• Korean Journal of Materials Research
• /
• v.12 no.2
• /
• pp.160-165
• /
• 2002

High-frequency dielectric and microwave absorbing properties have been investigated in ferroelectric materials (BaTiO$_3$(BT), (1-x)Pb$Mg_{\frac{1}{3}}Nb_{\frac{2}{3}}$)O$_3$-xPbTiO$_3$(PMN-PT), (1-x)Pb$Mg_{\frac{1}{3}}Nb_{\frac{2}{3}}$O$_3$-xPb(Zn_{\frac{1}{3}}Nb_{\frac{2}{3}}$)O$_3$(PMN-PZN) for the aim of thin microwave absorbers in the frequency range of mobile telecommunication. The specimenns are prepared by conventional ceramic processing and complex permittivity has been measured by transmission/reflection method. The ferroelectric materials show high dielectric constant and dielectric loss in the microwave range and their domiant loss mechanism is considered to be domain wall relaxation. The microwave absorbance of BT 0.9PMN-0.1PT, and 0.8PMN-0.2PZN specimen (determined at 2) are found to be 99.5% (at a thickness of 4.5 mm), 50% (2.5 mm), and 30% (2.5 mm), respectively. It is suggested that PMN-PT or PMN-PZN ferroelectrics are good candidate materials for the spacer of λ/4 absorber. The use of ferroelectric materials is effective in reducing the thickness of absorber with their advantage of high dielectric constant.

• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.12-20
• /
• 2000

Dielectric property of Ba-modified 0.65Pb(Mg1/3Nb2/3)O3-0.35PbTiO3 ceramics having compositions near the morphotropic phase boundary was investigated. For the specimens having Ba contents between 0 and 20 at%, the average transition temperature was decreased linearly with increasing Ba contents and the degree of hysteresis was also decreased with increasing Ba contents. The maximum dielectric constants (K), electric field induced polarization(P) and electrically-induced strain(S) were found to exihibit a maximum value at∼3 at% of Ba. The increase of S and the decrease of hysteresis by minor additions of Ba impurities indicated the development of new higher perfomance actuator materials. The composition of Ba-PMN-PT (10/65/35) may be appropriate for capacitor materials because of low hysteresis and high polarization.

• Journal of the Korean earth science society
• /
• v.27 no.1
• /
• pp.49-60
• /
• 2006

The purpose of this study is to investigate geochemical characteristics for stream sediments in the Naju area. We collected 139 stream sediments samples from primary channels. Samples were dried slowly in the laboratory and chemical analysis was carried out using XRF. ICP-AES and NAA. In order to investigate geochemical characteristics, the geological groups categorized into granitic gneiss area, schist area, granite area, arenaceous rock area, tuff area, andesite area, and rhyolite area. Average contents of major elements for geological groups are $SiO_2\;58.37{\sim}66.06wt.%,\;Al_2O_3\;13.98{\sim}18.41wt.%,\;Fe_2O_3\;4.09{\sim}6.10wt.%,\;CaO\;0.54{\sim}1.33wt.%,\;MgO\;0.86{\sim}1.34wt.%,\;K_2O\;2.38{\sim}4.01wt.%,\;Na_2O\;0.90{\sim}1.32wt.%,\;TiO_2\;0.82{\sim}1.03wt.%,\;MnO\;0.09{\sim}0.15wt.%,\;P_2O_5\;0.11{\sim}0.18wt.%$. According to the comparison of average contents of major elements, $Al_2O_3\;and\;K_2O$ are higher in granitic gneiss area, $Fe_2O_3,\;CaO,\;P_2O_5$ are higher in tuff area, MgO and $TiO_2$ are higher in andesite area, $Na_2O_$ is higher in rhyolite area, $SiO_2$, and MnO are higher in arenaceous rock area. Average contents of minor and rare earth elements for geological groups are $Ba\;1278{\sim}1469ppm,\;Be\;1.1{\sim}1.5ppm,\;Cu\;18{\sim}25ppm,\;Nb\;25{\sim}37ppm,\;Ni\;16{\sim}25ppm,\;Pb\;21{\sim}28ppm,\;Sr\;83{\sim}155ppm,\;V\;64{\sim}98ppm,\;Zr\;83{\sim}146ppm,\;Li\;32{\sim}45ppm,\;Co\;7.2{\sim}12.7ppm,\;Cr\;37{\sim}76ppm,\;Cs\;4.8{\sim}9.1ppm,\;Hf\;7.5{\sim}25ppm,\;Rb\;88{\sim}178ppm,\;Sc\;7.7{\sim}12.6ppm,\;Zn\;83{\sim}143ppm,\;Pa\;11.3{\sim}37ppm,\;Ce\;69{\sim}206ppm,\;Eu\;1.1{\sim}1.5ppm,\;Yb\;1.8{\sim}4.4ppm$. According to the comparison of average contents of minor and rare earth elements for geological groups, Pb, Li, Cs, Hf, Rb, Sb, Pa, Ce, Eu, and Yb are higher in granitic gneiss area; Ba, Co, and Cr in schist area; Nb, Ni, and Zr in arenaceous rock area; Sr in tuff area: and Be, Cu, V, Sc, and Zn are such in andesite area.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.115.1-115
• /
• 1998

