방산과 도체형질의 특성을 알아보았다. 도체중, 배최장근단면적, 등지방두께, 근내지방도의 성적은 각각 383.73 kg, 83.88 ㎠, 10.91 mm, 3.89로 나타났고 한우 등심의 oleic acid (C18:1)와 Linolenic acid (C18:3)의 조성비율은 각각 48.08%와 0.11%로 나타났다. Oleic acid의 유전력은 0.726으로 추정되었고 배최장근단면적과 근내지방도와의 표현형 상관이 각각 0.105와 0.141로 추정되었다. 근내지방도와 배최장근단면적의 표현형은 Oleic acid와 정의 상관을 나타내고 있는 것으로 보아 이 두 형질의 개량은 불포화 지방산 함유량의 증가에도 영향을 미쳐 우수한 풍미를 가진 개체가 생산될 확률이 높아질 것이라고 사료된다.

지혈제의 종류에 따른 레진 강화형 글라스아이오노머 시멘트 결합력의 차이 (Difference in Bonding Strength of RMGIC according to Type of Hemostatic Agent in Primary Tooth)

  • 백설아;이준행;김종빈;한미란;김종수
    • 대한소아치과학회지
    • /
    • 제48권4호
    • /
    • pp.460-466
    • /
    • 2021
  • 이 연구의 목적은 유치의 상아질면에서 염화알루미늄 지혈제와 황화철 지혈제의 적용이 레진강화형 글라스아이오노머(RMGIC)의 결합에 미치는 영향을 전단결합강도를 통하여 평가하는 것이다. 20개의 우식이 없는 유구치가 이용되었으며 상아질이 노출되도록 시편을 제작하여 지혈제의 종류에 따라 3개의 군으로 분류하였다. I군은 치면에 25% polyacrylic acid(PAA)를 10초간 사용한 군, II군은 21.3% 염화알루미늄 지혈제를 1분간 사용한 뒤 PAA를 10초간 적용한 군, III군은 20% 황화철 지혈제를 1분간 사용한 뒤 PAA를 10초간 적용한 군으로 설정하였다. 각 군당 10개의 시편에 RMGIC를 중합하여 전단결합강도를 측정하였다. 결합강도는 I군이 10.07 ± 1.83 MPa, 2군에서 7.62 ± 0.78 MPa, 3군에서 5.23 ± 0.78 MPa였다. 모든 군의 결합강도는 유의한 차이를 보였다. 이 연구를 통해 염화알루미늄 지혈제, 황화철 지혈제 모두 상아질에서 RMGIC의 전단결합강도를 감소시키며 황화철 지혈제가 염화알루미늄 지혈제보다 RMGIC의 전단 결합강도를 더 많이 감소시키는 것을 알 수 있었다.

하악 편측 소수 잔존치를 갖는 환자에서 임플란트 지지 가철성 국소의치 수복 증례 (A case of implant-supported removable partial denture in a patient with mandibular unilateral residual tooth)

  • 박지산;이근우;이용상;방주혁;장희원;김성아
    • 대한치과보철학회지
    • /
    • 제60권1호
    • /
    • pp.19-28
    • /
    • 2022
  • 가철성 국소의치에서 지대치는 국소의치의 지지, 유지, 안정에 필수적으로, 기능적인 의치 제작의 중요한 요소이다. 치주적으로 건전한 지대치가 충분하고 양측으로 위치할 경우 기능적인 의치 제작이 용이 하겠지만, 지대치가 부족하거나 편측에 위치하는 경우에는 생역학적으로 불리하여 기능적인 의치를 만들기가 상대적으로 어렵다. 한편, 최근에는 임플란트 서베이드 크라운을 이용해 지지, 유지, 안정 세 요소를 보강하는 임플란트 지지 국소의치가 치료 계획으로 많이 선택되고 있다. 특히, 소수 잔존치만 남은 경우에 임플란트 서베이드 크라운을 추가함으로써 저작 능률, 심미, 환자의 편안감, 발음의 개선 등을 얻을 수 있다. 본 증례는 하악에 편측 소수 잔존 지대치를 갖는 환자에서 반대편 소구치부에 임플란트 서베이드 크라운을 추가하여 양측성 후방연장 국소의치를 제작하였다. 지대치의 비대칭성을 해소하였고, 환자와 술자 모두 만족하는 결과를 얻었기에 본 증례를 보고하는 바이다.

