• Journal of the Korean Society of Radiology
• /
• v.5 no.5
• /
• pp.277-282
• /
• 2011

When we keep sitting for a long time, we end up with pain due to changes in the curvature in the waist. This study examined impacts from the wearing of a SPINE-GUARD(belt for the waist stabilization) on a cross-legged sit on variations of the Cobb's angle, lower back pain and trunk flexion angle. 15 men for the examination have watched movies or attended lectures while wearing a belt for 90 minutes per round for every five rounds for two weeks. The Cobb's angle showed a significant decrease from $48.36{\pm}14.57$ before wearing to $28.09{\pm}11.63$ after wearing (p<0.05). Pain decreased from $4.53{\pm}2.36$ before wearing to $2.733{\pm}2.153$ after wearing (p<0.05). The trunk flexion angle also showed a significant decrease from $82.33{\pm}20.30$ before wearing to $70.2{\pm}19.43$ after wearing (p<0.05). Given these findings, the wearing of a SPINE-GUARD seems to affect variations of the Cobb's angle and trunk flexion angle, and decrease of lower back pain.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.2
• /
• pp.35-44
• /
• 1985

The purposes of this study were, first, to investigate retention levels of toxic elements and oxide individual plies for each panel and, second, to examine disproportioning of individual toxic elements Thirty five water gum plywood panels were treated with a copper-chromium-arsenic preservative (CCA) by the soaking process as the treament time were applied. Such individual plies at a distance of 2.5cm, 7.5cm from the edge were assayed for CuO, $CrO_3$, and $As_2O_5$ on the basis of copper, chromium and arsenic content by Atomic Absorption Spectrophotometry. In these experiments, 12mm thickness plywood panels made of water gum, which were selling, were selected for the preservative treatment. Treating solutions were prepared for 10%, dilute solution of copper-chromium-arsenic preservative and then 1, 3, 6, 12 and 24 hours soaking trements in CCA preservative were applied. The results obtained are as follows: 1. The retention of total oxide in the face and back plies (1+7) retained more than the retention of total oxide in the other plies. The total oxide retention for the individual plies except the face and back plies (1+7) was showed in the following orders; cross plies (3+5), cross plies (2+6), core ply (4). 2. The retentions of total oxide increased as the increase of treatment time. The CCA treated plywood retained high levels of total oxide retention in the face and back plies (1+7). 3. All the retentions in the face and back plies (1+7) is over 5Kg/$m^3$, New Zealand Timber Preservation Standards Specification, and after 6 hours, the retentions in the cross plies (3+5) is over 4. The relative penetration of copper, chromium, and arsenic were not affected by the treatment time. The proportion of arsenic decreased in relation to both copper and chromium and the proportion of copper increased in relation to both chromium and arsenic. 5. A disproportioning of copper, chromium occurred with longer distance from edge, and with longer distance from edge the leachability resistance of CCA treated specimens decreased. After 6 hours (soaking time), the proportion of active elements at a distance of 2.5cm from the edge was consistent. And after 24 hours-soaking, the proportion of active elements at a distance of 7.5cm from the edge was consistent.

• Applied Microscopy
• /
• v.45 no.4
• /
• pp.189-194
• /
• 2015

Backside Ar ion milling technique for the preparation of cross-sectional transmission electron microscopy (TEM) specimens, and backside-ion milling combined with focused ion beam (FIB) operation for electron holography were introduced in this paper. The backside Ar ion milling technique offers advantages in preparing cross-sectional specimens having thin, smooth and uniform surfaces with low surface damages. The back-side ion milling combined with the FIB technique could be used to observe the two-dimensional p-n junction profiles in semiconductors with the sample quality sufficient for an electron holography study. These techniques have useful applications for accurate TEM analysis of the microstructure of materials or electronic devices such as arrayed hole patterns, three-dimensional integrated circuits, and also relatively thick layers (> $1{\mu}m$).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1519-1521
• /
• 2007

