• 대한안전경영과학회지
• /
• 제14권1호
• /
• pp.101-108
• /
• 2012

In this study was conducted numerical analysis to evaluate the stability of BTR(Built-in Timber Roof Tunneling Method), which is one of construction methods of underground structures in the non-opening state. The discretion method was applied to individually model reinforcing members of BTR, and the homogeneity analysis technic by area ratio was used to verify the feasibility comparing this result with that from conventional analysis method. The parameter study was performed to evaluate the effect varying ground depth, distance length of reinforcing supports and to verify the field applicability of new analysis method. The results showed the very precise value with allowable error, so this method can be applied in the field, The more length of supporting members caused the more vertical displacement and the top displacement increment of support members is larger than that of ground surace. The effect of ground depth was more impressive than that of distance length of reinforcing supports.

• PNF and Movement
• /
• 제9권4호
• /
• pp.49-55
• /
• 2011

Purpose : The aim of this study was to identify of bilateral trunk rotation(BTR) exercise and PNF exercise on gait in the individuals with malalignment syndrome. Methods : Subjects were 32 that were divided 2 groups in 20's generation. Interventions were trunk ratation exercise and PNF exercise. We used Medex for trunk rotation exercise. BTR group received exercise for three-sets (10min/set) along with stretching exercise ten-minutes, 3 times per week. PNF group took turns the D1 pattern in upper extremity and the D1 pattern in the opposite side of lower extremity for three-sets (10min/set). The measurement were force metatarsal 1 (FM 1), impulse metatarsal 1 (IM 1), force heel lat (FHL), impulse heel lat (IHL) by using footscan (RS scan). Statistical method was repeated measurement of ANOVA and p value was 0.05. Results : BTR and PNF group were significantly different in time(FM 1, IM 1, FHL, IHL). As different of right/left, BTR and PNF exercise were significantly different in FM 1, IM 1, FHL. Conclusion : BTR exercise was good exercise for malalignment but needs expensive equipment, for example, Medex. PNF exercise doesn't need expensive equipment but good method in malalignment syndrome person for gait ability. If PNF exercise is more experiment, PNF exercise could use variety for more patients.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 추계학술대회
• /
• pp.67-74
• /
• 2011

본 논문에서는 비개착 지하구조물 형성 공법의 하나인 BTR 공법에 대해 안전성을 평가하기 위해 수치해석을 실시하였다. 이를 위해 BTR 공법의 보강요소를 개별적으로 모델링하여 이산화해석을 실시하였고 면적비를 고려한 균질화 기법을 도입한 균질화 해석을 수행하여 지반에 발생하는 변위를 비교함으로써 균질화기법 적용의 타당성을 확인하였다. 해석 결과 이산화 해석과 균질화 해석은 변위발생 양상이 유사한 결과를 갖는 것을 알 수 있었다.

• 한국항만경제학회지
• /
• 제38권3호
• /
• pp.29-51
• /
• 2022

본 연구의 목적은 국제해사기구(IMO)의 배출규제해역(ECA) 시행에 따른 환경규제가 페리 선사들의 재무지표로 구성된 효율성에 어떠한 영향을 미쳤는지 실증적으로 분석하는데 있다. 이에 따라 본 연구에서는 2004년부터 2017년 까지 북유럽, 지중해, 북미 지역의 8개 페리선사의 재무데이터를 수집하여, ECA가 페리선사의 재무성과에 미친 영향을 효율성의 관점에서 지역별로 추정하였다. 방법론적 측면에서 본 연구의 학술적 기여는 다음과 같다. DEA의 자의적인 변수 선정 문제를 완화하기 위하여 Dyson et al.(2001)이 제시한 변수 선정 기준을 적용했으며, Network SBM DEA 모형을 통하여 기업의 규모를 고려하는 동시에 기업의 수익 창출 과정을 단계별로 구분하여 재무성과를 보다 세밀하게 측정하였다. 또한 BTR 모형을 적용하여 편의(Bias)를 최소화한 결과를 도출하였다. 연구 결과 가장 강한 규제를 받았던 북유럽 선사의 경우 오히려 효율성의 꾸준한 증가가 관측되었다. 북미지역 선사들의 경우 정부지원금이 효율성에 큰 영향을 미친 것으로 드러났으며, 상대적으로 ECA와 유가에 의한 영향은 적었던 것으로 관측되었다. 반면 지중해 지역의 경우 가장 낮은 수준의 규제를 받았음에도 불구하고, 규제 이후로 효율성 값이 낮아지는 모습이 관측되었다. 본 연구는 향후 ECA가 확대될 예정인 아시아의 페리선사와 정책당국에 의사결정의 참고자료로서 기능할 수 있을 것으로 생각된다.