A Novel Therapeutic Effect of a New Variant of CTLA4-Ig with Four Antennas That Are Terminally Capped with Sialic Acid in the CTLA4 Region

  • Piao, Yongwei;Yun, So Yoon;Kim, Hee Soo;Park, Bo Kyung;Ha, Hae Chan;Fu, Zhicheng;Jang, Ji Min;Back, Moon Jung;Shin, In Chul;Won, Jong Hoon;Kim, Dae Kyong
    • Biomolecules & Therapeutics
    • /
    • 제30권6호
    • /
    • pp.529-539
    • /
    • 2022
  • Rheumatoid arthritis (RA) is a multifactorial immune-mediated disease, the pathogenesis of which involves different cell types. T-cell activation plays an important role in RA. Therefore, inhibiting T-cell activation is one of the current therapeutic strategies. Cytotoxic T-lymphocyte antigen 4-immunoglobulin (CTLA4-Ig), also known as abatacept, reduces cytokine secretion by inhibiting T-cell activation. To achieve a homeostatic therapeutic effect, CTLA4-Ig has to be administered repeatedly over several weeks, which limits its applicability in RA treatment. To overcome this limitation, we increased the number of sialic acid-capped antennas by genetically engineering the CTLA4 region to increase the therapeutic effect of CTLA4-Ig. N-acetylglucosaminyltransferase (GnT) and α2,6-sialyltransferase (α2,6-ST) were co-overexpressed in Chinese hamster ovary (CHO) cells to generate a highly sialylated CTLA4-Ig fusion protein, named ST6. The therapeutic and immunogenic effects of ST6 and CTLA4-Ig were compared. ST6 dose-dependently decreased paw edema in a mouse model of collagen-induced arthritis and reduced cytokine levels in a co-culture cell assay in a similar manner to CTLA4-Ig. ST6- and CTLA4-Ig-induced T cell-derived cytokines were examined in CD4 T cells isolated from peripheral blood mononuclear cells after cell killing through irradiation followed by flow- and magnetic-bead-assisted separation. Interestingly, compared to CTLA4-Ig, ST6 was substantially less immunogenic and more stable and durable. Our data suggest that ST6 can serve as a novel, less immunogenic therapeutic strategy for patients with RA.

정맥검출기의 NIR LED 수량에 따른 검출된 정맥 이미지 비교에 관한 연구 (A Study on the Comparison of Detected Vein Images by NIR LED Quantity of Vein Detector)

  • 조재현;정진형;김승훈;이상식
    • 한국정보전자통신기술학회논문지
    • /
    • 제15권6호
    • /
    • pp.485-491
    • /
    • 2022
  • 정맥주사는 입원환자에게 가장 빈번하게 행해지는 침습적 처치로서 비경구 영양투여, 혈액제제 등의 투입 등에 광범위하게 이용되고 있으며 이외에도 말초 카테터 삽입, 채혈, 기타 IV 요법에 사용되는 시술로서 연간 10억 건 이상이 발생한다. 정맥주사는 정맥주사 교육을 받은 숙련된 간호사들에 의해서만 시술되는 어려운 시술 중에 하나이며 실패 시 정맥에 혈전증 및 혈종이나 신경 손상 등을 초래할 수 있다. 이에 정맥주사 시 실수를 줄이기 위해 손등이나 팔의 정맥 구조를 시각화할 수 있는 보조 장비들에 대한 연구들이 발표되고 있다. 본 연구는 정맥주사 시 정맥을 시각화하는 정맥 검출기에 850nm 파장대를 조사하는 LED의 수량에 따른 성능 차이에 대한 연구이다. 피부 위에 조사된 NIR 검출기능이 있는 CCD 및 CMOS 카메라 렌즈에 NIR Filter 부착하여 영상을 획득하고 획득된 영상을 영상처리 알고리즘을 통해 정맥 이미지를 선명화하고 선명화된 이미지를 피부 위에 투영하는 원리로 작동되는 정맥 검출기를 제작한 이후 제작된 정맥 검출기 앞단에 NIR LED 수량에 차이를 주어 4가지 LED PCB를 제작했다. 이후 각각의 PCB를 정맥 검출기 앞단에 부착하여 정맥 영상을 검출하고 성능평가를 위해 획득한 정맥 영상을 바탕으로 성능 비교 설문지를 만들어 설문을 실시했다. 설문은 K병원에 재직 중인 간호사 20명을 대상으로 진행했다.

