• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.413-416
• /
• 1996

The ceramic dielectrics were fabricated by mixing of Mn $O_2$ and ZnO at (B $a_{0.85}$ $Ca_{0.15}$)Ti $O_3$ and studied for dielectric relaxation characteristics. The dielectric relaxation time was increased by space charge polarization of palaelectric layer at the low temperature and frequency but it was decreased by Interface polarization at the high temperature and frequency. The remnant polarization and coercive field of ceramic dielectrics was decreased by rising temperature.ure.

• Korean Journal of Materials Research
• /
• v.32 no.12
• /
• pp.560-564
• /
• 2022

In this study, lanthanum boron silicate glasses were prepared with a composition of x Li₂O-(60-x)B₂O₃-5CaO-5BaO-7ZnO-10SiO₂-10La₂O₃-3Y₂O₃ where x = 1,3,5,7, and 9 mol%. Each composition was melted in a platinum crucible under atmospheric conditions at 1,400 ℃ for 2 h. Clear glasses with a transmittance exceeding 85 % were fabricated. Their optical, thermal, and physical properties, such as refractive index, Abbe number, density, glass transition (T_g) and Knoop hardness were studied. The results demonstrated that refractive index was between 1.6859 and 1.6953 at 589.3 nm. The Abbe number was calculated using an equation for 589.3 nm (nd), 656.3 nm (nf) and 486.1 nm (nc) and was observed to be in the range from 57.5 to 62.6. As the Li₂O content increased, the glass transition temperature of the optical glass decreased from 608 ℃ to 564 ℃. If glass mold pressing is performed using a material with a low transition temperature and high mechanical strength, then the optical glasses developed in this study can be completely commercialized.

• Journal of the Korean Society of Groundwater Environment
• /
• v.3 no.1
• /
• pp.37-49
• /
• 1996

The objectives of this study are to investigate the groundwater and surface water contamination, to interpret the attenuation mechanism of contaminant transport, and to find the appropriate contamination indicator. at the two big landfill sites : Nanjido Landfill and Hwasung Landfill. Leachate from the Nanjido, th, Hwasung and the Kimpo waste disposal sites is characterized by high temperature (31.7-40.1$^{\circ}C$), high electric conductivity (14,650-32,800 ${\mu}$S/cm), somewhat higher pH(7.58-8.45) and low Eh (-119.4-20.4 mV), and is enriched in both major (Na$^{＋}$, K$^{＋}$, Ca$^{2＋}$, Mg$^{2＋}$, HC $O_3$$^{－}$, Cl$^{－}$) and minor (Mn, Sr$^{2＋}$, Ba$^{2＋}$, Li$^{＋}$, F$^{－}$, Br$^{－}$) ions. Municipal solid waste leachate and industrial waste leachate are effectively discriminated by the content of S $O_4$$^{2－}$, Fe, and heavy metals. The attenuation mechanism of each component was assessed using the chemical analysis. Cl-normalizing process, WATEQ4F simulation, and preceding flownet analysis. Based on the calculation of Contamination Factor, K, Na, Ca, Mg, B, Zn, HC $O_3$, Cl, F, Br and TOC are effective contamination indicators in the Nanjido landfill site, and K, Na, Ca, Mg, B, S $O_4$, HC $O_3$, Cl, F, Br and TOC in the Habsburg landfill site Particularly, TOC is the best contamination indicator in landfill sites influenced by sea water.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.721-727
• /
• 2002

In order to overcome trade-off among compositions, process and properties of the glasses with high PbO-base composition for PDP Rib, we studied glass crystallization and crystallization kinetics by Differential Thermal Analysis(DTA). Glass powder was obtained through melting/cooling/grinding, with 3 wt%TiO2 addition for the crystal nucleation and growth in $62PbO-19B_2O_3-10SiO_2-9(Al_2O_3-K_2O-BaO-ZnO)$(in wt%) composition glass. This powder was heat-treated for 1 to 10 h at $445^{\circ}C$ for nucleation. DTA measurements were performed to obtain the crystallization peak with $5∼25^{\circ}C/min$ heating rates. DTA crystallization peak temperature increased with increasing the heating rate and decreased with increasing the heating time. Because the Avrami parameter (n) was approximately 1, the surface crystallization occurred. The maximum nucleation time was 2 h.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.304-304
• /
• 2008

