• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1564-1565
• /
• 2007

In comparison with CCFL, LED can have more various colours. The research into BLU to raise colour reproducibility is actively proceeding by using RGB LED. On this study, Direct BLU was designed by white LED and RGB LED. According to the result of the experiment, the colour uniformity degree of BLU model using white LED is better than RGB LED BLU. On the other hand, the colour reproducibility of RGB LED BLU is better than white LED. The research showed that the uniformity of white LED is 81.7%and RGB LED is 70.01%.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1294-1302
• /
• 2008

Talk-Back systems comprised of master-equipment at the control room and slave-equipment at turnouts refer to the intercommunication facilities that optimize mutual communication between maintenance staff on trackside and the control room to facilitate quickness and accuracy of train operation control and its maintenance within depot and on mainlines with turnouts for direction switching of the trains in operation. The weakness lies in additional maintenance costs of cables since the Talk-Back system installed on line 1 along with line 2-4 has a profound effect on the voice quality leading to the attenuation and crosstalk of the system due to the deterioration of cables and environmental factors. This paper discusses the Talk-Back system in a radio communication environment with the application of RF(Radio Frequency) communication system from the wire communication system by cables to ameliorate these problems, and deals with the energy saving environmentally friendly facilities in consideration of replacing power section at salve-equipment with solar batteries benefitting the system in light of energy consumption.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.95-98
• /
• 2006

LCD-BLU (Back Light Unit) is one of kernel parts of LCD unit. The fabrication method of a 3-D micro mold patterned with micro-lenses for the LGP (Light Guiding Plate), one of the most important parts of LCD-BLU, was presented. Instead of dot pattern made by etching, 3-D optical pattern design with $50{\mu}m$ micro-lens was applied in the present study. The micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The positive micro-lens patterned injection mold with different aspect ratios (i.e. 0.3 and 0.4) was fabricated with modified LiGA with thermal reflow process. The brightness of LCD-BLU increased as aspect ratio of micro-lens increased.

• Korea-Australia Rheology Journal
• /
• 제19권3호
• /
• pp.171-176
• /
• 2007

LCD-BLU (Liquid Crystal Display-Back Light Unit) of medium size is usually manufactured by forming numerous dots with $50{\sim}300\;{\mu}m$ in diameter by etching process and V-grove shape with $50\;{\mu}m$ in height by mechanical cutting process. However, the surface of the etched dots is very rough due to the characteristics of the etching process and V-cutting needs rather high cost. Instead of existing optical pattern made by etching and mechanical cutting, 3-dimensional continuous micro-lens of $200\;{\mu}m$ in diameter was applied in the present study. The continuous micro-lens pattern fabricated by modified LIGA with thermal reflow process was tested to this new optical design of LGP. The manufacturing process using LIGA-reflow is made up of three stages as follows: (i) the stage of lithography, (ii) the stage of thermal reflow process and (iii) the stage of electroplating. The continuous micro-lens patterned LGP was fabricated with injection molding and its test results showed the possibility of commercial use in the future.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.502-503
• /
• 2005

본 연구에서는 TFT-LCD(Thin Film Transistor-Liquid Crystal Display)의 배경광원인 BLU(Back Light Unit)의 고효율화, 고품질화를 통한 원가 절감을 달성하기 위해 BLU의 대표적 핵심부품중에 하나인 프리즘 시트를 사용하지 않는 구조의 MNT용 BLU를 개발하는데 목적을 두었다. 고효율의 BLU를 만들기위하여 17인치 BLU의 도광판의 상, 하면에 Prism 형상을 구현하였으며, 광학적 시뮬레이션을 통하여 먼저 가능성을 검토하였고, UV에 반응하는 Resin을 경화시키는 방법을 이용하여 일반 도광판에 프리즘형상을 각인(Imprint)시키는 방법으로 실물을 재현하였다. 실험 결과 프리즘 시트를 사용하지 않는 구조의 MNT용 17인치 BLU에서 중심휘도 4,984nit, 균일도 70% 달성하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.269-272
• /
• 2008

LGP is a key component of LCD back light unit because it determines the brightness and sharpness of display image. Usually, it has optical patterns fabricated on the bottom surface. In the present paper the LiGA-reflow method was applied to fabricate the LGP mold. Furthermore, the optical simulation considering the replication ratio of pattern height was applied to the pattern design. The optical simulation through systematic correction scheme helped find the optimum distribution of pattern density. Finally, the stamper fabricated by this method was installed in the mold and LGP was produced by injection molding. As a result of luminance measurement for the final product, the average luminance and luminance uniformity was measured 3,180 nit and 84%, respectively. Consequently, the mold fabrication method using the LiGA-reflow and optical simulation(CAE) can save the expense and time compared with the existing fabrication methods(laser ablation and chemical etching).

• E2M - 전기 전자와 첨단 소재
• /
• 제10권7호
• /
• pp.732-736
• /
• 1997

• PNF and Movement
• /
• 제21권2호
• /
• pp.185-192
• /
• 2023

Purpose: This study aimed to confirm the effectiveness of the diaphragm stretching technique as a treatment method for low back pain by evaluating maximum inspiratory pressure, maximum expiratory pressure, and changes in back mobility in patients with low back pain. Methods: Thirty-four patients with low back pain were randomly divided into two groups: an experimental group and a control group. The diaphragm stretching technique was conducted in the experimental group, and the placebo intervention was conducted in the control group. The diaphragm stretching technique was conducted once, maintaining tension for 7 min. The placebo intervention was conducted in the same position as the diaphragm stretching technique, but with only light contact maintained without pressure. Maximum inspiratory pressure, maximum expiratory pressure, and back mobility were measured before and after the intervention, and the changes were compared and analyzed. A paired sample t-test was used to compare measurements within the group before and after the intervention. An independent t-test was used to compare the experimental and control groups. Statistical significance (α) was set at 0.05. Results: In the experimental group, maximum inspiratory pressure, maximum expiratory pressure, and back mobility increased significantly after the intervention (p < 0.05). However, there was no significant difference in the changes in all areas of the control (p > 0.05). As a result of comparative analysis of changes before and after the intervention, there were significant differences in maximum inspiratory pressure, maximum expiratory pressure, and back mobility only in the experimental group (p < 0.05). Conclusion: The diaphragm stretching technique improved maximum inspiratory pressure, maximum expiratory pressure, and back mobility compared to the placebo intervention. Therefore, the diaphragm stretching technique can be recommended as a physical therapy intervention to improve pain in patients with LBP.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.94-96
• /
• 2001

As a batch Type device, this machine is contrive to seal glass plates for plasma BLU (Back Light Unit) by indirect heating from electric heaters. In order to maintain the heating / cooling Chambers clean, this machine uses a muffle formation. The components of the machine are listed bellow.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.318.2-318.2
• /
• 2014

The high contact resistance is still one of the major issues to be resolved in CdS/CdTe thin film solar cells. CdTe/Metal Schottky contact induced a high contact resistance in CdS/CdTe solar cells. It has been reported that the work function of CdTe thin film is more than 5.7 eV. There has not been a suitable back contact metal, because CdTe thin film has a high work function. In a few decades, some buffer layer was reported to improve a back contact problem. Buffer layers which are Te, $Sb_2Te_3$, $Cu_2Te$, ZnTe:Cu and so on was inserted between CdTe and metal electrode. A formed buffer layers made a tunnel junction. Hole carriers which was excited in CdTe film by light absorption was transported from CdTe to back metal electrode. In this report, we reported the variation of solar cell performance with different buffer layer at the back contact of CdTe thin film solar cell.