인공수정 횟수가 모돈의 번식성적에 미치는 영향 (Effect of Artificial Insemination Frequency on Reproductive Performance in Sows)

  • 홍진수;김송산;방림호;김유용
    • 농업생명과학연구
    • /
    • 제50권5호
    • /
    • pp.183-188
    • /
    • 2016
  • 본 연구는 인공수정 횟수가 모돈의 번식성적에 미치는 영향을 알아보기 위하여 수행되었다. 총 48두의 F1 모돈(Yorkshire×Landrace)을 공시하였으며, 완전임의화배치법(CRD)에 의하여 4개의 처리구에 배치되었다. 처리구는 인공수정 횟수(1회, 2회, 3회, 4회)이며, 발정확인 후 12시간 뒤부터 인공수정을 진행하였다. 모돈의 발정확인은 9시와 21시에 웅돈을 접촉시켜서 확인하였으며, 재귀발정일은 5-6일인 모돈들을 대상으로 구배치 하였다. 모돈의 승가허용 확인 후 12시간 간격에 따라 9시와 21시에 처리구에 따른 인공수정을 실시하였다. 인공수정 횟수가 모돈의 임신율, 수태율에는 유의적인 영향을 미치지 않으며, 분만율에서는 3회 인공수정한 처리구가 다른 처리구들에 비해 낮은 수치를 보였다. 총산자수, 생시자돈수, 복당체중과 같은 분만성적에서도 인공수정 횟수에 따른 통계적 차이는 나타나지 않았다. 인공수정 횟수의 1회 감소는 7,000원의 정액비용을 절감할 수 있다. 따라서 발정확인 후 인공수정을 1회하여도 다른 처리구들과 비교해 동일한 번식성적을 가지며, 1회 인공수정을 통한 정액비용의 감소는 농가의 생산비를 절감할 수 있을 것으로 사료된다.

Use of custom glenoid components for reverse total shoulder arthroplasty

  • Punyawat Apiwatanakul;Prashant Meshram;Andrew B. Harris;Joel Bervell;Piotr Lukasiewicz;Ridge Maxson;Matthew J. Best;Edward G. McFarland
    • Clinics in Shoulder and Elbow
    • /
    • 제26권4호
    • /
    • pp.343-350
    • /
    • 2023
  • Background: Our purpose was to evaluate a custom reverse total shoulder arthroplasty glenoid baseplate for severe glenoid deficiency, emphasizing the challenges with this approach, including short-term clinical and radiographic outcomes and complications. Methods: This was a single-institution, retrospective series of 29 patients between January 2017 and December 2022 for whom a custom glenoid component was created for extensive glenoid bone loss. Patients were evaluated preoperatively and at intervals for up to 5 years. All received preoperative physical examinations, plain radiographs, and computed tomography (CT). Intra- and postoperative complications are reported. Results: Of 29 patients, delays resulted in only undergoing surgery, and in three of those, the implant did not match the glenoid. For those three, the time from CT scan to implantation averaged 7.6 months (range, 6.1-10.7 months), compared with 5.5 months (range, 2-8.6 months) for those whose implants fit. In patients with at least 2-year follow-up (n=9), no failures occurred. Significant improvements were observed in all patient-reported outcome measures in those nine patients (American Shoulder and Elbow Score, P<0.01; Simple Shoulder Test, P=0.02; Single Assessment Numeric Evaluation, P<0.01; Western Ontario Osteoarthritis of the Shoulder Index, P<0.01). Range of motion improved for forward flexion and abduction (P=0.03 for both) and internal rotation up the back (P=0.02). Pain and satisfaction also improved (P<0.01 for both). Conclusions: Prolonged time (>6 months) from CT scan to device implantation resulted in bone loss that rendered the implants unusable. Satisfactory short-term radiographic and clinical follow-up can be achieved with a well-fitting device. Level of evidence: III.

