• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1163-1167
• /
• 2003

As a PD classification method, statistical distribution parameters have been used during several ten years. And this parameters are recently finger print method, NN(Neural Network) and etc. So in this paper we studied finger print method and NN with BP(Back propagation) learning algorithm using the statistical distribution parameter, and compared with two method as classification method. As a result of comparison, classification of NN is more good result than Finger print method in respect to calculation speed, visible effect and simplicity. So, NN has more advantage as a tool for PD classification.

• 비파괴검사학회지
• /
• 제25권6호
• /
• pp.475-482
• /
• 2005

The iterative calculation by least square method was used to determine the source location of acoustic emission in rock, as so called "traditional method". The results were compared with source coordinates infered from the application of neural network system for new input data, as so called "new method". Input data of the neural network were based on the time differences of longitudinal waves arrived from acoustic emission events at each transducer, the variation of longitudinal velocities at each stress level, and the coordinates of transducer as in the traditional method. The momentum back propagation neural network system adopted to determine source location, which consists of three layers, and has twenty-seven input processing elements. Applicability of the new method were identified, since the results of source location by the application of two methods were similarly concordant.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.471-475
• /
• 2017

This study aims to suggest the methodology to improve to estimate back-calculated fish growth parameters using weighted average. It is to contribute to correct errors in the calculation of back-calculated growth equation with unequal numbers of sample by age. If the numbers of sample were evenly collected by age, each back-calculated length at age was equal between arithmetic and weighted averages. However, most samples cannot be evenly collected by age in reality because of different catchability by fishing gear and limitation of environment condition. Therefore, the estimation of back-calculated length by weighted average method is essential to calculate growth parameters. There were some published growth equations from back-calculated length using a simple arithmetic average with different numbers of samples by age when searching for back-calculated growth equations from 91 relevant papers. In this study, the process of deriving growth equation was investigated and two different average calculations were applied to a fish growth equation, for example of Acheilognathus signifer. Growth parameters, such as $L_{\infty}$, k and $t_0$, were estimated from two different back-calculated averages and the growth equations were compared with growth performance index. Based on the correction of back-calculated length using weighted average by age, the changes by female and male were -14.19% and -5.23% for $L_{\infty}$, and 59.28% and 18.91% for k, respectively. The corrected growth performance index by weighted average improved at 7.05% and 2.46% by female and male, respectively, compared to the arithmetic averages.

• 한국통신학회논문지
• /
• 제30권3A호
• /
• pp.217-225
• /
• 2005

본 논문은 다양한 무선 통신 표준에서 사용되는 비터비 알고리즘을 위한 전용의 DSP 명령어 및 하드웨어 구조를 제안한다. 제안한 구조는 비터비 알고리즘의 Trace Back(TB) 연산 사이클을 효과적으로 줄일 수 있다. 제안된 비터비 전용 명령어와 하드웨어 구조는 비터비 연산의 Add Compare Select(ACS) 연산 과정과 TB 연산 과정의 병렬 처리가 가능하며, 병렬 연산을 지원하기 위해 트랠리스 버터플라이 연산 과정에서 필요한 데이터를 자동으로 생성하는 Offset Calculation Unit(OCU)을 제안한다. 제안된 OCU는 삼성 SEC 0.18μm라이브러리로 로직 합성하여 1,460 게이트 개수를 가지며, 최대 지연 시간은 5.75ns를 나타내었다. 사용된 ACS-TB 병렬 처리 방식은 Eb/No 값이 6dB인 경우 MLSE 등화기 사용 사용되는 일반적인 TB 연산 방식과 비교하여 거의 동일한 BER 성능을 보여 주었으며, 제안한 DSP는 구속장 K=5 일 때 Carmel DSP와 비교하여 11%, TI TMS320c55x와 비교하여 45%의 연산 사이클이 줄일 수 있다.