최근 이동통신의 사업의 발달로 인하여 제품의 고속신호 전달에 대한 관심이 부각되고 있다. 이로 인해 고집적 LTCC 모듈로 제작이 가능하고 고속신호 전달이 용이한 저유전율과 낮은 loss특성을 요구하는 소재 개발의 지속적인 연구를 필요로 한다. 지금까지의 ceramic/glass composite에서 주로 사용된 ceramic filler는 $Al_2O_3$로 낮은 유전율을 구현하는데 한계가 있었다. Cordierite는 낮은 유전율(${\varepsilon}r$ < 4)을 나타내는 filler로서 저유전율 기판소재로 사용될 가능성이 높지만 아직까지 보고된 결과들이 미흡한 실정이다. 선행 연구에서 cordierite filler와 $SiO_2-B_2O_3-Al_2O_3$-RO (R Zn, Sr, Ba, Ca)계의 glass를 혼합하여 LTCC 용 기판소재로서의 가능성을 확인한 결과 5.0~5.5 의 낮은 유전율과 1,000~1,500의 Q를 나타내는 것을 확인 하였다. 하지만 sheet로 제작 시 $B_2O_3$ 계로 인해 볼밀 공정에서 슬러리를 응집시켜 점도를 증가(gelation)시키는 현상이 발생하였다. 이를 개선하기 위한 glass 조성의 $B_2O_3$ 함량을 5%줄여 만든 glass를 이용해 미세구조, 유전율과 Q 그리고 강도를 측정하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.36-36
• /
• 2007

$R_2O_3$(R=Bi, B)-RO(R=Ba, Zn)를 주성분으로 하는 Pb-free유리프리트에 높은 굴절률을 가지고 있는 $TiO_2$ filler를 첨가하여 PDP용 백색유전체를 제조하였다. $TiO_2$ type, 함량에 따른 백색유전체로의 반사율 및 유전 특성을 조사하였다. 백색유전체를 소성한 결과 rutile과 anatase를 중량비로 75:25로 혼합하여 $520^{\circ}C$에서 소성한 경우 밀도 및 수축율의 변화를 거의 나타나지 않았다. 그러나 $TiO_2$함량이 15wt.%를 혼합하여 첨가했을 경우 반사율은 높고 접합특성 또한 우수하였다. 또한, 유전상수는 $TiO_2$첨가량이 증가함에 따라 증가하는 경향을 나타내었다.

• Korean Journal of Materials Research
• /
• v.22 no.12
• /
• pp.669-674
• /
• 2012

Yellow phosphor dispersed color conversion glasses are promising phosphor materials for white LED applications because of their good thermal durability, chemical stability, and anti-ultraviolet property. Six color conversion glasses were prepared with high Tg and low Tg specimens of glass. Luminous efficacy, luminance, CIE (Commission Internationale de l'Eclairage) chromaticity, CCT (Correlated Color Temperature), and CRI (Color Rendering Index) of the color conversion glasses were analyzed according to the PL spectrum. Color conversion glasses with high Tg glass frit, sintered at higher temperature, showed better luminous properties than did color conversion glasses with low Tg glass frit. The characteristics of the color conversion glass depended on the glass composition rather than on the sintering temperature. The XRD peaks of the YAG phosphor disappeared in the color conversion glass with major components of $B_2O_3$-ZnO-$SiO_2$-CaO and, in the XRD results, new crystalline peaks of $BaSi_2O_5$ appeared in the color conversion glass with major components of $Bi_2O_3$-ZnO-$B_2O_3$-MgO. The characteristics of CIE chromaticity, CCT, and the CRI of low Tg color conversion glasses showed worse color properties than those of high Tg color conversion glasses. However, these color characteristics of low Tg glasses were improved by thickness variation. So color conversion glasses with good characteristics of both luminous and color properties were attained.