기능적 전기 자극과 유산소 운동이 복부비만의 피하지방과 내장지방에 미치는 효과 (The Change of The Effect on The Subcutaneous Fat Area and Visceral Fat Area by The Functional Electrical Stimulation and Aerobic Exercise)

  • 오성태;이문환;박래준
    • The Journal of Korean Physical Therapy
    • /
    • 제16권1호
    • /
    • pp.85-123
    • /
    • 2004
  • Back ground : Subcutaneous fat area is the main factor involved in replacement disease and arteriosclerosis. Simple weight control is the appropriate medical treatment. It's understood that weight reduction does not only reduce the fat concentrations in blood but also reduces blood pressure, improves glucose levels in diabetes patients and reduces incidents of heart disease. there are several methods for reducing fat in the abdominal region but their effectiveness is not folly understood. one method is electrical stimulation of the problem areas. Method : From May 1st 2002 to October 31st. The 15 subjects who received medical examination were aged between 25 and 53 and were of mixed gender. The subjects were divided into two groups one to received functional electrical stimulation and the other a control group. Using Broca's criterion for judging fat grades. I analysed the differences between the two groups before and after the treatment. Subjects received functional electrical stimulation on the abdominal muscle intensity 50Hz. They received this treatment 4 days a week for 40 minutes a day. In the case of aerobic exercise, at the Treadmill, we used it with the intensity of $75\%$ maximum heart rate (220-age). Result 1)After functional electrical stimulation in the case of male subjects, the weight was reduced 1.93kg, obesity $2.60\%$, fat mass 2.73kg, Percent body fat $4.40\%$, waist circumference 6.53cm, circumference of hips 5.53cm. On the other side, the quality of muscle was increased at the rate of 1.03kg, but it's not attentional level. The subcutaneous fat area was reduced by $26.63cm^2$, the visceral fat area was reduced by $43.00cm^2$, In the female subjects, we can see the reduction of fat grade by $26.63cm^2$, the quantity of body fat by 1.5kg, percent body fat by $1.77\%$, circumference of waist by 4.02cm, circumference of hips by 3.67cm, weight by 1.40kg but was increased 0.72kg at the quantity of muscles. We can see the reduction also in the subcutaneous fat area $24.03cm^2$, the visceral fat area by $25.36cm^2$. 2)After aerobic exercise, on the male subjects, we can see reduction of weight by 3.36kg, obesity by $4.00\%$, fat mass by 2.83kg and we can see increase at the soft lean mass by 2.96kg, but we can see reduction, the percent body fat by $3.03\%$, fat distribution by $0.023\%$, circumference of waist by 3.10cm, circumference of hips by 2.23cm. The female subjects show a reduction in the weight by 2.48kg, percent body fat by $2.20\%$, show an increase in the soft lean mass by 1.54kg. We can see a reduction in the quantity of fat mass by 2.32kg, the percent body fat by $2.80\%$, the circumference of waist by 2.16cm, the circumference of hips by 2.68cm, the fat distribution by $0.016\%$, the subcutaneous fat area by $15.25cm^2$ the visceral fat area by $11.52cm^2$. After aerobic exercise, we can't see the attentional change at the total cholesterol, triglyceride, high density lipoprotein cholesterol, low density lipoprotein cholesterol. 3)After the application of functional electrical stimulation and aerobic exercise, in result of measurement on the body ingredient, we could see the weight reduction and increase the quantity of muscle with the male group who exercised aerobic. We can see the attentional rate on the electrical stimulation about abdominal fat rate, circumference of waist, circumference of hips. The other hand, I couldn't see the attentional differences between the two groups in the rate of fatness and quantity of body fat and the rate of body fat. There isn't any attentional difference in the area of fat under skin, on the contrary, There is attentional difference in the fat in the internal organs area at the electrical stimulation site. We can't see the attentional change of total cholesterol, triglyceride, high density lipoprotein cholesterol, low density lipoprotein cholesterol between electrical stimulation and aerobic exercise. 4)After execution of functional electrical stimulation and aerobic exercise, in result of measurement on change of body ingredient among female objects, We could see weight reduction, increase at muscle quantity in the aerobic exercise group. We could see the attentional differences in the rate of fatness, the rate of abdominal region, the circumference which received electrical stimulation. But, we couldn't see the attentional differences between two groups in the quantity of body fatness, the circumference of hips. The subcutaneous fat area doesn't show the attentional differences. On the Contrary, we could see lots of differences in the visceral fat area of the electrical stimulation group. Conclusion The results show that functional electrical stimulation and aerobic exercise have insignificant differences when if comes to total cholesterol, triglyceride, high density lipoprotein cholesterol, low density lipoprotein cholesterol. Though there is affirmative change in body ingredient after both electrical stimulation and aerobic exercise. Functional electrical stimulation is more effective on the subcutaneous fat area and in changing visceral fat area. There fore. It is concluded that the physical therapy is more effective in the treatment of abdominal fatness.

