• 한국통신학회논문지
• /
• 제29권1B호
• /
• pp.41-51
• /
• 2004

OBS (Optical Burst Switching) 네트워크에 관한 연구가 최근 활발히 진행되고 있으나 OBS 네트워크 운용에 필수적인 OAM (Operation md Maintenance)에 대한 연구는 아직 다루어지고 있지 않다. 본 논문에서는 다섯가지 OBS 기능들, 즉 BT (Burst Termination), BTX (Burst Transmission), BSW (Burst Switching), RSC(Routing and Switching Control), 그리고 PAR (Protection and Restoration)을 정의하였고, 이 기능적 모델에 근거하여 네트워크 운용 요구 조건들을 만족시키기 위한 OAM 아키텍처를 설계하였다. 또한, OAM 수행에 필요한 OAM 동작들의 정의와 OAM이 가능한 ingress 에지, 코어, egress 에지 노드들의 구조, 그리고 OAM 정보 및 통신 모델과 프로토콜 등과 같은 OAM 구현을 위한 기본 체제를 제안하였다. 그리고, 제안된 OAM 아키텍처를 이용하여 OBS 네트워크에서 발생 가능한 여러 가지 장애들에 대한 OAM을 정리하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.173-179
• /
• 2012

본 논문에서는 부분 흡입형 초음속 터빈의 로터 블레이드에 ${\pm}15^{\circ}$의 스윕 각도를 적용하여 그에 의한 효과와 공력 특성을 살펴보기 위해 정상상태 유동해석과 비정상상태 유동해석을 동시에 수행하고 그 결과를 비교해 보았다. 3차원 Navier-Stokes 유동해석에는 상용 코드인 FLUENT 6.3 Parallel을 사용하였다. 모든 계산 케이스들에서 정상상태 유동해석에 비해 비정상상태의 경우가 손실이 더욱 크게 나오는 결과를 나타내었다. 후방스윕(BSW)모델은 기준모델(NSW)에 비해 팁 간극으로 빠져나가는 누설 손실량을 줄이는데 큰 효과가 있었고 비정상상태 유동 해석에서는 로터 출구면 정효율의 증가현상이 더욱 뚜렷하게 나타났다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권6호
• /
• pp.9-27
• /
• 2018

In recent years, the sales of bottled spring water (BSW) have been drastically increasing in Korea and other countries, which accompanied great interests in conservation and reclamation of natural mineral water (NMW). In this study, management and research activities on NMW in Europe, USA, and Codex Alimentarius were reviewed. In each region, NMW is regulated with its own quality standards that differ from ordinary drinking water, and management actions are strictly implemented to protect water resources and to secure quality of NMW. Many studies on NMW were carried out for monitoring inorganic constituents including major and trace elements in national levels for bottled NMW, groundwater, and tap water in other countries. In Korea, NMW became commercialized in 1995 when BSW was legally approved as a drinking water. To further promote utilization of various types of NMW in Korea, regulations and policies for NMW need to be revised in accordance with international NMW management trends. Further, studies of NMW that compile a comprehensive set of physical and chemical parameters of NMW are also needed to properly understand occurrences, hydrogeological and geochemical processes of NMW, as well as to evaluate its potential use as a natural resource.

• 대한수학회보
• /
• 제30권2호
• /
• pp.213-221
• /
• 1993

In this paper, we will show that the multiplicative group G in a finite ring R with identity 1 has a (B, N)-pair satisfying the following conditions; (1) G=BNB where B and N are subgroups of G. (2) B.cap.N is a normal subgroup of N and W = N/(B.cap.N), is generated by a set S = { $s_{1}$, $s_{2}$, .., $s_{k}$} where $s_{i}$.mem.N/(B.cap.N), $s_{i}$$^{2}$.iden.1 and $s_{i}$.neq.1. (3) For any s.mem.S and w.mem.W, we have sBw.contnd.BwB.cup.BswB. (4) We have sBs not .subeq. B for any s.mem.S. When G, B, N and S satisfy the above conditions, we say that the quadruple (G, B, N, S) is a Tits system. The group W is called the Weyl gorup of the Tits system.ystem.m.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권2호
• /
• pp.504-523
• /
• 2014

This paper presents a multiple-watermarking scheme for copyright protection and the prevention of illegal copying of mobile 3D contents with low resolution. The proposed scheme embeds a unique watermark and a watermark certification authority (WCA) watermark into the spatial and encryption domains of a mobile 3D content based on the buyer-seller watermarking protocol. The seller generates a unique watermark and embeds it into the local maximum curvedness of a 3D object. After receiving the encrypted watermark from the WCA, the seller embeds it into the encrypted vertex data using an operator that satisfies the privacy homomorphic property. The proposed method was implemented using a mobile content tool, and the experimental results verify its capability in terms of copyright protection and the prevention of illegal copying.

