• Korean Journal of Applied Biomechanics
• /
• v.23 no.4
• /
• pp.395-402
• /
• 2013

The purpose of this study was to investigate change of mechanical energy before and after training of half vinyasa yoga. Thirteen subjects (height: $163.4{\pm}3.9$ cm, body mass: $54.9{\pm}7.3$ kg, age: $20.0{\pm}0.49$ yrs) participated in this experiment. The motions of half vnyasa yoga were captured with Vicon system and parameters were calculated with Visual-3D. After training of half vinyasa yoga, the mechanical energies of body segments were increased and increments of mechanical energies in the lower segments were greater than the upper segments. The phase increments of mechanical energies increased phase 1, phase 2, and phase 3 in order. After training of half vinyasa yoga, phase contributions of body segments were similar before training of half vinyasa yoga. The contribution of mechanical energy on trunk segment in body was the greatest contribution of upper segments; also that of mechanical energy on thigh segment in body was the greatest contribution of lower segments. Before training, the coefficient of correlation between vertical center of gravity (CoGz) and mechanical energy of phase 3 was a -.559, but after training, the coefficient of correlation between CoGz and mechanical energy of phase 2 was a .587. These findings suggest that the training of half vinyasa yoga may be increasing the mechanical energies of body segments.

• PNF and Movement
• /
• v.15 no.1
• /
• pp.13-25
• /
• 2017

Purpose: This study investigated the coordination and contribution of body segments during functioning. Methods: The relevant literature related to body segments and function were reviewed. Results: Efficient control of function is considered with regard to a participant's ability to perform a sequence of movements in body segments, which progresses from the head to the arm, trunk, pelvis, and leg segments. Each segment performs a specific role, which environment explorer using visual information for the head, reaching and grasping for the arms, a stabilizer for the trunk, and the distribution of COM in the pelvis and leg. Conclusion: During any of the movements, the momentum generated by the proximal segments is transferred to the adjacent distal segments in an appropriate sequence. In assessing function for clinical intervention strategies, the segment coordination, segment sequence, transfer of the center of body mass, asymmetrical ratio, muscle activity, and compensatory strategies should be considered.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.2
• /
• pp.240-244
• /
• 1997

This study was conducted in North Sulawesi, Indonesia to identify the factors affecting reproductive efficiency and to determine the contribution of each factor in reproductive efficiency of Indonesian native cows. Records of reproductive efficiency, body size (hip height, body weight, body length, heart girth) as well as age on one hundred and sixty seven Indonesian native cows (seventy six cows of the Bali breed and ninety one cows of the synthetic breed from unknown proportion of th Madura, the Sumba and the Ongole breeds) of 58 farmers were available in this research. The data were analyzed by covariance analysis using SAS package including reproductive efficiency as a dependent variable and breed, body size (hip height, body weight, body length, heart girth) and age of cows as independent variables. The contribution of each independent factor to dependent variable was estimated as the percentage of the sum of square in the corrected total sum of squares. The results showed that body weight and body size of cows would be considered as th most important factors affecting reproductive efficiency of Indonesian native cows. Therefore, the reproductive efficiency could be increased by 1) using cows that reached a target weight of at least 250 kg, 2) using cows with relatively well developed height at hip of at least 117 cm, heart girth of at least 150 cm, and body length of at least 125 cm, 3) keeping breeding cows that reach a target age of 24 months old with the maximum interval between postpartum and next breeding season of 90 days for each year, and 4) using good nutritional feeding to reach the optimum weight and body condition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.11
• /
• pp.1576-1584
• /
• 2008

In this study, canonical correlation analysis (CCA) was applied to estimate the relationship between three different sexual maturity traits (X set: days to first egg (DFE), weight of the first egg (WFE), body weight at first egg (BWFE)) and level of nutrient intake (Y set: energy (EI) and protein intake (PI)) or the egg production traits at two different periods (Z set: number of egg (NE1 and NET) and weight of egg (WE1 and WET) from 22 to 25 (Wfirst) and 22 to 33 wk of age (Wall), respectively), which were measured from 64 egg-type pullets (Isa Brown) manipulated for time of access to energy and protein sources to onset of egg production. Partial CCA (PCCA) was used to eliminate the contribution of differences in the levels of nutrient intake to canonical variables for X and Z sets at the first production period. Estimated canonical correlation coefficients between X set and Y set (0.429, p = 0.042), X set and Z set (0.390, p = 0.007 for Wfirst) and within Z set (between Wfirst and Wall; 0.780, p<0.001), and partial canonical correlation coefficient between X set and Z set (0.415, p = 0.009) were significant. Canonical weights and loadings from CCA indicated that the BWFE had the largest contribution compared to the DFE and WFE to variation of egg number produced at two different periods. The results from PCCA indicated that the contribution of PI and EI to the degree of the correlation between canonical variables for X and Z sets were unfavourable. In conclusion, the effect of body weight at sexual maturity upon the availability of nutrients can have a higher contribution to variation of egg production in pullets if the contribution of differences in nutrient intakes to onset of egg production were eliminated.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.785-794
• /
• 1999