  • PDF

식도암 세기조절방사선치료와 용적세기조절회전치료에 대한 Jaw-Tracking의 유용성 평가 (Effectiveness Assessment on Jaw-Tracking in Intensity Modulated Radiation Therapy and Volumetric Modulated Arc Therapy for Esophageal Cancer)

  • 오현택;유순미;전수동;김민수;송흥권;윤인하;백금문
    • 대한방사선치료학회지
    • /
    • 제31권1호
    • /
    • pp.33-41
    • /
    • 2019
  • 목 적: 식도암 방사선치료 시 세기조절방사선치료(Intensity Modulated Radiation Therapy, IMRT) 및 용적세기조절회전치료(Volumetric Modulated Arc Therapy, VMAT)에서 Jaw-Tracking 기법 유 무에 따라 저선량 영역에 대한 주변 정상장기의 용적선량을 분석하여 그 유용성을 평가하고자 한다. 대상 및 방법: 본 원에서 사용하고 있는 선형가속기 VitalBeamTM(Varian Medical System, U.S.A)으로 식도암 방사선치료를 받은 27명을 대상으로 하였으며, 치료계획은 Eclipse(Ver. 13.6 Varian, U.S.A)를 이용하여 Jaw-Tracking(JT)을 사용한 치료계획과 Non Jaw-Tracking(NJT) 치료계획을 수립하였으며, 치료계획용적(Planning Target Volume, PTV)에 빗장위림프절(Supraclavicular Lymph Nodes, SCL)이 포함되어 있는 T자형 PTV를 가진 환자를 대상으로 하였다. 조사범위에 대한 영향을 확인하기 위해 복강(Celiac) 포함 여부로 비교군을 나누었다. 수립된 치료계획의 비교를 위해 손상위험장기는 양측 폐, 심장, 척수를 비교하였으며 Conformity Index(CI), Homogeneity Index(HI)를 비교하였다. 임상적용 검증을 위해 전자포탈영상장치(Electronic Portal Imaging Device, EPID)를 이용하여 Portal Dosimetry를 실시하였고, 선량 영역의 임계치(Threshold)를 10 %, 5 %, 0 %로 매개변수로 설정하여 감마분석을 실시하였다. 결 과: 모든 치료계획은 3 mm / 3 %, 감마통과율 95 % 기준에 대해 Threshold 10 %의 경우 95 % 이상으로 JT, NJT 모두 통과하였으며, IMRT는 Threshold가 5 %, 0 %로 줄어들수록 JT보다 NJT의 값이 1 % 이상 줄어 들었다. IMRT에서 양측 폐의 $V_5$$V_{10}$은 JT에서 Celiac을 포함하지 않을 때 최대 14.7 %, 평균 8.5 %, 5.3 % 만큼 감소했고, $D_{mean}$$72.3{\pm}51cGy$ 감소하였으며, Celiac을 포함할 때 JT에서 선량감소가 증가하였다. 심장의 $D_{mean}$$68.9{\pm}38.5cGy$, 척수의 $D_{max}$$39.7{\pm]30.1cGy$만큼 감소하였다. VMAT은 JT기법 사용 시 폐에서 $V_5$ 평균 2.5 % 감소하였고, 심장 및 척수에서 소량 감소하였으며, Celiac 포함 시 JT의 선량감소가 증가하였다. 결 론: 식도암 치료계획에서 IMRT가 JT 사용 시 양측 폐의 $V_5$, $V_{10}$에서 유의미한 감소가 나타났고, 저 선량영역에서 조사범위가 클수록 선량감소가 크게 나타났다. 따라서 식도암 방사선치료에는 IMRT가 VMAT보다 JT 적용 시 더 효과적이며, 저 선량영역에서의 MLC 누설 및 투과선량으로부터 정상장기를 보호할 수 있다.