• Electrical & Electronic Materials
• /
• v.3 no.4
• /
• pp.339-346
• /
• 1990

미소변위소자에 적합한 전왜세라믹스를 제조하기 위하여 0.85Pb(Zn$_{1}$3-x/MgxNb$_{2}$3/) $O_{3}$-0.10BaTi $O_{3}$-0.05PbTi $O_{3}$조성으로 Mg(mol%)를 변화시키면서 시편을 제조하고 구조적, 유전적, 전기적 특성 및 온도 안정성을 관찰하였다. 큐리온도는 Mg(mol%)가 증가함에 따라 감소하였고 Mg(mol%)가 0.15일 때 유전상수가 가장 높았으며 완만도는 -3.9, 산만도.DELTA.Tc는 21로 가장 컸다. 전계에 따른 유전상수는 감소하였고 Mg(mol%)가 증가할수록 압전정수 d$_{31}$은 감소하였으나 0.05, 0.10, 0.15일 때는 거의 일정하였다. Mg(mol%)가 0.15까지 증가함에 따라 전왜정수 Q$_{31}$은 감소하였고 그 이상에서는 Mg(mol%)가 1/3일때 가장 컸으며 ES-1시편에서의 AC 60(Hz), 11(kV/cm) 전계(electric field)에 의한 왜형을 253*$10^{-6}$을 나타냈다.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.1
• /
• pp.37-47
• /
• 2018

Volcanic ash samples of historical eruptions from Mt. Baekdu were analyzed for major oxides, trace and rare earth elements by a variety of analytical techniques. The results indicate that the ashes consist of approximately 58.8~71.1 wt.% $SiO_2$, 9.6~16.8 wt.% $Al_2O_3$, 4.5~6.9 wt.% $Fe_2O_{3t}$, 0.1~1.7 wt.% MgO, 0.3~1.6 wt.% CaO, 5.2~6.3 wt.% $Na_2O$, 4.3~5.9 wt.% $K_2O$ and less than 1.2 wt.% $TiO_2$. Thirty two trace metals including Ba, Cu, Cr. Co, Ni, Sr, V, Zn, and Zr were analyzed. The ashes can be divided two groups: group A(1 ka Millennium pumice, 1668 and $190{\underline{3}}$ pumice) and group B(1702 pumice) according to the relative enrichment of HREEs. The abundances of heavy metals such as Cu, Co, Mn, and Zn were relatively low. As compared to the Sakurajima volcanic ash, Baekdusan volcanic ash has low concentrations of Y, Nb, Pb, U, Sc, V, Ni and Cu and high concentrations of Zr, Ba, Hf, Cr, Co, Zn and rare-earth (except Eu).

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1481-1483
• /
• 1994

The dielectric and electrical properties of $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3-BaTiO_3$ have been investigated. Perovskite crystalline phase of the specimens is confimed by XRD. The curie temperature decrease with increasing $BaTiO_3$ and hysteresis phenomena decrease with increasement of $BaTiO_3$. The strain vs. applied voltage characteristics exhibit nonlinear relationship and the specimen. of 0.9PMN-0.08PT-0.02BT shows the largest strain.

