• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.23-29
• /
• 2006

Ultrasonic soldering of Si-wafer to FR-4 PCB at ambient temperature was investigated. The UBM of Si-substrate was Cu/ Ni/ Al from top to bottom with thickness of $0.4{\mu}m,\;0.4{\mu}m$, and $0.3{\mu}m$ respectively. The pad on FR-4 PCB comprised of Au/ Ni/ Cu from top to bottom with thickness of $0.05{\mu}m,\;5{\mu}m$, and $18{\mu}m$ respectively. Sn-3.5wt%Ag foil rolled to $100{\mu}m$ was used for solder. The ultrasonic soldering time was varied from 0.5 s to 3.0 s and the ultrasonic power was 1,400 W. The experimental results show that a reliable bond by ultrasonic soldering at ambient temperature was obtained. The shear strength increased with soldering time up to a maximum of 65 N at 2.5 s. The strength decreased to 34 N at 3.0 s because cracks were generated along the intermetallic compound between Si-wafer and Sn-3.5wt%Ag solder. The Intermetallic compound produced by ultrasonic soldering between the Si-wafer and the solder was $(Cu,Ni)_{6}Sn_{5}$.

• Tribology and Lubricants
• /
• v.35 no.1
• /
• pp.44-51
• /
• 2019

The paper presents the rotordynamic performance measurements and model predictions of a fuel cell electric vehicle (FCEV) air compressor supported on gas foil bearings (GFBs). The rotor has an impeller on one end and a thrust runner on the other end. The front (impeller side) and rear (thrust side) gas foil journal bearings (GFJBs) are located between the impeller and thrust runner to support the radial loads, and a pair of gas foil thrust bearings are located on both sides of the thrust runner to support the axial loads. The test GFJBs have a partial arc shim foil installed between the top foil and bump strip layers to enhance hydrodynamic pressure generation. During the rotordynamic performance tests, two sets of orthogonally installed eddy-current displacement sensors measure the rotor radial motions at the rotor impeller and thrust ends. A series of speed-up and coast-down tests to 100k rpm demonstrates the dominant synchronous (1X) rotor responses to imbalance masses without noticeable subsynchronous motions, which indicates a rotordynamically stable rotor-GFB system. Finite element analysis of the rotor determines the rotor free-free (bending) natural modes and frequencies well beyond the maximum rotating frequency. The predicted damped natural frequencies and damping ratios of the rotor-GFB system reveal rotordynamic stability over the speeds of interest. The imbalance response predictions show that the predicted critical speeds and rotor amplitudes strongly agree with the test measurements, thus validating the developed rotordynamic model.

• Publications of The Korean Astronomical Society
• /
• v.34 no.3
• /
• pp.31-40
• /
• 2019

We study the internal structure under the artificial mountain of Heumkyeonggak-nu, a Korean water-powered clock in the early Joseon dynasty. All the puppets on the artificial mountain are driven by the rotational force generated by the water wheel at their designated time. We design a model that work with three parts of the artificial mountain. At the upper part of the artificial mountain to the east, west, north and south, there are four puppets called the Four Mystical Animal Divinity and four ladies called the Jade Lady respectively. The former rotates a quarter every double hour and the latter rings the bell every hour. In the middle part of this mountain is the timekeeping platform with four puppets; the Timekeeping Official (Hour Jack), the Bell-, Drum-, and Gong-Warriors. The Hour Jack controls time with three warriors each hitting his own bell, drum, and gong, respectively. In the plain there are 12 Jade Lady puppets (the lower ladies) combined with 12 Oriental Animal Deity puppets. In his own time a lady doll pops out of the hole and her animal doll gets up. Two hours later, the animal deity lies down and his lady hides in the artificial plain. These puppets are regularly moved by the signal such as iron balls, bumps, levers, and so on. We can use balls and bumps to explain the concept of the Jujeon system. Iron balls were used to manipulate puppets of the timekeeping mechanism in Borugak-nu, another Korean water-powered clock in Joseon dynasty, which was developed earlier than Heumgyeonggak-nu. According to the North Korea's previous study (Choi, 1974), it is obvious that bumps were used in the internal structure of Heumgyeonggak-nu. In 1669, The armillary clock made by Song, I-young was also utilized bumps. Finally we presented mock-ups of three timekeeping systems.

• Journal of dental hygiene science
• /
• v.4 no.3
• /
• pp.133-140
• /
• 2004

It examines closely the occupation characteristic primary factor which the dentistry hygienic company field which is working to presence at a sickbed is undergoing the degree and from the research which it sees and it grasps the adaptation method against it gropes bitterly with development of the dentistry hygienic company individual to join in, it contributed in dentistry medical treatment service quality improvement and the research which tries to sleep it attempted. Currently the dentistry hygiene which works from Seoul and the condition area subject matter dentist unit, the dentistry hospital and the general hospital dentistry back it did in the object which it will burn. 116 issues which become frequency in question 120 it used SPSS 10.0 and it analyzed. Result of this study is as following. (1) Was expose that stress degree by factor feels about commonness on the whole, and angle prospects and support connection stress at company were the biggest item by item, and appeared as on the other hand relation connection stress with patient is the smallest. (2) Stress that stress degree by each receives in case of there are a lot of other businesses to characteristic businesses except appeared highest. On the other hand, was expose that feel the lowest stress degree an item that other a type of occupation and discord are. (3) 'Do action of that throw goods or closes the door bump' appeared article highest by short term adaptation method about stress, and 'Think and gives up by fate' appeared highest by special skill adaptation method. Short term adaptation method appeared high than special skill adaptation method on the whole but the difference appeared as is very small. (4) Stress degree comparison by general special quality was shown difference that stress by only dental hygiene administration of justice selection motive keeps in mind. (5) All of the result that compare short term, long term adaptation method about stress that feel new dental higienist apple career dental higienist same difference be, but displayed high result in same munhang. (6) Was expose that difference that keep in mind from all arguments in comparison of short term adaptation method by general special quality does not exist, on the other hand, comparison of long-term adaptation method displayed result that religion among only variable keeps in mind statistically.