자비(煮沸), 증자(蒸煮) 및 약제처리(藥劑處理)가 상수리나무와 소나무의 휨가공성(加工性)에 미치는 영향(影響) (Effects of Boliing, Steaming, and Chemical Treatment on Solid Wood Bending of Quercus acutissima Carr. and Pinus densiflora S. et. Z.)

  • 소원택
    • Journal of the Korean Wood Science and Technology
    • /
    • 제13권1호
    • /
    • pp.19-62
    • /
    • 1985
  • 본(本) 시험(試驗)은 국내(國內) 활엽수로서 중요한 참나무속(屬)의 상수리나무와 침엽수(針葉樹)의 대표적(代表的) 수종(樹種)인 소나무를 공시목(公試木)으로 선정(選定)하여 곡목가공분야(曲木加工分野)에서 널리 이용(利用)하는 자비법(煮沸法)과 증자법(蒸煮法)에 의한 휨가공성(加工性)을 조사(調査)하고, 이에 관련(關聯)된 인자(因子)로서 변(邊) 심재(心材), 연륜각도(年輪角度), 연화처리온도(軟化處理溫度), 연화처리시간(軟化處理時間), 목재함수율(木材含水率) 및 목재결함(木材缺陷) 등(等)의 영향(影響)과 휨가공(加工)후의 곡율반경변화(曲率半經變化) 및 약제처리(藥劑處理)에 의한 휨가공성(加工性)의 개선방법(改善方法)을 구명(究明)하기 위하여 실시(實施)되었다. 이 때 사용(使用)된 자비(煮沸)와 증자처리용(蒸煮處理用) 시편(試片)의 크기는 두께와 너비 15mm, 길이 350mm이고 약제처리용시편(藥劑處理試片)의 크기는 두께 5mm, 너비 10mm 및 길이 200mm로 제작(製作)하였으며, 시편(試片)의 함수율(含水率)은 자비처리(煮沸處理)에는 생재(生材)를 사용(使用)하고 증자처리(蒸煮處理)에는 15%로 조습(調濕)된 건조재(乾燥材)를 사용(使用)하였다. 또한 약제처리(藥劑處理)는 포화요소용액(飽和尿素溶液), 35% 포르말린 용액(溶液), 25% 폴리에칠렌(400) 수용액(水溶液) 및 25% 암모니아수에 5일간(日間) 상온(常溫)으로 침지(浸漬)한 우 휨가공(加工)을 행하였다. 본(本) 시험(試驗)에서 얻은 결과(結果)를 요약(要約)하면 다음과 같다. 1. 상수리나무와 소나무의 목재내부온도(木材內部溫度)는 자비(煮沸) 또는 증자처리시간(蒸煮處理時間)에 따라 초기(初期) 약(約) $30^{\circ}C$까지 완만(緩慢)한 상승(上昇)을 보이다가 그 후 직선적(直線的)으로 급상승(急上昇)하며 후기(後期) $80{\sim}90^{\circ}C$부터는 다시 완만(緩慢)해지는 경향(傾向)을 나타냈다. 2. 최종온도(最終溫度) $100^{\circ}C$까지 도달(到達)하는 데 소요(所要)되는 연화처리시간(軟化處理時間)은 목재(木材)의 두께에 비례(比例)하며 두께 15mm 각재(角材)에 대한 $25^{\circ}C$에서 $100^{\circ}C$까지의 소요시간(所要時間)은 상수리나무 9.6~11.2분(分), 소나무 7.6~8.1분(分)으로서 소나무의 연화속도(軟化速度)가 보다 빠르게 나타났다. 3. 