• Journal of the Korean Magnetics Society
• /
• v.21 no.1
• /
• pp.5-9
• /
• 2011

M$\ddot{o}$ssbauer and Raman spectrum studies have been carried out on the 2b-site Fe ion in the Ba-ferrite (M-type). The thermal dynamics of Fe ion was analyzed by M$\ddot{o}$ssbauer spectra at different angles between the $\gamma$-ray direction and c-axis. The vibration on the 2b-site was more active compare to other direction and had very strong intensity in the Raman spectrum.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.112-113
• /
• 2002

M-type hexa-ferrite BaFe$_{12}$O$_{19}$는 높은 보자력과 함께 화학적으로 안정하고 높은 전기 저항을 가지고 있어서 영구자석으로 아주 우수한 특성을 가지고 있으며, 고밀도 자기 기록매체로서 각광을 받고 있을 뿐만 아니라 microwave용이나 고주파 장치의 소자, 전파흡수체 및 전파 차폐제로서 주목받고 있는 재료이다. (중략)략)

• Journal of the Korean Magnetics Society
• /
• v.6 no.4
• /
• pp.251-257
• /
• 1996

A coercivity of barium ferrite (BaM) tape was found to be higher than the coercivity of BaM powder, This difference is in the range of 50 Oe to 600 Oe, which depends on substituted cations. physical properties of powder, and preparation conditions of the tape. The coercivity difference is attributed to both particle stacking and adsorption of organic solvent on particle surface. Regardless of substituted cations, the coercivity of longitudinally oriented BaFe tape was higher than that of BaM powder by a range of 100 Oe to 120 Oe, which is caused by particle stacking' During the active adsorption process on preparation of magnetic paint, where MEK (methyl ethyl ketone), TOL (toluene) and CHO (cyclohexanone) were used, chemisorption of solvents on the surface of substituted BaFe particle occurred to form polymeric compounds surrounding the particle. An increase in coercivity, caused by the solvent adsorption, was significant for Co-substutited BaM tape. Among these solvents CHO was the most effective one in increasing the coercivity of the Co-Ti substituted BaM tape.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2270-2275
• /
• 2011

The sintering behavior and microwave properties of ferrite ($Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics) were investigated for microwave applications. Also PIFA type antenna with ferrite was simulated. All samples were prepared by the solid state reaction method and sintered at $1350^{\circ}C$. All ceramics had relatively density above of 92% compare with theoretical density of $Ba_3Co_2Fe_{24}O_{41}$ ceramics. From the XRD pattens, the Z-type phase was existed as main phase in $Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics. The permittivity and permeability of $Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics were increased with Zn additions and decreased rapidly over frequency of 200~600 MHz. Several PIFA type antennas with ferrite and FR4 were simulated. All antenna structure had return loss of less than -10 dB at each resonant frequency. Simulated antenna using both ferrite and FR4 showed size reduction of 25% without a significant decrement of efficiency.

• Journal of the Korean Ceramic Society
• /
• v.17 no.3
• /
• pp.121-128
• /
• 1980

In order to obtain the fundamental data for the preparation of ferroxplana $Zn_2Y(Ba_2Zn_2Fe_{12}O_{22})$, which is useful for GHz-band communication, the optimum coprecipitation condition of $Zn(NO_3)_2-6FeCl_3$ in $NH_4OH$ solution and the formation process of the hexagonal ferrite were investigated. By the hot-petroleum-drying and calcining the coprecipitated hydroxide mixture $Zn(OH)_2 +Ba(OH)_2+ 6Fe(OH)_3$, the fine and uniform powder was obtained , whose phase composition and microstructure were studied by X.R.D. and electron microscope. In results, it was found that $Zn_2Y$, BaM and $Zn_2W$ were the representative phases in calcined specimens whose activation energies of crystal growth were about 3, 8, 2.5, $5.4{\times}10^4$ J/mole , respectively. The sintered specimens would be appreciated as useful magnetic cores for the high frequency communication.

• Journal of the Korean Magnetics Society
• /
• v.6 no.2
• /
• pp.117-121
• /
• 1996

육각판상 Ba-ferrite의 stacking 현상은 자성도료의 도포 후 자장배향를 행할 때 일어나는 것으로 알려져 있으나 분말의 건식분쇄시에도 일어났다. Edge mill을 사용하여 건식분쇄할 때 치환형 Ba-ferrite 분말의 보자력과 tap density는 거의 비례적으로 증가하였고, 분쇄시간보다는 가해지는 압력에 크게 의존하였다. 이 때 보자력의 증가원인은 분쇄시 생성되는 입자간의 stacking 현상에 기인된 것임을 투과전자현미경 관찰로부터 확인하였다. 분말의 tap density가 증가함에 따라 tape에서 분산초기의 광택도가 크게 감소되어 분산성은 떨어졌으나, 배향도는 tap density 1.3 g/$cm^{3}$에서 최대를 나타내었다. 과도한 건식분쇄에 의해 생성된 강고한 stacked cluster는 자성도료 제조시 분산성과 배향도를 동시에 떨어뜨리는 역할을 함을 알 수 있었다.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.10a
• /
• pp.45.2-45
• /
• 2000

• Proceedings of the Korean Magnestics Society Conference
• /
• 1991.11a
• /
• pp.64-64
• /
• 1991

• Proceedings of the Korean Magnestics Society Conference
• /
• 1991.11a
• /
• pp.84-85
• /
• 1991

• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.03a
• /
• pp.104-105
• /
• 1993