• 원자력산업
• /
• 제7권2호통권48호
• /
• pp.50-60
• /
• 1987

• 한국전기전자재료학회논문지
• /
• 제22권6호
• /
• pp.537-545
• /
• 2009

In this paper, new parameters were developed to estimate the depth of anesthesia during a general anesthesia using EEG. Power spectral density(PSD) analysis was used for these parameters because EEG became slow wave during anesthesia. The new parameters were DTR, ATR, TDR, ADR, BTR and BDR applied to PSD. These parameters were compared with SEF which is conventionally used at clinic and confirmed clinical value. As the results, DTR, ATR, TDR, ADR among parameters were not useful compared with SEF but BTR and BDR is valuable for clinic. 15 patents, at pre-operation BDR the value is $265.36{\pm}25.29$, at induction the value is $129.23{\pm}34.92$, at operation the value is $154.99{\pm}38.34$, at awaked the value is $283.83{\pm}39.80$ and at post-operation the value is $234.80{\pm}23.46$. Also at pre-operation BTR value is $183.38{\pm}13.59$, at induction the value is $104.09{\pm}25.11$, at operation the value is $115.38{\pm}23.42$, at awaked the value is $190.33{\pm}23.31$ and at post-operation the value is $172.38{\pm}19.08$. Trend of BDR and BTR is similar to change of SEF, so two parameters are useful. to estimate the depth of anesthesia.

• Journal of Welding and Joining
• /
• 제35권1호
• /
• pp.79-88
• /
• 2017

The effect of residual metallic sodium on the solidification cracking susceptibility of type 316FR stainless steel was investigated via transverse-Varestraint tests. And a solidification brittle temperature range (BTR) of type 316FR stainless steel was 37 K. However, the BTR expanded from 37 to 67 K, as the amount of metallic sodium at the specimen surface increased from 0 to $7.99mg/cm^2$. Microstructural observation of the weld metal suggested that metallic sodium existed in the weld metal, including in the cell boundaries, during welding solidification. Thermodynamic calculations suggested that sodium expanded the temperature range of solidliquid coexistence during welding solidification of the steel weld metal. Therefore, the increased solidification cracking susceptibility (i.e., expansion of the BTR) in the residual sodium environment was attributed to enhanced segregation of sodium during the welding solidification; this segregation, in turn, resulted in an expanded temperature range of solid-liquid coexistence.

• Journal of Welding and Joining
• /
• 제34권5호
• /
• pp.54-60
• /
• 2016

In order to quantitatively evaluate the solidification cracking susceptibility in laser welds of three types of austenitic stainless steels (type 310: A mode, type 316-A: AF mode, type 316-B: FA mode solidifications), the laser beam welding (LBW) transverse-Varestraint tests consisted of multi-mode fiber laser, welding robot and hydraulic pressure system were performed. As the welding speed increased from 1.67 to 40.0 mm/s, the solidification brittle temperature range (BTR) of laser welds for type 316 stainless steels enlarged (316-A: from 37 to 46 K, 316-B: from 14 to 40 K), while the BTR for type 310 stainless steel reduced from 146 to 120 K. In other words, it founds that solidification cracking susceptibility could not be simply mitigated through application of LBW process, and the BTR variation behavior is quite different upon solidification mode of austenitic stainless steels.

• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.207-213
• /
• 2004

This paper describes the development of Behind-Tape-Reader (BTR) type DNC system using CYBER 180-830 as a central computer and IBM PC-AT cell control computer and NC lathe with FANUC 5T NC controller. In this system, the connection between central computer and cell control computer is done via RS-232C serial interface board, and that between cell control computer and FANUC 5T controller is done via parallel interface board. The software consists of two module, central computer communication module for NC program downloading and status uploading, NC machine running module for NC operating.

• Journal of Welding and Joining
• /
• 제34권5호
• /
• pp.61-69
• /
• 2016

A numerical simulation of the solid/liquid coexistence temperature range, using solidification segregation model linked with the Kurz-Giovanola-Trivedi model, explained the mechanism of the BTR shrinkage (with an increase in welding speed) in type 310 stainless steel welds by reduction of the solid/liquid coexistence temperature range of the weld metal due to the inhibited solidification segregation of solute elements and promoted dendrite tip supercooling attributed to rapid solidification of laser beam welding. The reason why the BTR enlarged in type 316 series stainless welds could be clarified by the enhanced solidification segregation of impurity elements (S and P), corresponding to the decrement in ${\delta}-ferrite$ crystallization amount at the solidification completion stage in the laser welds. Furthermore, the greater increase in BTR with type 316-B steel was determined to be due to a larger decrease in ${\delta}-ferrite$ amount during welding solidification than with type 316-A steel. This, in turn, greatly increases the segregation of impurities, which is responsible for the greater temperature range of solid/liquid coexistence when using type 316-B steel.