• Economic and Environmental Geology
• /
• v.29 no.3
• /
• pp.257-267
• /
• 1996

One hundred of thirty volcanic rocks col1ected from the Jeju island， Jeongog， Guryongpo and other areas were analyzed for major elements and trace elements with Au by inductively coupled argon plasma and graphite furnace atomic absorptiom spectrometry. The Au content is the highest values (0.2~43.4 ppb, average; 10.34 ppb) from the Jeju island volcanic rocks and the lowest (0.5~11.0 ppb, average; 1.23 ppb) from the Guryongpo volcanic area. The content of Au tends to be higher in the Quarternary volcanic rocks than Tertiary or Cretaceous volcanic rocks. The Au content of the calc alkali volcanic rocks tends to increase from mafic to felsic volcanic rocks, but that of the alkalic volcanic rocks tends to increase from felsic to mafic volcanic rocks. The Au content of the volcanic rocks collected from the Jeju island shows the highest values in the feldspar olivine basalts. Elements or oxides which have positive or negative correlations with Au are Ag, Mo, Rb, V, Y, $K_2O$, MgO and $SiO_2$, but other elements analyzed are not shown correlations with Au. It has a tendency to show that samples from the Jeju with 5 ppb gold and more are plotted in the non-Dupal area and those with less than 5 ppb gold in the Dupal area, while those from the Jeongog with 5 ppb gold and more are plotted in the Dupal area and those with less than 5 ppb gold in the non-Dupal area, in the Ba/Nb-La/Nb, Zr/Nb-Ba/Nb diagrams. It shows that samples from the Jeju and Guryongpo with high gold content are plotted in the within-plate, while those with low gold content are plotted in the arc-related area, and those from the Jeongog are scattered in the $TiO_2-Al_2O_3$, $Zr/A1_2O_3-TiO_2/Al_2O_3$ diagrams.

• Korean Journal of Materials Research
• /
• v.13 no.4
• /
• pp.259-265
• /
• 2003

For the aim of thin microwave absorbers used in mobile telecommunication frequency band, this study proposed a high permittivity dielectrics(λ/4 spacer) coated with ITO thin films of 377 $\Omega$/sq(impedance transformer). High frequency dielectric properties of ferroelectric ceramics, electrical properties of ITO thin films and microwave absorbing properties of ITO/dielectrics were investigated. Ferroelectric materials including $BaTiO_3$(BT), 0.9Pb($Mg_{1}$3/Nb$_{2}$3/)$O_3$-0.1 $PbTiO_3$(PMN-PT), 0.8 Pb (Mg$_{1}$3/$Nb_{2}$3/)$O_3$-0.2 Pb($Zn_{1}$3$_Nb{2}$3/)$O_3$(PMN-PZN) were prepared by ceramic processing for high permittivity dielectrics,. The ferroelectric materials show high dielectric constant and dielectric loss in the microwave frequency range. The microwave absorbance (at 2 ㎓) of BT, 0.9PMN-0.1PT, and 0.8PMN-0.2PZN were found to be 60%(at a thickness of 3.5 mm), 20% (2.5 mm), and 30% (2.5 mm), respectively. By coating the ITO thin films on the ferroelectric substrates with λ/4 thickness, the microwave absorbance is greatly improved. Particularly, when the surface resistance of ITO films is closed of 377 $\Omega$/sq, the reflection loss is reduced to -20 ㏈(99% absorbance). This is attributed to the wave impedance matching controlled by ITO thin films at a given thickness of high permittivity dielectrics of λ/4 (3.5 mm for BT, 2.5 mm for PMN-PT and PMN-PZN at 2 ㎓). It is, therefore, successfully proposed that the ITO/ferroelectric materials with controlled surface resistance and high dielectric constant can be useful as a thin microwave absorbers in mobile telecommunication frequency band.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.196-198
• /
• 1994

The dielectric and electrical properties of $Pb(Mg_{1/3}Nb_{2\3})O_3-PbTiO_3-BaTiO_3$ have been investigated. Perovskite crystalline phase of the specimens are confirmed by XRD at $1270^{\circ}C$. The curie temperature is around $40^{\circ}C$ with the amount of $BaTiO_3$ and $PbTiO_3$. Every specimens shows the slim loop hysteresis curves which is electrostrictive characteristic. The strain vs. applied voltage characteristics exhibits nonlinear relationship, and the specimen of 0.85PMN-0.125PT-0.025BT shows the largest strain.