증자처리시간(蒸煮處理時間)의 경과(經過)에 따른 목재(木材)의 함수율증가경향(含水率增加傾向)은 처음 약(約)4분(分)까지 급증(急增)하나 그후 점차(漸次) 둔화(鈍化)되어 상수리나무는 20분(分), 소나무는 15분경(分頃)부터 거의 직선적(直線的)으로 완만(緩慢)하게 증가(增加)하는 경향(傾向)을 나타냈다. 두께 15mm 각재(角材)에 대한 초기함수율(初期含水率) 15%에서 50분간(分間) 증자처리(蒸煮處理) 후의 함수율증가량(含水率增加量)은 상수리나무 3.6%, 소나무 7.4%로서 소나무의 흡습속도(吸濕速度)가 빠르게 나타났다. 4. 자비처리시간(煮沸處理時間)이 경과(經過)함에 따라 두 수종(樹種) 모두 기계적(機械的) 성질(性質)이 현저하게 감소(減少)하였으며, 60분간(分間) 자비처리(煮沸處理)에 의한 기계적(機械的) 성질(性質)의 감소율)減少率)은 압축강도(壓縮强度) 35.6~45.0%, 인장간도(引張强度) 12.5~17.5%, 휨강도(强度) 31.6~40.9% 및 휨탄성계수(彈性係數) 23.3~34.6%로 나타났다. 5. 변재(邊材)와 심재별(心材別) 최소곡률반경(最小曲律半徑)은 각각(各各) 상수리나무에서 60~80mm 및 90mm, 소나무에서 260~300mm 및 280~300mm로 두 수종(樹種) 모두 변재(邊材)의 휨가공성(加工性)이 양호하였다. 6. 상수리나무의 정목재(柾木材)와 판목재별(板目材別) 최소곡률반경(最小曲律半徑)은 모두 60~80mm로서 차이(差異)가 없었으나 소나무에서는 각각(各各) 240~280mm 및 260~300mm로 정목재(柾木材) 휨가공성(加工性)이 양호하였다. 7. 연화처리온도(軟化處理溫度)가 증가(增加)할수록 상수리나무와 소나무 모두 휨가공성(加工性)이 향상(向上)되었으며 휨가공(加工)을 위한 최저처리온도(最低處理溫度)는 각각(各各) $90^{\circ}C$$80^{\circ}C$로서 처리온도(處理溫度)에 대한 의존도(依存度)는 상수리나무에서 약간 높게 나타났다. 8. 연화처리시간(軟化處理時間)이 증가(增加)할수록 상승온도(上昇溫度)와 상응(相應)하여 휨가공성(加工性)을 향상(向上)시켰으나 최종온도(最終溫度)에 도달(到達)한 후에도 계속 연화(軟化)을 지속(持續)해야 비로서 최적연화상태(最適軟化狀態)를 나타냈다. 휨가공(加工)을 위한 최소처리시간(最少處理時間) 두께 15mm 각재(角材)에 대하여 상수리나무에서 자비처리시(煮沸處理時) 10분(分), 증자처리시(蒸煮處理時) 30분(分) 및 소나무에서 자비처리시(煮沸處理時) 10분(分), 증자처리시(蒸煮處理時) 20분(分)으로 나타났다. 9. 휨가공(加工)을 위한 상수리나무의 적정함수율(適定含水率)은 20%로 나타났으며 섬유포화점(纖維飽和點) 이상(以上)에서는 오히려 휨가공성(加工性)이 저하(低下)되었다. 반면(反面)에 소나무의 적정함수율(適定含水率)은 30% 이상(以上)을 필요(必要)로 하였다. 10. 