In this work, a coplanar-type plasma flat fluorescent lamp having cross type of electrode was fabricated by screen printing and sealing technique. Cross type of electrode with a dielectric layer were screen-printed on a rear glass plate, and then fired at $550^{\circ}C$. Phosphor was printed on and fired at $450^{\circ}C$. Finally, the lamp was sealed by frit glass at $450^{\circ}C$. The lamp of cross electrode type was studied depending on the electrode gap and the thickness of dielectric layer.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.10 no.2
• /
• pp.197-202
• /
• 2010

Multiple sclerosis is a degenerative disease prevalent in northern climates, and its cause is unknown. The histopathological lesion in multiple sclerosis is the sclerotic "plague", a discrete focus of myelin loss with maintenance of axon segments and glial proliferation. The plaques may be seen in widely different brain and spinal tissues. The common causes of low back pain are psychosomatic disorder, myofascial pain dysfunction syndrome and herniation of nucleus pulposus. Local anesthetics cross the blood-brain barrier and the signs of CNS toxicity appear at a level between 4.5 and $7.0\;{\mu}g/ml$. This is a case report of acute back pain care after mandibular block anesthesia for the surgical extraction of mandibular root rests in an old aged woman with multiple sclerosis.

• Journal of East-West Nursing Research
• /
• v.14 no.1
• /
• pp.36-43
• /
• 2008

Purpose: This study was conducted for an evidence-based nursing intervention on bed rest period after puncture, by confirming whether there was a difference in scores of headache and back pain between the 1-hour bed rest group and the 6-hour bed rest group following lumbar puncture in patients with leukemia. Method: The subjects were 45 inpatients of the department of hematology at a general hospital in Seoul, from January 1 to March 31, 2005. There were 21 patients in the 1-hour bed rest group and 24 patients in the 6-hour bed rest group. A graphic rating scale was used to measure headaches and back pains. Collected data were analyzed with SPSS 12.0. Non- parametric statistics were used to analyze the data. Results: There was no significant difference between the 1-hour bed rest group and the 6-hour bed rest group in the headache level and back pain level. Conclusion: Therefore, it is considered that a long period of bed rest over 6 hours after lumbar puncture is not a necessary nursing intervention, and repeated studies are required to confirm the result.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.64-80
• /
• 1998

The risk of cross-contamination in dental clinic is very high. Those who are engaged in dental clinic are exposed to various microorganisms in saliva and blood of patient. Potential possibility of cross-contamination of patient to patient, patient to dentist, dentist to laboratory technician always exist, which is important in the view of public health. It is well known that microorganisms may cause cross-contamination by suck-back of microorganisms into the water supply line or air supply line of dental unit and sprayed back into the next patient's oral cavity. The majority of microorganisms coming from dental unit are water microorganisms from the main water supply which have colonized the tube within the units and multiplied in the relatively warm and stagnant conditions. The purpose of this study is to measure the extent of microbial contamination of dental unit and ultrasonic scaler, to evaluate that dental unit water supply is suitable for drinking water, and to assess the effect of flushing on reduction of microbial contamination of dental unit and ultrasonic scaler. In the first experiment, water samples(50ml) from 20 dental units and 10 ultrasonic scalers in Seoul National Univ. Hosp. were tested for the presence of coliform. The samples were filtered by membrane filtration technique.(Microfil system, Millipore Co. U. S. A.) The filter was then placed onto MacConkey agar plate and the plates with filter on it were incubated aerobically at $37^{\circ}C$ for 5 days. The colors and shapes of colonies were examined if those were coliform. To verify the presence of coliform, the colonies were inoculated into phenol red lactose broth and incubated aerobically at $37^{\circ}C$ for 2 days. The fomation of gas was observed. In the second experiment, water samples from 20 handpieces, 10 ultrasonic scalers and 30 A/W syringes after 0, 2, 4, 6 min. flushing respectively were taken. $200{\mu}l$ water samples were spreaded on Brain Heart Infusion agar plate and the plates were incubated aerobically at $37^{\circ}C$ for 5 days. The number of colony was counted. The results obtained were summarized as follows 1. The water from dental unit and ultrasonic scaler was not suitable for drinking water. 2. No coliform was founded in dental unit and ultrasonic scaler water supply. 3. The number of colony of dental unit and ultrasonic scaler was highest in the group of o min. flushing(p<0.05). 4. There was no statistically significant difference in the extent of microbial contamination among handpiece, ultrasonic scaler and A/W syringe (p>0.05). 5. The number of colony was lowest in the group of 4 min. flushing, but there was no statistically significant difference among 2, 4, 6 min. flushing groups.(p>0.05) 6. It is recommended to flush dental unit water line for 4 min. after use on each patient.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.409-422
• /
• 2019

