• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.652-659
• /
• 2008

This study was designed to testify the possibility and devise the method to manipulate the 3D body scan data to produce rounded-belt pattern adaptable to hip-type variation of women in their 20's. The results of this research were as follows : Firstly, based on drop-value distribution of hip and waist girth, 151 subjects were classified into three hip-types; Type 1 (15.23%) was 'cylinder type', showing lowest drop-value, Type 2 (69.54%) was 'average type' and Type3 (15.23%) was 'hourglass type' showing highest drop-value. Secondly, using CAD program, design lines for round shape belt were set on the surface of 3D scan data of representative subject of each type. And divided 3D surfaces were flattened onto the plane by the internal tools of CAD program. The measure, 'lifting value of round belt pattern', implying the level of curve ratio of pattern was higher in back than front. This result might be linked to the fact that the hip part is more protruded than the abdomen part. And the measures also showed highest values in Type 3(hourglass type) and lowest in Type 1(cylinder type), meaning that the pattern of Type 3 showed more rounded shape than that of Type 1. This finding implied that round belt for body type having high drop-value should be shaped more curved. Thirdly, difference ratios of outline length and area between 3D curves(body surface) and 2D plane(pattern) were 4.5% and 1.3%, respectively. This result demonstrated and solidified the feasibility of designing digital garment pattern from 3D body scan data.

• Fashion & Textile Research Journal
• /
• v.13 no.5
• /
• pp.661-671
• /
• 2011

This study was designed to produce rounded belt pattern and tight-skirt pattern drafting method using 3D body scan data. Subjects were thirty women in their early twenties. In order to figure out the optimum cutting points, namely, where darts are made, using CAD program, curve ratio inflection points on the horizontal curve of waist, abdomen, and hip to find 1 point in the front, two points in the back part. The average length from center front point to maximum curve ratio was 7.7 cm(46.3%) on the waist curve; 7.9 cm(39.4%) on the abdomen curve. And the average length from center back point to maximum curve ratio point was 6.9 cm(39.0%) for first dart and 11.2 cm(63.3%) for second dart on the waist curve; 8.9 cm(35.8%) for first dart and 15.7 cm(63.3%) for second dart on the hip curve respectively. The cutting lines from were made up by connecting curve inflection points. After divided using cutting lines, each patch was flattened onto the plane and all the technical design factors related with patternmaking were measured, such as dart amount, lifting amount of side waist point, etc. Based on the results of correlation analysis among these factors, regression analysis was done to produce equations to estimate the variables necessary to draw up pattern draft method; F1=F8+1.1, $F4=2.5{\times}F2+0.9$, $F5=0.9{\times}F4+1.0$, $F6=0.3{\times}F4+0.4$, $B1=0.9{\times}B8+2.3$, $B4=2.1{\times}B2+1.3$, $B5=0.9{\times}B4+3.5$, and $B6=0.3{\times}B4+0.4$.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.27 no.2
• /
• pp.9-15
• /
• 2021

Background: This study investigated the effects of sustained natural apophyseal glides (SNAGS) technique on lower back pain and pain disability among university students with lower back pain. Methods: A total thirty 20~30 year old university students with lower back pain were divided into two groups. A lumbar flexibility exercise was applied to the control group (n=15). The SNAGS technique group (n=15) received L1~L4 segment mobilization using SNAGS technique. Intervention was implemented for 20 minutes, 3 times a week for 3 weeks. The SNAGS were performed using belt with flexion and extension, whereas lumbar flexibility exercise included lumbar flexion and extension. Lower back disability was measured using the Korean Oswestry disability index (KODI), and pain sensitivity was measured by pain pressure threshold (PPT). The groups were assessed for lower back pain disability and pain, before and after the intervention. Results: There were significant improvements in both the KODI and PPT of the SNAGS technique group (p<.05), while the lumbar flexibility exercise group showed no significant change (p>.05). In addition, the SNAGS technique group had a statistically significant difference in KODI and PPT compared to the lumbar flexibility exercise group (p<.05). Conclusion: SNAGS technique is more effective than lumbar spine joint flexibility exercise in the improvement of lower back pain disability and pain among university students with lower back pain.

