• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.284-285
• /
• 2007

본 논문에서는 저소음 및 저 신호 왜곡 특성을 가지는 내환원성 유전체 원료를 개발하기 위하여 $(Ca_{0.7}Sr_{0.3})(Zr_{0.97}Ti_{0.03})O_3$에 $CaTiO_3$, $SrTO_3$, $BaTiO_3$를 첨가하여 이에 따른 유전 특성을 조사하였다. 첨가량의 조절 및 glass frit 첨가를 통하여 환원성 분위기에서도 유전율 80 ~ 100, 절연저항 (R*C) 500[ohm-F] 이상의 유전특성을 얻었다. 본 연구결과로 얻어진 유전재료를 적용하면 무소음 및 저 신호 왜곡 특성을 가지면서도 고 신뢰성의 MLCC를 제작할 수 있을 것으로 예상된다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.6
• /
• pp.504-510
• /
• 2002

Recently, thin film capacitors of high dielectric constant and low leakage current are applied to integrated devices. In this study, (Ba, Sr)$TiO_3$ (BST) thin films for low cost were prepared by Sol-Gel method. BST solution was spin-coated on Pt/$SiO_2$/Si substrate at 4,000 rpm for 10 seconds. Coating process was repeated 3 times and then sintered at $700^{\circ}C$ for 30 minutes. Structural and electrical characteristics of each specimen were analyzed by TG-DTA, SEM, fractal phenomenon, voltage-current and dielectric factor. Thickness of BST ceramics thin films are about 2,600~2,800 ${\AA}$ at depositing 3 times. Dielectric constant of thin films was decreased in 1 kHz~1 MHz. Dielectric constant and loss to frequency were 250 and 0.02 in $(Ba_{0.7}Sr_{0.3})TiO_3$ (BST3). Leakage current of BST3 was $10^{-9}\sim10^{-11}$/ A under 3 V.

• Progress in Superconductivity and Cryogenics
• /
• v.13 no.4
• /
• pp.22-25
• /
• 2011

A single-coat $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) film of high critical currents ($I_c$) could be successfully fabricated by optimizing the viscosity of the coating solution in the metal-organic deposition (MOD) process. From a Ba-deficient coating solution (Y: Ba: Cu = 1: 1.5: 3) having the viscosity of 212 $mPa{\cdot}sec$, 0.9 ${\mu}m$-thick single coat YBCO film with the $I_c$ value of 289 A/cm-width ($J_c$ = 3.2 MA/$cm^2$) at 77 K was achievable on the $SrTiO_3$ (STO) substrate, which was superior to that of our previous report for 0.8 ${\mu}m$-thick single coat YBCO film from a stoichiometric coating solution (Y: Ba: Cu = 1: 2: 3) on the $LaAlO_3$ (LAO) substrate. This result might be attributed to denser and more homogeneous microstrcuture in the case of the YBCO film from the Ba-deficient coating solution.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.589-594
• /
• 1997

Superconducting $YBa_2Cu_3O_y$ thin films were prepared at the deposition temperature of $650^{\circ}C$ under oxygen partial pressure of 0.0126 Torr on Si(111) and SrTiO3(100) substrates by chemical vapor deposition technique using $\beta$-diketonates of Y, Ba and Cu as source materials. The thin film fabricated on $SrTiO_3(100)$ had a $T_{c,onset}$ of 91K and $T_{c.0}$ of 87K. The thin film prepared on Si(111) had a $T_{c,onset}$ of 91K but didn't have a $T_{c.0}$ at liquid nitrogen boiling point(77.3K). Dense and two-dimensionally well alligned microstructure was developed for the film deposited on $SrTiO_3(100)$ substrate whereas a relatively porous and randomly distributed microstructure was developed for the film prepared on Si(111) substrate.

• Journal of Sensor Science and Technology
• /
• v.1 no.1
• /
• pp.67-75
• /
• 1992

PTC thermistor has been fabricated with as-received $BaTiO_{3}$ powder and its electrical properties were investigated. The resistivity of the PTC thermistor was measured at $20^{\circ}C$ intervals from $20^{\circ}C$ to $200^{\circ}C$. The electrical characteristics of the PTC thermistor are determined by the ac complex impedance analysis. The average grain size measured with a scanning electron microscope increased from $3.8{\mu}m$ to $8.8{\mu}m$ with increasing sintering temperature between $1280^{\circ}C$ and $1400^{\circ}C$. The maximum resistivity jump was $4{\times}10^{5}$. The bulk resistivity of the thermistor sintered above $1340^{\circ}C$ decreased with increasing temperature of the measurement. The grain boundary resistance increased exponentially, the grain boundary capacitance decreased, and the built-in potential at the grain boundary increased with increasing temperature of the measurement. The charge densiy at the grain boundary increased with increasing temperature up to $110^{\circ}C$, which leveled off with further increase in measuring temperature.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.3
• /
• pp.90-94
• /
• 2004