본(本) 시험(試驗)에서 얻은 최적조건(最適條件)(Table 19)으로 휨가공(加工)을 실시(實施)한 결과(結果) 상수리나무의 최소곡률반경(最小曲律半徑)은 자비처리시(煮沸處理時) 80 mm, 증자처리시(蒸煮處理時) 50 mm이고 소나무에서는 자비처리시(煮沸處理時) 240 mm, 증자처리시(蒸煮處理時) 280 mm로서 상수리나무는 증자처리(蒸煮處理)의 연화효과(軟化效果)가 양호하였으나 소나무는 자비처리(煮沸處理)가 양호하였다. 11. 인장대철(引張帶鐵) 사용(使用)하지 않았을 경우 상수리나무와 소나무의 시편(試片)두께(t)와 최소곡률반경(最小曲律半徑)(r)의 비(比)(r/t)는 각각(各各) 자비처리시(煮沸處理時) 16.0 및 21.3, 증자처리시(蒸煮處理時) 17.3 및 24.0으로 나타났으나 인장대철(引張帶鐵) 사용(使用)하였을 때는 각각(各各) 자비처리시(煮沸處理時) 5.3 및 16.0, 증자처리시(蒸煮處理時) 3.3 및 18.7로서 휨가공성(加工性)의 현저한 향상(向上)을 나타냈다. 12. 미소(微小)한 옹이의 위치별(位置別) 상수리나무의 휨가공성(加工性)에 미치는 영향(影響)은 매우 심하게 나타났는 데 특히 옹이의 의치(位置)를 휨재(材)의 압축측(壓縮側)에 두고 곡률반경(曲律半徑) 100 mm로 휨가공(加工)하였을 때는 파양율(破壤率)이 90%로서 거의 휨가공(加工)이 불가능(不可能)하였다. 그러나 옹이를 인장측(引張側)에 두었을 경우에는 파양율(破壤率)이 10%에 불과(不過)하였다. 13. 곡률반경(曲律半徑) 300 mm로 휨가공(加工) 후 30 일간(日間) 실내조건(室內條件)에서 방치(放置)하였을 때의 곡률반경변화율(曲律半徑變化率)은 자비처리시(煮沸處理時) 4.0~10.3%, 증자처리시(蒸煮處理時) 13.0~15.0%로서 증자처리(蒸煮處理)에 의한 복원현상(復元現象)이 자비처리(煮沸處理)보다 심하게 나타났으며 에폭시수지(樹脂)를 도포(塗布)하여 방습처리(防濕處理) 하였을 경우에는 곡률반경변화율(曲律半徑變化率)이 -10~0%에 불과(不過)하였다. 14. 약제처리(藥劑處理)에 의한 가소성(可塑性) 효과(效果)는 35% 포르말린 용액(溶液)과 25% 폴리에칠렌 글리콜(400) 수용액(水溶液)에서는 나타나지 않았고 포화요소용액(飽和尿素溶液)과 25% 암모니아수에서는 나타났으나 증자처리(蒸煮處理)의 효과(效果)에는 미치지 못하였다. 그러나 약제처리(藥劑處理) 후 증자처리(蒸煮處理)를 병용실시(倂用實施)하였을 때는 증자처리(蒸煮處理)보다 10~24% 휨가공성(加工性)이 향상(向上)되었다. 15. 소서계수(塑性係數)와 곡률반경(曲律半徑)과의 관계(關係)는 하중(荷重)-변형계수(變形係數), 변형계수(變形係數) 및 에너지계수(係數) 모두 1% 수준(水準)에서 유의적(有意的)인 상관(相關)이 인정(認定)되므로 휨 가공용재(加工用材)의 품질지표(品質指標)로서 적합(適合)하였고 적합도(適合度)는 하중(荷重)-변형계수(變形係數), 에너지계수(係數) 및 변형계수(變形係數)의 순(順)으로 크게 나타났다.

  • PDF