• Journal of Magnetics
• /
• v.18 no.4
• /
• pp.428-431
• /
• 2013

We demonstrate that a partial loading of $Ni_{0.5}Zn_{0.5}Fe_2O_4$ (Ni-Zn ferrite) film remarkably improves impedance matching of electrically small $Ba_3Co_2Fe_{24}O_{41}$ ($Co_2Z$) hexaferrite antenna. A 3 ${\mu}m$ thick Ni-Zn ferrite film was deposited on a silicon wafer by the electrophoresis deposition process and post-annealed at $400^{\circ}C$. The fabricated Ni-Zn ferrite film has saturation magnetization of $268emu/cm^3$ and coercivity of 89 Oe. A partial loading of the Ni-Zn ferrite film on the $Co_2Z$ hexaferrite helical antenna increases antenna return loss to 24.7 dB from 9.0 dB of the $Co_2Z$ antenna. Experimental results show that impedance matching and maximum input power transmission to the antenna without additional matching elements can be realized, while keeping almost the same size as the $Co_2Z$ antenna size.

• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.282-293
• /
• 2021

This paper examines gamma-ray shielding properties of SBC-Bx glass system with the chemical composition of 40SiO₂-10B₂O₃-xBaO-(45-x)CaO- yZnO- zMgO (where x = 0, 10, 20, 30, and 35 mol% and y = z = 6 mol%). Mass attenuation coefficient (µ/ρ) which is an essential parameter to study gamma-ray shielding properties was obtained in the photon energy range of 0.015-15 MeV using PHITS Monte Carlo code for the proposed glasses. The obtained results were compared with those calculated by WinXCOM program. Both the values of PHITS code and WinXCOM program were observed in very good agreement. The (µ/ρ values were then used to derive mean free path (MFP), electron density (N_eff), effective atomic number (Z_eff), and half value layer (HVL) for all the glasses involved. Additionally, G-P method was employed to estimate exposure buildup factor (EBF) for each glass in the energy range of 0.015-15 MeV up to penetration depths of 40 mfp. The results reveal that gamma-ray shielding effectiveness of the SBC-Bx glasses evolves with increasing BaO content in the glass sample. Such that SBC-B35 glass has superior shielding capacity against gamma-rays among the studied glasses. Gamma-ray shielding properties of SBC-B35 glass were compared with different conventional shielding materials, commercial glasses, and newly developed HMO glasse. Therefore, the investigated glasses have potential uses in gamma shielding applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.174-174
• /
• 2009

현재 전자부품용으로 사용되는 유리프리트의 경우 PbO계를 주로 사용하고 있다. 최근 환경규제에 따른 PbO 사용이 제한됨에 따라 이를 대체할 Pb-free 유리 조성에 대한 연구가 활발히 진행 중이다. Pb-free계로서는 $Bi_2O_3$계, $B_2O_3$계가 주로 연구되고 있으나 소성 온도가 $500^{\circ}C$이상으로 높고 또한 $Bi_2O_3$ 계는 중금속이기 때문에 문제가 있다. 본 연구에서는 $400^{\circ}C$ 미만 소성이 가능한 SnO-$P_2O_5$계를 기본 조성계로 선택하고 열적, 전기적, 화학적 특성을 개선하기 위해 $R_2O_3$(R=Al, B), RO(R=Mg, Zn, Ca, Ba) 를 첨가하였다. 개선된 조성으로 샘플을 만들고 이를 대상으로 실제 전자부품 생산 공정에 적용 실험을 진행 하였다. 실험에 사용된 전자 부품은 소형 칩 베리스터로 생산 공정에서 코팅용 유리프리트와 파우더를 절연체로서 전면에 코팅하게 된다. 유리프리트를 코팅함으로서 누설 전류를 차단하고 생산 공정시 베리스터 내부를 보호하게 된다. 실험에 사용된 샘플의 열적 특성은 TMA로, 전기적 절연 특성은 고 절연저항 측정기로 측정하였고 내 산성과 내 알칼리성도 측정하였다. 샘플을 이용하여 완성된 칩 베리스터의 성능은 고온, 내습 신뢰성 TEST(고온:$150^{\circ}C$ 12HR, 내습:$85^{\circ}C$-85%12HR)로 실험하여 합부판정 (Leakage current <10uA)을 내려 완성품과 불량품을 가려내었다.