• 한국식품영양과학회지
• /
• 제28권2호
• /
• pp.383-389
• /
• 1999

To determine the optimum condition for buckwheat noodle making, we prepared noodle from com posite flours of buckwheat, wheat and corn starch, and those physical properties and sensory evalua tion were investigated. The weights of cooked noodle became lower with increasing buckwheat content level indicating that elution of its components to soup was high. Wheat flour in the composite flours probably caused to drop gelatinization temperature and maximum viscosity compared to buck wheat flours. Corn starch in the composite flours increase gelatinization temperature and maximum viscosity compared to buckwheat flours. From the result of farinogram, buckwheat flour lower water absorption ability, and increased dough development time compared to composite flours. Adhesiveness of the cooked noodle with wheat flour was decreased. Cohesiveness of the cooked noodle was decrea sed with increasing buckwheat flour level. In sensory evaluation, chewing and softness of noodle with 100% buckwheat flour was evaluated the best. In taste, BW1 and BSW1 noodles showed slightly higher preference although there was no significant differences.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2010년도 한국컴퓨터종합학술대회논문집 Vol.37 No.1(B)
• /
• pp.112-115
• /
• 2010

차량전장용 소프트웨어에 대한 합리적인 설계 및 테스트가 중요해졌다. 차량전장용 소프트웨어의 신뢰성을 검증하기 위해 AUTOSAR Conformance Test 표준이 마련되었는데, AUTOSAR Conformance Test 표준에는 테스트 대상, 테스트 커버리지, 테스트 요구조건 & 케이스 정의 및 테스트 아키텍처 환경에 대한 정의방법을 기술하고 있다. 본 논문에서는 차량전장용 소프트웨어의 안정성을 테스트하기 위해 소프트웨어가 저장되는 EEPROM 메모리에 대한 시뮬레이션 테스트를 수행하였으며, AUTOSAR 표준에 맞게 제작된 EEPROM Abstraction 시뮬레이션 모듈을 이용하였다. 또한 EEPROM Abstraction 시뮬레이션 모듈 위에서 AUTOSAR Conformance Test 표준에 정의된 적합성 테스트를 수행하기 위한 테스트 어댑터와 타겟 어댑터의 기능을 기술하고, EEPROM Abstraction 시뮬레이션 모듈에서 리얼타임 요소를 만족하기 위해 필요한 개선 사항을 제안하고자 한다.

• Structural Engineering and Mechanics
• /
• 제5권4호
• /
• pp.339-353
• /
• 1997

Fiber reinforced plastic (FRP) rods provide certain benefits over steel as concrete reinforcement, such as corrosion resistance, magnetic and electrical insulation, light weight, and high strength. FRP composites can be combined with a steel core to form hybrid reinforcing rods that take advantage of properties of both materials. The objective of this study was to characterize the bond behavior of hybrid FRP rods made with braided epoxy-impregnated aramid or poly-vinyl alcohol FRP skins. Eleven rod types were tested using two concrete strengths. Specific topics examined were bond strength, slip, and type of failure in concentric pull-out tests from concrete cubes. From analysis of identical pull-out tests on both hybrid and steel rods, information on relative bond strength and behavior were obtained. It is concluded that strength is similar but slip in hybrid rods is much higher. Hybrid rods failed either by pull-out or splitting the concrete block (with or without yielding of the steel core). Experimental data showed consistency with similar test results presented in the literature.

• International Journal of Computer Science & Network Security
• /
• 제21권5호
• /
• pp.222-230
• /
• 2021

The article reviews the issue of formation of information culture of social work bachelors in the process of their professional training. The main internal / external factors that determine the need for the information culture formation of social workers-to-be have been identified. To determine the levels of information culture formed in bachelors of social work criteria and their indicators have been substantiated. The model of information culture formation in BSW has been developed and implemented in Ukrainian universities under the following pedagogic conditions: organized informational environment; interconnection between general and professionally-directed courses; curriculum includes course directed on IC formation. The model contained interconnected components: aim - to achieve higher level of information culture formed; specific principles; content, interactive methods and forms of organization of educational process, methods of control and correction; components of information culture. The implemented mastered learning procedure has contributed to the leveling up of information culture formed in social work bachelors.

• 법제연구
• /
• 제53호
• /
• pp.149-176
• /
• 2017

4차 산업혁명이라는 표현은 널리 사용되고 있으며 그 의미도 다양하게이해되고 있다. 4차 산업혁명을 둘러싼 법적 문제에 대한 연구도 다양하게 진행되고 있으나 보통 인공지능이나 자율주행자동차, 사물인터넷, 3D 프린터 등의 세부적인 신기술의 소개나 그 규제방안에 대한 논의가 주를이루고 있다. 신기술의 규제를 위한 행정법의 대응을 산업혁명사를 통해살펴보면 대상이 되는 기술의 차이는 크지만 법적 관점에서는 전통적인위험방어에서부터 시작하여 규제전략의 다층화나 국제협력 요구와 같은오늘날 논의되는 내용과 크게 다르지 않다. 따라서 4차 산업혁명의 법적문제를 논하기 위해서는 신기술의 규제라는 문제를 넘어 전환기 행정법의 관점전환을 가져오는 단서개념을 포착해야 한다. 본 연구는 이를 위하여 단서개념으로서 디지털화를 전제하고 디지털화로 인해 변화하는 행정법의 문제를 적응능력, 조종능력으로 크게 나누어 개관하고 세부적으로는데이터 유통과 정보보호 및 보안, 임무이행방식의 변화 등을 소개하였다.