The panel contribution analysis to reduce interior booming noise of a passenger car is carried out using both experimental method and numerical one. The accelerations of panels are measured on the outer surface of car body during operation. The acoustic characteristic of cavity is represented by two different ways. One is the acoustic transfer function obtained by experiment with reciprocal manner. The other is the boundary element model and numerical results of the model are calculated using SYSNOISE. The results from numerical method show more good agreement with measured sound pressure levels than the experimental one. Contributions of panels for interior noise are ranked and structure of the car is reinforced according to the results, which shows that the panel contribution analysis is a powerful tool to lessen structure-borne noise of passenger vehicle.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.2960-2967
• /
• 2021

In this work, a new hardening model is proposed for the depth-dependent hardness of ion-irradiated polycrystals with obvious grain size effect. Dominant hardening mechanisms are addressed in the model, including the contribution of dislocations, irradiation-induced defects and grain boundaries. Two versions of the hardening model are compared, including the linear and square superposition models. A succinct parameter calibration method is modified to parametrize the models based on experimentally obtained hardness vs. indentation depth curves. It is noticed that both models can well characterize the experimental data of unirradiated polycrystals; whereas, the square superposition model performs better for ion-irradiated materials, therefore, the square superposition model is recommended. In addition, the new model separates the grain size effect from the dislocation hardening contribution, which makes the physical meaning of fitted parameters more rational when compared with existing hardness analysis models.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.3
• /
• pp.317-325
• /
• 2011

The purpose of this study was to investigate the contributions of body joints to the kinetic energy of the clubhead in the golf swing. Three dimensional swing analysis was conducted on the seven KPGA golfers. The subjects were asked to swing with 45 inches of driver. The work done by body joints were computed by utilizing the inverse dynamics method. The order of work done by the body joints was lumbar > left hip > right shoulder > left wrist > right wrist > right hip at the first phase. At the second phase, the order of work done by the body joints was trunk > left elbow > right wrist > right shoulder > left wrist > right wrist. At the third phase, the order of work done by body joints was lumbar > right shoulder > left shoulder > left elbow > right wrist > right elbow. The sum of the work done by the body joints was lumbar > shoulder > wrist on the average. The kinetic energy of the club head was 430.11${\pm}$24.35 J and the subject's swing efficiency was shown as 31.82${\pm}$4.86% on the average. The contributions of body joints to the kinetic energy of the clubhead was the order of lumbar > upper right shoulder > left elbow > right wrist during the down swing.

• Journal of Korean Public Health Nursing
• /
• v.11 no.2
• /
• pp.83-93
• /
• 1997

This study was done for the purpose of investigating college students' body weight and health behavior. The subjects for this study were 1421 students obtained by a convenient sampling from one junior college located in Mok-Po. The data were analyzed by self-reporting questionnaire from June 18 to 28, 1996. The data were analyzed by descriptive statistics with SAS program. The results were as followed; Factors of comparatively high contribution to overweight were male students, perception they were healthy. smoking, alcohol drinking, irregular sleep and eating pattern, sleep for 9 hours over, regular exercise, no snack, diet control for weight loss. Factors of comparatively high contribution to underweight were female students. perception they were unhealthy. no smoking and alcohol drinking. irregular sleep and eating pattern. high rate of snack, sleep for 9 hours over. In conclusion overweight and underweight were correlated with seven health habits' and we suggest health education related to seven health habits.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.27-36
• /
• 2007

The purpose of this study was to investigate the effect of the upper body in order to increase a propulsive force in the old's walking. The subjects were each 10 males, the latter term of the aged and former term of the aged. There were three walking speeds of slow(about 5km/h), medium(about 6km/h), and maximum speed(about 7km/h). The subjects walking 11m were filmed the 5m section (from 3m to 8m) by 2-video cameras using three dimensional cinematography. And we computed different mechanical quantities and especially computed the relative momentum in order to achieve this study's aim. In this study, we was able to acquire some knowledge. The step length and step frequency increased in proportion to the walking speed, and the faster walking speed, the shorter ratio of supporting time( both legs supporting time/one step length time). When it was one leg support phase, the torso was indicated to generate the momentum in order to produce the propulsive force of walking. The upper and lower body had a cooperative relation for walking such as keeping step rate with the arms to legs and maintaining the body balance. The opposition phase for upward-and-downward direction of the torso and arms in walking was functioned to prevent the increase rapidly toward vertical direction of the center of gravity. The arms had contributed to coordinate the tempo of legs and the posture maintenance of the upper body. And by absorbing the relative momentum from the upper torso with arms to the lower torso, it had the rhythmical movement on upward-and-downward direction reducing the vertical reaction force. On account of the relations of absorption and generation of the propulsive force and the production of vertical impulse in the lower torso when walking by maximum speed, it was showed that the function of lower torso was come up as important problem for the mechanical posture stability and propulsive force coordination.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.4
• /
• pp.554-562
• /
• 2009

As a result of comparison analysis on body types of Korean women in their forties and Korean women residing in Japan, the following results had been found. 1. In terms of factors composing the body type, while women residing in Korea did not show large differences in obesity and horizontal size factors, women living in Japan showed higher contribution of obesity factor compared to horizontal size factor. That is, obesity factor was substantially more important among factors composing the body type for women residing in Japan. 2. Cluster analysis was done to understand the characteristics of body types and comparatively analyze them. Women residing in Korea were classified into tall and normal body, normal height with obese body, and short and chubby body. Women residing in Japan showed different characteristics with tall and obese body, tall and normal body with long lower part, and short and thin body. As a result of this study, identical ethnic group was found to take on different body types resulting from sociocultural differences and difference in eating habits if their place of residence differs for a long time.