• Journal of the Korean Society of Costume
• /
• v.26
• /
• pp.221-232
• /
• 1995

It was aimed to study the costume of Koryo dynasty based upon the one hundred and thirty four pictures of the engraved painting on the wood. The costume to study were made about 400 years during the King Mok-jong(1006) to the forth year of the king Wu based upon the Avatamaka Sutra and Pulsul-Yaesu 가) Men's wear 1. Hair style and hair dress ; Man tied up a top knot and they put on the hat such as a Kuan, Kun, and Mo. The young boys binds his hair up one, two, and three knots. 2. Clothes : 1) King wore an uniform of Mien-lu Kuan system. 2) The Crown Prince and high rank officials wore Yuan-yu-Kuan Won-jung-po-ju-Kuan, Sa-bang-Kuan, Yun-wha-Kuan and montain shape Po-ju-Kuan as a court dress. 3) Officials put on the Pok-du as an official dress and Won-jung-ip-mo, Kun and Mo as an everyday dress, the monk put on the diamond shape Do-kuan and Du-kun and the soldier put on the Helmet. Costume system of man was as follows ; They wore exchanged shape collar, big sleeve jacket, long skirt, apron, hanging precious stone big belt as a Mien-pok. 4) The soldiers wore helmet, Keun-Kap, Scarf, Pee-Bak, Hung-Kap, Pok-Kap, Yang-Dang-Kap, We-Yo-Kap, Kum-Kap, and caries arms. Lower-level officials wore Pe-Bal, Kun-Mo, gae, won-leung, very small sleve jacket, a long coat reaching up to the knee length, slacks, belt, loin cloth and apron. 5) Children's bind their hair up angle shape and wore a half long jacket raching up to the hip and slacks. 나) Women's wear; 1. hair style and hair dress; 1) High rank women's hair style was very extravaganceful. They made their hair top knot (one, two, or more knots) and decoraed precious stone, pan shape head dress, wheel shape head dress, and flower shape precious stone decorated head dress. 2. Clothes ; 1) High rank ladi's wore Kun-Kyun attached jacket, and jacket sleeves decorated pleats, and pleats decorated long skirt, apron, back apron, knot belt, scarf, this type is the same with Dang Dynasty, five dynasty of china, Song, Kum, Won, Myung Dynasty, and our costume of Poe-hae, and Shilla Dyansty. 2) Official ladies wore exchange shape collor, big sleeve jacket, long pleats skirt, apron, and back apron, scarf. 3) Women wore top knot hair style and decorated by ribbons. Shoulder scarf attached small sleeve jacket and wore reaching up to the knee length. Side seam is open and under wear was long skirt. 4) High knot hair style and exchanged shape collor jacket, under wear wore long skirt. They wore under skirts and the jackets. 5) High knot hair style, exchange shape collor jacket reaching up to the knee length small sleeve under wear wore long skirt, belt. 6) High knot hair style, big sleeve jacket and long skirt. 7) Foot wear wore boots, mokasin type shoes, sandal.

• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.81-92
• /
• 2021

In this study, we investigated the effects of five EMS lumbar back pressure belts produced on an anatomical basis on lumbar spine stabilization. Five core muscles were selected, including the urinal, vertebral column, endotracheal, external abdominal, and large back muscles, and patterns were designed using a conductive fabric considering the appropriate muscle shape and pain-causing points. We experimented with four motions to examine the effects of different EMS abdominal compression belts on lumbar spine stabilization. Five healthy men in their 20s were selected. The selection conditions include no back pain history for the past three months, no restricted movements through pre-inspection, and the muscular strength of the body should belong to the normal grade. Using SLR, the sequence of experimental actions was chosen from the following but not limited to left-hand, body-hand, and back-line forces. Resting between movements lasted for 2 min, and the experiments were conducted after wearing the EMS abdominal pressure belt. Electrical stimulation was applied for 10 min to increase blood flow and muscle activation. The statistics of the experimental results were analyzed for specific differences by conducting the Wilcoxon and Friedman tests with nonparametric tests. The ranking results of each pattern were successfully assessed in the order of 5, 4, 3, 1, 2 for the five patterns, and we could identify slightly more significant results for experimental behavior associated with each muscle movement. Patterns produced based on anatomy showed differentiated effects when electric stimulation was applied to each muscle in different shapes, which could improve the stabilization of the lumbar spine in everyday life or training to the public. Based on these results, subsequent research would focus on developing smart healthcare clothing that is practical in daily life by employing different anatomical mechanisms, depending on the back pain, to utilize trunk-type tights.

• Journal of Mechanical Science and Technology
• /
• v.18 no.8
• /
• pp.1327-1337
• /
• 2004

An efficient multi-objective optimization method is presented making use of neural network and a systematic satisficing trade-off method (STOM), in order to simultaneously improve both maneuverability and durability of tire. Objective functions are defined as follows: the sidewall-carcass tension distribution for the former performance while the belt-edge strain energy density for the latter. A back-propagation neural network model approximates the objective functions to reduce the total CPU time required for the sensitivity analysis using finite difference scheme. The satisficing trade-off process between the objective functions showing the remarkably conflicting trends each other is systematically carried out according to our aspiration-level adjustment procedure. The optimization procedure presented is illustrated through the optimum design simulation of a representative automobile tire. The assessment of its numerical merit as well as the optimization results is also presented.

