• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.15-18
• /
• 2007

RoF 링크 시스템을 적용한 무선 근거리 통신망(IEEE 802.11b/g)의 중심 주파수 대역인 2.4 GHz에서 저가의 Febry-Perot 레이저 다이오드를 이용한 피드포워드 광송신기를 제작 및 측정 하였다. 제작된 피드포워드 광송신기의 측정 결과는 2.4 GHz에서 주신호의 간격이 10 MHz이고 크기가 -4 dBm인 입력 신호에서 피드포워드 보상기법을 적용하기 전보다 3차 상호 변조 왜곡 신호가 22.9 dB 개선되었다. 제작된 피드포워드 광송신기의 전자소자의 사양을 바탕으로 송신기 집적을 위한 RFIC회로(감쇄기, 증폭기)를 0.18 ${\mu}m$ 공정을 이용하여 설계하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.116-122
• /
• 2006

A fast scan digital-IF FFT receiver at the radio communication band is presented for spectrum monitoring applications. It is composed of three parts: RF front-end, fast LO board, and signal processing board. It has about 19GHz/s scan rate, multi frequency resolution from 10kHz to 2.5kHz, and high sensitivity of below -99dBm. The design and performance analysis of the digital-IF FFT receiver are presented.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.187-190
• /
• 2000

In this paper, A Feedforward Linear Power Amplifier which is appended a feedback loop for IMT-2000 was designed and fabricated. Feedback loop was used to improve the IMD(Inter-Modulation Distortion) characteristics of the main amplifier. And it is easy to cancel IMD on the min path and control IMD cancellation loop, compared with basic Feedforward Linear Power Amplifier. This feedback loop has the same effect of the Predistroter. So, This power amplifier was improved in IMD characteristics to add the effect of Predistroter to basic Feedforward amplifier. And the disigned power amplifier in this paper represented the 40dBm(10W) output and -55dBc 3rd IMD at center frequency 2.14GHz (@10MHz).

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.3
• /
• pp.444-448
• /
• 2006

In this paper, a frequency synthesizer for X-band FMCW radars is proposed. Some X-band FMCW radars have been used as a level sensor for tanker ship and the resolution of the level sensor may be mainly depend on linearity of frequency sweep. For a linear frequency sweep. the proposed synthesizer employs a phase-locked loop using prescalars and a high speed digital PLL chip. The measured results show that the linear frequency sweep range is from 10 GHz to 11 GHz and the output power of the synthesizer is minium 7 dBm. and the phase noise is about -80 dBc/Hz at 100 KHz offset from 11 GHz.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.322-325
• /
• 2003

A 7/21GHz frequency tripler, using a commercially available packaged pHEMT, was designed and fabricated on 15mil RO3003 substrate. Frequency conversion is realized using the third harmonic current of an class B amplifier with rejection feedback at fundamental with optimum load conductance at the third harmonic. The fabricated frequency tripler has achieved a conversion loss of 0.7dB for an input power of 0dBm at 21GHz. The experimental results show good agreement with the harmonic balance simulation.

• Journal of Navigation and Port Research
• /
• v.28 no.4
• /
• pp.293-297
• /
• 2004

In this papers, an S-band oscillator of the low phase noise property using a miniaturized micro-strip hairpin shaped ring resonator is presented The substrate has a dielectric constant $\epsilon_\gamma$＝3.5, a thickness h＝0.508 mm, and loss tangent $tan\delta$＝0.002. A designed and fabricated oscillator shows low phase noise performance of 99. 71 dBc/Hz at 100 KHz offset frequency and of output power 19.584 dBm at center frequency 2.450 GHz. This circuit was fabricated with hybrid technique, but can be fully compatible with the MMIC due to its entirely planar structure.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.756-761
• /
• 2009

In this paper, a X band voltage controlled oscillator is proposed. The oscillator uses a transistor as an oscillating element and its oscillating frequencies are controlled by the tuning voltage of varactor diode. Using the circuit simulation tools, the matching circuits between the transistor and varactor diode, its input and output matching circuits, and a feedback circuits are designed. The measured results of the fabricated oscillator show that its oscillation frequencies are from 10.50GHz to 10.88GHz according to the turning voltages of 1V to 18V, its output power levels are about 4.3dBm, and its phase noise is around -43.5dBc/Hz at 100kHz offset frequency of 10.5GHz.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.69-71
• /
• 2008

본 논문은 CPW 맴돌이형 공진기를 이용하여 설계한 발진기에 대하여 기술한다. 제안된 CPW 맴돌이형 공진기는 CPW 선로 주변과 접지면 사이에 다수개의 맴돌이 구조를 포함한다. 맴돌이형 공진기는 평면형 구조에서 비교적 높은 Q 값을 가지고 있기 때문에, 발진기의 출력뿐만 아니라, 위상 잡음 개선에도 좋은 영향을 끼친다. 또한 평면형 전송선로 구조이므로 마이크로스트립은 물론 CPW 구조로도 설계가 가능하다. 설계한 발진기를 실제로 측정하여 6.54GHz에서 3.98dBm의 출력 특성과 -118.1dBc/Hz @1MHz의 위상잡음 특성을 얻었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.219-225
• /
• 1998

A voltage controlled oscillator for the local oscillator in 380 MHz TRS handset is designed and fabricated. To improve the phase noise characteristics, the NEC's 2SC4226 transistor with NF=1.2 at 1 GHz and Toshiba's 1SV229 varactor diode with Q=70 are used. And an inductor of VCO is realized by microstrip line. At the bias condition of 5 V and 10 mA, the output power and phase noise in the operating frequency range of 357∼387 MHz are above 3.7 dBm and 111 dBc/Hz at 12.5KHz offset from the carrier, respectively. And FM sensitivity deviation are within ±0.4 KHz. This VCO is well suited for TRS handset.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.284-285
• /
• 2004

We have developed a 10 Gbps receiver consist of an InGaAs PIN PD and an embedded TIA(transimpedance preamplifier). The receiver is assembled in a small form factor (SFF) Package. It shows f-3dB of 10 GHz and the sensitivity more than -20 dBm at 10$^{-10}$ BER (bit-error-rate) for 10 Gbps optical input signal of 2$^{31}$-1 PRBS (pseudo-random-bit-sequence).