• Journal of the Korean Data and Information Science Society
• /
• 제20권1호
• /
• pp.149-158
• /
• 2009

쯔쯔가무시증은 가을철 유행성 출혈열 중 80%이상을 차지하는 질병으로 1주에서 2주의 잠복기를 가지는 것으로 알려져 있다. 우리는 그 잠복기간의 확률분포가 감마분포라 가정하고 후향연산식을 이용하여, ${\hat{\mu}}=309.92$$, ${\hat{\sigma}}=14.154$인 정규분포를 따르는 감염자 분포를 추정하였다. 감염자는 10월에 집중적으로 분포하는 것으로 나타났다. 이러한 감염자 분포형태는 발병자 수가 11월동안 급격하게 증가하는 것에 기인한다. 본 연구에서 추정한 감염확률에 의해 미래의 유병자수를 계산한 결과 최대 1200명이었고 이는 매년 증가하는 발병자 수의 경향을 반영하지 못한 한계가 있다. 또한 우리는 전염병 모형으로 잘 알려져 있고 전염발전 단계간의 상호작용을 고려하는 SIRS 모형을 적용해 보았다. 모수는 초기값으로부터 잘 근사되어 수렴하는 값으로 추정하였다.

• 대한가정학회지
• /
• 제34권4호
• /
• pp.249-263
• /
• 1996

According to the design method for constructing the G gori(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic G gori, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar and the collar strip create a visual effect by equalizing the lengths of the tow sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since th-ere in no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial requlation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the pattern design is as follows: 1) The conic angle for the G gori's girth, length and neck width is fixed at 70 degrees. 2) The radius of the cone is B/2. 3) The calculation formula is B/4 + 1.5cm 4) The armhole formula is B/4, the same as in the basic method. 5) The width formula is B/10. 6) The ratio of the collar junction(width of collar + width of collar strip)to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius (B/2), that is an arc that exceeds the length of the G gori's midsection; the component ratio of this length to the collar junction is accordingly 13:5. 8) The curve frame length of the back midsection is an arc exceeding B/4(the armhole line). 9) The ratio of the sleeve opening calculation formula to the armhole length is 8:5, forming an arc with the midsection length.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.1929-1939
• /
• 1999

This paper presents a neural network approach, which was named PRONET, to 3D object recognition and pose calculation. 3D objects are represented using a set of centroidal profile patterns that describe the boundary of the 2D views taken from evenly distributed view points. PRONET consists of the training stage and the execution stage. In the training stage, a three-layer feed-forward neural network is trained with the centroidal profile patterns using an error back-propagation method. In the execution stage, by matching a centroidal profile pattern of the given image with the best fitting centroidal profile pattern using the neural network, the identity and approximate orientation of the real object, such as a workpiece in arbitrary pose, are obtained. In the matching procedure, line-to-line correspondence between image features and 3D CAD features are also obtained. An iterative model posing method then calculates the more exact pose of the object based on initial orientation and correspondence.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.783-784
• /
• 2006

In case of a difference exist between the experimental value and estimated value of back-emf, there can be a difference of turn number or residual flux density of permanent maget of the motor. In order to presume the turn number, the average length for each coil is used to calculate the resistance. However in producing the motor, doc to the tension of coil, the outer diameter of coil becomes smaller, and then the resistance estimated by average length for each coil is not correct. Therefore in this paper, through the comparison of experiment value and estimated value of inductance, a method of presuming the turn number and PM's residual flux density of an IPM motor is presented. The inductance of IPM motor changes with the rotor position, therefore the rotor part is taken out and then the inductance in open circuit condition is measured. In the analytical calculation, 3D FEM(Finite Element Method) is used, which can consider the leakage flux of end turns in frinzing effect.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.122-132
• /
• 2017

This study dealt with the design process of the 78 kW permanent magnet synchronous generator for engines. After the calculation of the basic dimensions through a theoretical method in the process of initial model design, FEA (finite-element analysis) and a d,q-axis equivalent circuit were used to identify the generator characteristics depending on the number of poles. With the use of the space harmonic analysis method, the back-EMF (electromotive force) and THD were checked, and then the number of slots was determined. In addition, the most optimized generator dimensions were determined through a sizing optimization technique. Based on this, the optimum model with enhanced efficiency, material costs, and temperature characteristics was derived, and the availability of the design method was confirmed through a comparative analysis of the initial and optimum models.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.997-998
• /
• 2007

This paper deals with analytical solution concerning the image method using the magnetic charge instead of 3D FEA(finite element analysis) in the slotless single air-gap motor. The theory of analytical method and the design procedures are introduced. The reliability and validity of proposed analytical solution are verified through the comparison with the results of commercial 3D FE software. In addition, calculation time between proposed analytical solution and 3D FEA is compared. Finally, characteristics, such as Back-EMF and phase resistance, between calculated and experimental results are compared. From the verification with 3D FEA and experimental results, it is proved that presented analytical method provided very effective and precise results.