• Physical Therapy Korea
• /
• v.7 no.4
• /
• pp.56-64
• /
• 2000

최근에 작업현장에서 널리 사용되고 있는 허리보호대는 그 예방적 효과에 대한 확실한 검증이 이루어지지 않고 있다. 작업현장에서의 허리보호대의 예방적 효과에 대한 8편의 생체역학적(biomechanical) 연구들과 6편의 역학적(epidemiological) 연구들 그리고 2편의 종합적 연구들을 비교 정리하였다. 대부분의 생체역학적 연구들은 허리보호대의 기계적 작용과 그에 따른 예방적 효과와의 직접적인 상관관계를 보여주지 못하고 있다. 역학적 연구들은 일관성 없는 결과들을 발표하여 작업현장에서의 허리보호대의 예방적 효과에 대한 연구결과간의 비교를 어렵게 하고 있다. 좀더 확실한 결론을 얻기 위해서 앞으로 작업현장에서의 허리보호대의 예방적 효과에 대한 더 많은 연구가 있어야 할 것이다.

• Journal of Biomedical Engineering Research
• /
• v.37 no.5
• /
• pp.161-167
• /
• 2016

Recent technological advances in sensor fabrication and bio-signal processing enabled non-constraint and non-intrusive measurement of human bio-signals. Especially, non-constraint measurement of ECG makes it available to estimate various human health parameters such as heart rate. Additionally, non-constraint ECG measurement of wheelchair user provides real-time health parameter information for emergency response. For accurate emergency response with low false alarm rate, it is necessary to discriminate quality levels of ECG measured using non-constraint approach. Health parameters acquired from low quality ECG results in inaccurate information. Thus, in this study, a machine learning based approach for three-class classification of ECG quality level is suggested. Three sensors are embedded in the back seat, chest belt, and handle of automatic wheelchair. For the two sensors embedded in back seat and chest belt, capacitively coupled electrodes were used. The accuracy of quality level classification was estimated using Monte Carlo cross validation. The proposed approach demonstrated accuracy of 94.01%, 95.57%, and 96.94% for each channel of three sensors. Furthermore, the implemented algorithm enables classification of user posture by detection of contacted electrodes. The accuracy for posture estimation was 94.57%. The proposed algorithm will contribute to non-constraint and robust estimation of health parameter of wheelchair users.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.5
• /
• pp.819-830
• /
• 2010

This study proposes medical gowns for interns and residents that address the functions of utility and activity. Based on the questionnaires, the prototype focused on the pockets for practical use and movement adaptability. Functional pockets were made by increasing pocket sizes and separating pockets with sections according to use. An inside pocket and a loop for an identification tag was placed on the chest pocket and the side seam pocket were oblique lined. To resolve horizontal stress on the back of the gown,6 cm action pleats were added at both ends of the bladebone. The elbow area was tucked up to improve the workplace activities. To reduce hamper on the gown hemline, slits were added along the gown side seam. The front button was changed into an inside button closure. The cuffs, belt, and back waist belt were removed due to occupational cases of inconvenience. The length of the sleeves was adjusted with belts to improve the movement of the arms. In accordance with design preference, the gown was designed to be knee-length with wrist length sleeves. Blue colored (2.5PB 3/12: by Munsell) material was inserted to reduce the contamination on the neck, cuffs, front closure, and hemline area. The planning cloth of the experimental gown was designed to improve activity function, cleaning, and comfort from light materials. The field test (with 30 doctors at university hospitals and the objective assessment with 9 subject groups)were done by the valuation between the existing gown and the prototype. The results showed that the prototype had to be modified by decreasing the pocket size, expanding the usage of the penholder, and simplify front pockets in order to maintain unity. The loop for the identification tag, inside pocket, and the blue colored material had to be removed. The front closure of the gown had to return to its original state.

• Journal of the Korean Society of Radiology
• /
• v.5 no.5
• /
• pp.277-282
• /
• 2011

When we keep sitting for a long time, we end up with pain due to changes in the curvature in the waist. This study examined impacts from the wearing of a SPINE-GUARD(belt for the waist stabilization) on a cross-legged sit on variations of the Cobb's angle, lower back pain and trunk flexion angle. 15 men for the examination have watched movies or attended lectures while wearing a belt for 90 minutes per round for every five rounds for two weeks. The Cobb's angle showed a significant decrease from $48.36{\pm}14.57$ before wearing to $28.09{\pm}11.63$ after wearing (p<0.05). Pain decreased from $4.53{\pm}2.36$ before wearing to $2.733{\pm}2.153$ after wearing (p<0.05). The trunk flexion angle also showed a significant decrease from $82.33{\pm}20.30$ before wearing to $70.2{\pm}19.43$ after wearing (p<0.05). Given these findings, the wearing of a SPINE-GUARD seems to affect variations of the Cobb's angle and trunk flexion angle, and decrease of lower back pain.