In this study, we carried out the 3D numerical simulation to investigate the hydraulic characteristics of Synchronous Edge wave known as the driving mechanism of beach cusp using the Tool Box called the ihFoam that has its roots on the OpenFoam. As a wave driver, RANS (Reynolds Averaged Navier-Stokes equation) and mass conservation equation are used. In doing so, we materialized short-crested waves known as the prerequisite for the formation of Synchronous Edge waves by generating two obliquely colliding Cnoidal waves. Numerical results show that as can be expected, flow velocity along the cross section where waves are focused are simulated to be much faster than the one along the cross section where waves are diverged. It is also shown that along the cross section where waves are focused, up-rush is moving much faster than its associated back-wash, but a duration period of up-rush is shortened, which complies the typical characteristics of nonlinear waves. On the other hand, due to the water-merging effect triggered by the redirected flow toward wave-diverging area at the pinacle of run-up, along the cross section where waves are diverged, offshore-ward velocity is larger than shore-ward velocity at the vicinity of shore-line, while at the very middle of shoaling process, the asymmetry of flow velocity leaned toward the shore is noticeably weakened. Considering that these flow characteristics can be found without exception in Synchronous Edge waves, the numerical simulation can be regarded to be successfully implemented. In doing so, new insight about how the boundary layer streaming occur are also developed.

• Physical Therapy Korea
• /
• v.27 no.1
• /
• pp.53-62
• /
• 2020

Background: Pregnancy-related low back pain (PLBP) has fewer systematic guidelines than pregnancy-related pelvic girdle pain, previous studies have not evaluated physical therapy for this ailment in Korea. Objects: We aimed to provide a detailed account of clinical decision making by Korean physiotherapists while treating PLBP. Methods: In total, 955 questionnaires were distributed mainly in places of continuing education held by the Korean Physical Therapy Association from April to July 2019. The same questionnaire was posted on a website used by physiotherapists. We collected subject information, a specific Vignette typically represent symptoms of PLBP, and responses to multiple questions about decision making, subjective recognition and interest level in the field of women's health physiotherapy (WHPT). Results: The overall response rate was 56% (n = 537); of these, responses to 520 questionnaires were analyzed. Most respondents chose various combinations of physical therapy methods. There were significant differences in subjective recognition levels of WHPT according to gender (p < 0.05), age (p < 0.01), education level (p < 0.01), and clinical experience (p < 0.05). There were significant differences in interest according to gender (p < 0.01) and education level (p < 0.01). With respect to the types of treatment, significant differences were noted in selective rates for "manual therapy", "pain control", and "supportive devices" based on gender. Manual therapy tended to be chosen more with increasing age and clinical experience. With increased education level, there were fewer choices for the use of pain control. Conclusion: This is the first data on how Korean physiotherapists manage PLBP patients using the vignette method. We were able to recognize the Korean physical therapist's decision on PLBP patients, and observed statistically significant correlations. This may aid in developing future research and education plans in the WHPT field.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.255-269
• /
• 1997

In this paper, we describe the implementation of C cross-compiler for the ES-C2340 DSP2 processor by using the GNU compiler. For the rapid and efficient developing of the compiler and other parts like the processor-dependent back -end which is implemented newly to build the compiler. This approach has several advantages. First, as we use GNU compiler's well-proved excellent optimization method and multi-language support capability, we can improve he efficiency and generality of the compiler. Second, as we concentrate on the high-level language as logic approving tool in processor developing process. And to support the cross-compiler, we also implement a text-level pre-linker.