The variation of electrical properties of (Ba,Sr)$TiO_3$ [BST] thin films for Metal-Insulator-Semiconductor (MIS) capacitors was investigated. BST thin films were deposited on p-Si(100) substrates by the RF magnetron sputtering with temperature range of 500~$600^{\circ}C$. The dielectric properties of MIS capacitors consisting of AUBST/$SiO_2$/Si sandwich structure were measured for various conditions. We examined the characteristics of MIS capacitor with various oxygen pressure, substrate temperature and (Ba+Sr)/Ti ratio. It was found that the leakage current was reduced in MIS capacitor with high quality $SiO_2$ layer was grown on bare p-Si substrate by thermal oxidation. The BST MIS structure showed relatively high capacitance even though it is the combination of high-dielectric BST thin films and $SiO_2$ layer. The charge state densities of the MIS capacitors and Current-voltage characteristics of the MIS capacitor were investigated. By applying $SiO_2$ layer between BST thin films and Si substrate, low leakage current of $10^{-10}$ order was observed.

• Economic and Environmental Geology
• /
• v.40 no.1 s.182
• /
• pp.47-66
• /
• 2007

The Sitting Buddha Carved on Rockcliff (National treasure No. 201) in Bukjiri consists of porphyritic biotite granite, which was fractured by three joint sets of NE-SW, EW and NS directions. They produced a physical weathering that broke many parts of the Buddha and background. The chemical index of alteration is 59 to 61 from the major elements in the granite that was weathered into producing kaolin minerals from alteration of feldspars and biotite. With weathering degree, major element compositions increase in $SiO_2$ and MnO, whereas decrease in $TiO_2,\;{Fe_2O_3}^t,\;MgO,\;CaO\;and\;K_2O$. Change proporations of trace elements to $Al_2O_3$ increase in all transition elements, Rb and Y, whereas decrease in Li, Sr and Ba. REE pattern increases only in HREE. Particularly, a decrease in CaO, $K_2O$, Sr and Ba results in what they are effluxed to dissolve from feldspars by groundwater. The Buddha image has been deteriorated into joints, color changes, brown rusts, granular decay, microorganic smears by the such weathering causes as deformation, moisture, temperature variation and microorganic living. The moisture, which leaks along the joints in the granite, not only dissolve to decompose minerals but also grows many microorganism and is frozen over during winter. NE-SW and NS joint sets affect to seep in water during rainy days to deteriorate the image because they extend outward.

• Journal of the Korean Ceramic Society
• /
• v.29 no.6
• /
• pp.459-462
• /
• 1992

It has been reported that the size and characteristics of ferroelectric domains which have an essential role on the ferroelectric properties depend on the grain size of ferrolectric ceramics. Therefore understanding the change of domain characteristics with grain size is so important to know the dependence of dielectric constant, dielectric loss and aging on the grain size. In this research, the equilibrim domain with is calculated as d={{{{ SQRT { { 64 pi sigma a} over {3C11Ss2 } } }}. This calculated value is nearly same to the measured value of BaTiO3 and Pb(Zr0.4Ti0.6)O3 ceramics 90$^{\circ}$domain wall width. The calculated 90$^{\circ}$domain wall enerygy in Pb(Zr0.4Ti0.6)O3 which is obtained through the model is approximately 2$\times$10-2J/$m^2$.

• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.262-266
• /
• 2000

We investigated the effect of the grain size on the photovoltaic current in (Pb$_{1-x}$La$_x$)TiO$_3$ceramics, and the photoinduced domain switching in (Pb$_{0.85}$La$_{0.15}$)TiO$_3$and BaTiO$_3$ceramics. These behaviors in ferroelectric ceramics were attributed to the grain boundary at which photoexcited electrons were trapped. As the charged grain boundary acted as an electro-potential barrier which impeded the movement of electrons, the photovoltaic current showed a peak at a critical grain size. The space charge field built by the electrons trapped at the grain bound-aries was accounted for the photoinduced domain switching, and AE experimental results support well this account.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.242-248
• /
• 2000

BST thin films were prepared with various deposition conditions by rf-magnetron sputtering. As substrate temperature increases and Ar/$O_2$ratio decreases, the electrical properties of the BST films improve. The conventional Schottky model and modified-Schottky model were introduced in order to investigate the leakage-current-conduction mechanisms of the deposited films. It was found that the modified-Schottky model better describes the current-conduction mechanism in the BST films than the conventional Schottky model. From the modified-Schottky model, optical dielectric constant ($\varepsilon$), electronic drift mobility ($\mu$), and barrier height $({\phi}_b)are calculated as $\varepsilon$=4.9, $\mu$=0.019 $\textrm{cm}^2$/V-s, and ${\phi}_b=0.79 eV.